Beruflich Dokumente
Kultur Dokumente
NEW NEW
PRODUCT NAM
ES
W PRODUCT 2012
NAMES
12 NAMES
NEW ES
PRODUCT NAM
2012
NEW CT NAM
ES
2012
PRODU
knowledge to
All ROCKWOOL Technical Insulation solutions meet the most
stringent quality and safety standards. All ProRox and SeaRox
products and constructions have been tested according to the
PRODU
products offer the highest possible protection against heat and
energy loss, fire, noise and other unwanted influences. Our Table of contents
2012
PRODUCT NA
MES
NAMES
experts will be delighted to share their knowledge and advise
you in drawing up technical and project specifications. ProRox - Industrial insulation 4-32
2012
is with ROCKWOOL Technical Insulation premium products,
and the detailed information and expert tools that come with Products
them, which always incorporate the latest technical findings. roRox PS 960
P Rockwool 850 8
Thats why you should always check that the information ProRox PS 970 Rockwool 851 10
and tools you have are up-to-date. If you have any questions ProRox WM 940NL Rockwool 160 12
about specific application issues, working methods or product ProRox WM 950NL Rockwool 164 14
properties, please visit our website at www.rockwool-rti.com ProRox WM 960NL Rockwool 159 16
or contact us on +31(0)475 35 38 35. ProRox WM 970NL Rockwool 168 18
NEW
ProRox MA 520 ALU Rockwool Duraflex 20
The ROCKWOOL Group, +75 years of experience ProRox SL 920 Rockwool Flexiboard 21 S
T NAM
E
2012
ROCKWOOL Technical Insulation is a subsidiary of the ProRox SL 930 Rockwool Multiboard PRODUC 22
ROCKWOOL Group, the worlds largest and most experienced ProRox SL 940 Rockwool 231 23
producer of stone wool products. ROCKWOOL International ProRox SL 950 Rockwool HT 600 24
A/S is based in Hedehusene, Denmark. The parent company ProRox SL 960 Rockwool 233 25
has net turnover of around 1.97 billion in 2012. ROCKWOOL ProRox SL 970 Rockwool HT 660 26
International has 27 factories in Europe, North America and ProRox SL 980 Rockwool HT 700 27
Asia, and has around 9,700 employees. ProRox SL 540 Rockwool 251.001 28
ProRox SL 560 Rockwool 251 29
ROCKWOOL has a melting point above 1000C ProRox SL 580 Rockwool CRS 30
ROCKWOOL products withstand temperatures up to 1000C, ProRox LF 970 Rockwool Loose Fill 31
making them exceptionally resistant to fire. This resistance ProRox GR 903 Rockwool Granulate 32
can slow a fires progress and buy precious time for rescue
operations while helping to protect the buildings structure Delivery & storage 33
from unnecessary damage. Yet while heat and flames are bad
enough in a fire, smoke is the serious danger. It can suffocate
occupants, and it can incapacitate people who might otherwise
have been able to escape. ROCKWOOL insulation keeps toxic
smoke from insulation to a minimum for even greater safety.
Product range
2 last digits = other product characteristics
4
ProRox
Industrial insulation
In the view of our rebranding strategy we have adapted and
clarified the entire range of ROCKWOOL Technical Insulation
products. From now on, all our insulation solutions for
technical installations in the process industry will be part of
the ProRox range. The main characteristic of these products
istheir high thermal insulation capacity. Next to this, they
ofcourse also comply with the most stringent requirements
onfire resistance and acoustic insulation. Below you will get
anoverview of the ProRox range and its new names.
5
Industrial insulation
Application selector
Thermal insulation
Pipe work
<356 >356
6
Thermal insulation
Remarks D
IN 4140 (Insulation work on industrial installations
Due to an almost limitless range of applications, and building equipment)
we have not provided detail information for all the B
S 5970 (Code of practice for the thermal insulation
applications. Information is available in the following of pipework, ductwork, associated equipment and
manuals/standards for industrial insulation: other industrial installations)
CINI manual Insulation for industries 7
AGI Q101 (Insulation work on power plant For specific applications, our ROCKWOOL Technical
components) Insulation sales team will be pleased to advise you.
NEW
ProRox PS 960 NAME Old name: Rockwool 850 Pipe Section
All pipe sections 1000 mm in 83 2800 2400 2000 1992 1694 1098 864
length. 89 2400 2400 1600 1944 1650 1080 848
102 2000 1600 1600 1694 1440 912 714
108 2000 1600 1944 1650 1400 896 714
Other dimensions 114 1600 1600 1896 1480 1260 880 700 468
(up to diameters of 121 1600 1600 1694 1440 1098 864 686 468
915mm) are available
127 1600 1968 1672 1400 1080 848 672 456
upon request.
133 1992 1920 1480 1260 1062 742 672 456
140 1944 1716 1440 1116 1044 728 564 444
159 1650 1440 1116 1044 880 686 468 360
169 1440 1400 1080 896 848 672 456 350
194 1098 1400 880 728 700 468 360 330
219 896 1062 728 686 564 444 340 320
245 728 880 672 552 456 350 330 240
267 686 714 480 456 444 340 310 232
273 686 672 480 456 360 330 248 232
280 672 672 468 444 360 330 248 232
305 468 564 444 350 340 310 232 224
324 456 444 350 340 330 240 224 216
356 350 340 330 320 248 232 216 156
368 340 340 320 310 240 224 216 150
406 320 310 240 232 224 216 150 144
419 280 240 232 224 208 150 144
456 232 224 216 208 150 144 102
508 216 156 150 150 138 96 96
558 150 144 144 138 96 90 60
610 138 96 96 90 56 56
8
Applications mechanical load. As a guide, thefollowing
ProRox PS 960 is a pre-formed stone wool pipe intermediate distances can be used:
section. Thesections are supplied split and hinged for Horizontal pipe work: 3 to 4 m
easy snap-on assembly, and are suitable for the Vertical pipe work: 5 to 6 m
thermal and acoustic insulation of industrial pipe work.
Finishing
Compliance All pipe sections should be finished with a metal
ProRox PS 960 Pipe Sections full comply with the (e.g.aluminium) cladding. Where necessary,
requirements as set by internationally recognized expansion joints arerequired to cater for expansion of
Note standards like EN14303, CINI 2.2.03, ASTM C547: the pipes. Both the lengthwise and circular joints are
All steel components Grade A for type I, II, IV. fastened with sheet-metal screws: hard aluminium or
exposed to a corrosive stainless steel 1/2, 8 per metre. Close expansion
environment should be Installation guidelines joints with a steel tensioning wire. Connections to
cleaned, degreased and Assembly mountings, head and end caps, etc. should be made
coated with a protective Fit the ProRox PS 960 closely around the pipe, with watertight using an appropriate sealant.
finish. thelengthwise (horizontal) joint turned towards the
underside. The lengthwise joints must be staggered at
an angle of at least 30 degrees to each other. The shell
is secured with galvanised binding wire (thickness Advantages
0.5mm, at least 3/m). For insulation thickness above Excellent fit provides optimal performance
100 mm (or temperatures >250C) the insulation Easy to handle and to install
should be applied in at least two layers. In the case of Wide range of diameters and insulation
multi-layer insulation it is recommended that the thicknesses
lengthwise and crosswise joints are staggered Suitable for use over stainless steel
(masonry bond). For temperatures up to 350C, a support
construction isnot generally necessary
Support construction
On pipes where mechanical loading (e.g. strong
vibrations) of the insulation is expected and/or the
temperature is higher than 300C, a support structure
(spacers) should beconstructed. The number of
spacers depends on the temperature and the
Product properties
Performance Norms
< 1 kg/m 2
EN 13472
Water absorption
Water vapour absorption (Vapor sorption) 0.02%vol ASTM C1104/C1104M
Water vapour diffusion resistance =1 EN 14303
Air Flow Resistivity > 80 kPa.s/m 2
EN 29053
Designation code MW EN 14303-T9(T8 if Do<150)-ST(+)650-WS1-CL10 EN 14303
9
NEW
ProRox PS 970 NAME Old name: Rockwool 851 Heavy duty pipe section
10
Applications spacers depends on the temperature and the
ProRox PS 970 is a pre-formed high density stone wool mechanical load. As a guide, thefollowing
pipe section. The sections are supplied split and hinged intermediate distances can be used:
for easy snap-on assembly, and are especially suitable Horizontal pipe work: 3 to 4 m
for the thermal and acoustic insulation of industrial Vertical pipe work: 5 to 6 m
pipe work which is exposed to high temperature and
light (e.g. vibrations) mechanical loads. Finishing
All pipe sections should be finished with a metal
Compliance (e.g.aluminium) cladding. Where necessary,
ProRox PS 970 Pipe Sections full comply with the expansion joints arerequired to cater for expansion of
requirements as set by internationally recognized the pipes. Both the lengthwise and circular joints are
Note standards like EN14303, CINI 2.2.03, ASTM C547: Grade fastened with sheet-metal screws: hard aluminium or
All steel components A for type I, II, IV. stainless steel 1/2, 8/metre. Close expansion joints
exposed to a corrosive with a steel tensioning wire. Connections to
environment should be Installation guidelines mountings, head and end caps etc. should be made
cleaned, degreased and Assembly watertight using an appropriate sealant.
coated with a protective Fit the ProRox PS 970 closely around the pipe, with the
finish. lengthwise (horizontal) joint turned towards the
underside. The lengthwise joints must be staggered at
an angle of at least 30 degrees to each other. The shell Advantages
is secured with galvanised binding wire (thickness 0.5 Suitable for heavy duty applications which
mm, at least 3/m). For insulation thickness above 100 are exposed to high temperatures and high
mm (or temperatures >250C) the insulation should be mechanical loads
applied in at least two layers. In the case of multi-layer Excellent fit provides optimal performance
insulation it is recommended that the lengthwise and Easy to handle and to install
crosswise joints are staggered (masonry bond). Wide range of diameters and insulation
thicknesses
Support construction Suitable for use over stainless steel
On pipes where mechanical loading (e.g. strong For temperatures up to 350C, a support
vibrations) of the insulation is expected and/or the construction isnot generally necessary
temperature is higher than 300C, a support structure
(spacers) should beconstructed. The number of
Product properties
Performance Norms
< 1 kg/m 2
EN 13472
Water absorption
Water vapour absorption (Vapor sorption) 0.02%vol ASTM C1104/C1104M
Water vapour diffusion resistance =1 EN 14303
Air Flow Resistivity > 90 kPa.s/m 2
EN 29053
Designation code MW EN 14303-T9(T8 if Do<150)-ST(+)680-WS1-CL10 EN 14303
11
NEW
ProRox WM 940NL NAME Old name: Rockwool 160 Wired mat
Applications Advantages
ProRox WM 940NL is a lightly bonded stone wool mat Excellent thermal insulation
stitched on galvanised wire mesh using galvanised wire. Suitable for use over irregular surfaces
The wired mat is suitable for thermal acoustic Available in a wide range of thicknesses up to
insulation of industrial applications reachting high 120mm
temperatures, such as industrial pipe work, boiler Suitable for use over stainless steel
walls, furnaces and smoke ducts. Stainless steel mesh,
stainless steel binding wire and/or aluminium foil
facing are available upon request.
Compliance
ProRox WM 940NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I and II.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 EN 12667
Thermal conductivity
(W/mK) 0.039 0.047 0.055 0.064 0.075 0.088 0.103 0.119 0.157 0.205 ASTM C177
Support construction
Given the limited pressure resistance of wired mats,
inmostcases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3to4 metres.
13
NEW
ProRox WM 950NL NAME Old name: Rockwool 164 Wired mat
Applications Advantages
ProRox WM 950NL is a lightly bonded stone wool mat Suitable for high temperature application
stitched on galvanised wire mesh using galvanised wire. Flexible application
The wired mat is suitable for thermal and acoustic Available in a wide range of thicknesses
insulation of industrial applications reaching high Suitable for use over stainless steel
temperatures, such as industrial pipe work, boiler
walls, furnaces and smoke ducts.
Compliance
ProRox WM 950NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I, II and III.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 640
Thermal conductivity EN 12667
(W/mK) 0.039 0.045 0.053 0.062 0.072 0.084 0.097 0.112 0.146 0.192 0.213
Support construction
Given the limited pressure resistance of wired mats,
in mostcases a support is required for the board
cladding. Asa guideline, assume that a support is
required every 3 to 4 metres.
15
NEW
ProRox WM 960NL NAME Old name: Rockwool 159 Heavy duty wired mat
Applications Advantages
ProRox WM 960NL is a lightly bonded heavy stone wool Suitable for heavy duty applications which
mat stitched on galvanised wired mesh with galvanised are exposed to high temperatures and high
wire. The wired mat is especially suitable for industrial mechanical loads
installations such as high-pressure steam pipes, Resistant to high temperatures
reactors, furnaces, etc. where high demands are made Flexible application
on the temperature resistance of the insulation. Available in a wide range of thicknesses
Suitable for use over stainless steel
Compliance
ProRox WM 960NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and ASTM C592
Type I, II and III.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 660 EN 12667
Thermal conductivity
(W/mK) 0.039 0.045 0.052 0.059 0.068 0.078 0.089 0.102 0.131 0.167 0.191 ASTM C177
Support construction
Given the limited pressure resistance of wired mats,
inmostcases a support is required for the board
cladding. As a guideline, assume that a support is
required every 3to4 metres.
17
NEW
ProRox WM 970NL NAME Old name: Rockwool 168 Heavy duty wired mat
Applications Advantages
ProRox WM 970NL is a lightly bonded heavy stone wool Suitable for heavy duty applications which
matstitched on galvanised wired mesh with galvanised are exposed to high temperatures and high
wire. The wired mat is especially suitable for industrial mechanical loads
installations where high temperature and vibration Resistant to high temperatures
resistance is required. Flexible application
Available in a wide range of thicknesses
Compliance Suitable for use over stainless steel
ProRox WM 970NL Wired Mats fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.02 and
ASTM CC592 Type I, II and III.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 680 EN 12667
Thermal conductivity
(W/mK) 0.040 0.045 0.051 0.058 0.066 0.075 0.085 0.096 0.123 0.157 0.188 ASTM C177
18
Note Installation guidelines
All steel components Assembly Finishing
exposed to a corrosive Cut the wired mat to length, so that the mat fits the The insulation should be finished with a metal
environment should be pipe with slight pre-stressing. The closing joints (e.g.aluminium) cladding. Where necessary expansion
cleaned, degreased and mustbe staggered at an angle of at least 30 degrees joints areprovided to cater for expansion of the pipes.
coated with a protective to each other. The closing joints of the mats Both the lengthwise and circular joints are fastened
finish. (lengthwise and circular joints) must be wired together with sheet-metal screws: hard aluminium or stainless
using steel wire (min. 0.5mm) or secured with mat steel 1/2, 8/metre. Close the expansion joints with a
hooks. Stainless steel pipes and pipes with a steel tensioning wire. Connections to mountings, head
temperature of > 400C should preferably be insulated and end caps, etc. shouldbe made watertight using a
with ProRox WM 970 SWNL, in which both the mesh and suitable sealant.
the stitching wire is in stainless steel. If the mats are
assembled in multiple layers, both the lengthwise and
circular joints must be staggered (masonry bond).
Support construction
Given the limited pressure resistance of wired mats,
in mostcases a support is required for the board
cladding. Asa guideline, assume that a support is
required every 3to4 metres.
19
NEW
ProRox MA 520 ALU NAME Old name: Rockwool Duraflex Load bearing mat
Product properties
Performance Norms
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread=passed, ASTM E84 (UL 723)
Smoke development=Passed
Nominal density 60 kg/m3 (3.7 lb/ft3)
Chloride content < 10 ppm (AS - Quality) EN 13468
Conforms to the stainless steel corrosion specification ASTM C795
Water leachable chloride content
as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
< 1 kg/m2 EN 14303
Water absorption
Water vapour absorption (Vapor sorption) 0.02%vol EN 12086
=1 EN 14303
Water vapour diffusion resistance
Sd > 200 m (for Alu-foil faced product) EN 12086
Compression resistance > 10 kPa (at 10% deformation) EN 826
Air Flow Resistivity > 20 kPa.s/m 2
EN 29053
Designation code MW EN 14303-T3-ST(+)500-CS(10)10-WS1-MV2-CL10 EN 14303
20
NEW
ProRox SL 920 NAME Old name: Rockwool Flexiboard Flexible slab
MW EN 14303-T4(T3 if t<60)-ST(+)250-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)250-WS1-MV2
(for Alu-foil faced product)
Installation guidelines
Mechanically fix ProRox SL 920 using self-adhesive is a risk of condensation, the insulation should be
or welded pins. provided with a vapour barrier. Forexternal
In the case of aluminium foil facing, finish length applications, the insulation should be finished
wise and crosswise joints with a self-adhesive witha metal, (e.g. aluminium) watertight
aluminium tape (75mm). When insulating objects covering. 21
colder than the ambient temperature, where there
NEW
ProRox SL 930 NAME Old name: Rockwool Multiboard Load bearing mat
Available on request with a one-sided facing of fibreglass reinforced aluminium foil (Alu) or glass tissue
Product properties
Performance Norms
MW EN 14303-T4(T3 if t<60)-ST(+)350-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)350-WS1-MV2
(for Alu-foil faced product)
Installation guidelines
Mechanically fix ProRox SL 930 using self-adhesive insulating objects colder than the ambient
or welded pins. Due to the rigidity of the product, it temperature, where there is a risk of condensation,
can also be mounted in cassettes. the insulation should be provided with a vapour
In the case of aluminium foil facing, finish barrier. The insulation should be finished with a
lengthwise and crosswise joints with a self- metal (e.g. aluminium), watertight covering.
22 adhesive aluminium tape (75 mm). When
NEW
ProRox SL 940 NAME Old name: Rockwool 231
Product properties
Performance Norms
MW EN 14303-T4(T3 if t<60)-ST(+)400-WS1
Designation code EN 14303
MW EN 14303-T4(T3 if t<60)-ST(+)400-WS1-MV2
(for Alu-foil faced product)
23
NEW
ProRox SL 950 NAME Old name: Rockwool HT600 Rigid slab
Compliance
ProRox SL 950 Slabs fully comply with the
requirements as set by internationally recognized
standards like EN14303, CINI 2.2.01 and ASTM C612
Type IA, IB, II, III, IVA and IVB.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 640 EN 12667
Thermal conductivity
(W/mK) 0.039 0.045 0.053 0.062 0.073 0.084 0.097 0.112 0.144 0.186 0.205 ASTM C177
24
NEW
ProRox SL 960 NAME Old name: Rockwool 233
Compliance
ProRox SL 960 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA and IB.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 EN 12667
Thermal conductivity
(W/mK) 0.039 0.045 0.052 0.060 0.071 0.081 0.094 0.107 0.140 ASTM C177
25
NEW
ProRox SL 970 NAME Old name: Rockwool HT 660 High temperature slab
Compliance
ProRox SL 970 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA, IB, II, III,
IVA and IVB.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 680 EN 12667
Thermal conductivity
(W/mK) 0.041 0.046 0.056 0.068 0.077 0.087 0.099 0.128 0.162 0.162 0.196 ASTM C177
26
NEW
ProRox SL 980 NAME Old name: Rockwool HT 700 Heavy duty slab
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
(W/mK) 0.040 0.044 0.049 0.055 0.062 0.069 0.077 0.086 0.106 0.130 0.158
27
NEW
ProRox SL 540 NAME Old name: Rockwool 251.001
Compliance
ProRox SL 540 Slabs comply with the requirements as
set by EN14303, CINI 2.2.01 and ASTM C612: type IA, IB,
II, III, IVA...
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
(W/mK) 0.042 0.047 0.052 0.057 0.064 0.072 0.082 0.093 0.117 0.147 0.181
28
NEW
ProRox SL 560 NAME Old name: Rockwool 251
Compliance
ProRox SL 560 Slabs comply with the requirements as
set by EN14303, CINI 2.2.01 and ASTM C612: type IA, IB,
II, III, IVA.
Product properties
Performance Norms
T (C) 50 100 150 200 250 300 350 400 500 600 700 EN 12667
Thermal conductivity
(W/mK) 0.042 0.047 0.052 0.057 0.064 0.072 0.082 0.093 0.117 0.147 0.181
29
NEW
ProRox SL 580 NAME Old name: Rockwool CRS Compression resistant slab
Compliance
ProRox SL 580 Slabs fully comply with the requirements
as set by internationally recognized standards like
EN14303, CINI 2.2.01 and ASTM C612 Type IA, IB, II, III,
IVA and IVB.
Product properties
Performance Norms
EN 14706
Maximum Service Temperature 250C (482F)
ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread=passed, ASTM E84 (UL 723)
Smoke development=Passed
Nominal density 150 kg/m3 (9.4 lb/ft3) EN 1602
30
NEW
ProRox LF 970 NAME Old name: Rockwool Loose Fill Loose Fill
Product properties
Performance Norms
EN 14706
Maximum Service Temperature 680C (1256F)
ASTM C411
EuroClass A1 EN 13501-1
Reaction to fire Surface burning characteristics; Flame spread=passed, ASTM E84 (UL 723)
Smoke development=Passed
< 1 kg/m2 EN 1609
Water absorption
Water vapour absorption (Vapor sorption) 0,02%vol ASTM C1104/C1104M
Chloride content < 10 ppm EN 13468
AS quality Conforms to the stainless steel corrosion specification ASTM C795
(Water leachable chloride content) as per ASTM test methods C 692 and C 871
< 10 mg/kg (ph-value neutral to slightly alkaline) ASTM C871
Water vapour diffusion resistance =1 EN 12086
31
NEW
ProRox GR 903 NAME Old name: Rockwool Granulate Granulate wool
Product properties
Performance Norms
Installation guidelines
The guidelines for the use of granulate wool in cold
applications are given in the AGI Q 118 standard.
Theseguidelines are available on request. Please
askyourROCKWOOL Technical Insulation sales
consultant.
32
Delivery and storage
ROCKWOOL Technical Insulation can accept no liability Advice
for any faults in installation and deficiencies. The ROCKWOOL Technical Insulation offers more than just
respective terms of general sale and delivery of the rapid delivery of the right product. ROCKWOOL can
ROCKWOOL bv, lodged with the Commercial Court also act as your partner during thedesign phase to
under number 13014428. A copy of these conditions help to resolve technical problems, such as providing
can be provided on request. advice for complex technical insulation calculations,
construction advice and help with drafting specifications.
Delivery service
ROCKWOOL Technical Insulation strives to make all
its products readily available. Deliverynormally takes All the values given in this publication are
place from our dealers warehouses. However, direct indicative average values, subject to manufacturing
delivery by ROCKWOOL Technical Insulation to the site tolerances. ROCKWOOL Technical Insulation retains
of installation is also possible. To simplify construction the right to change product specifications at any
site logistics, deliveries using containers can be time without prior notice.
arranged. Contact your dealer for more information.
33
Notes
34
35
ROCKWOOL Technical Insulation
RTI/11.13/1.0k/Exp 751
ROCKWOOL Technical Insulation, a subsidiary of the All explanations correspond to our current range of knowledge
international ROCKWOOL Group, is the worldwide market and are therefore up-to-date. The examples of use outlined in
leader in technical insulation. With our comprehensive product this document serve only to provide a better description and
lines ProRox and SeaRox we cover the whole industrial market do not take special circumstances of specific cases into
and marine & offshore industry, providing a full range of account. ROCKWOOL Technical Insulation places great value
products and systems for the thermal and firesafe insulation upon continuous development of products, to the extent that
of technical applications. Besides sustainable products we we too continuously work to improve our products without
offer reliable expert advice, from documentation to delivery prior notice. We therefore recommend that you use the most
and after sales service. Throughout the whole chain from recent issue of our publications, as our wealth of experience
specifier, through dealer to contractor and installer we aim to and knowledge is always growing. Should you require related
add value. We dont just sell products, we supply solutions. information for your specific application or have any technical
Itsthis total approach that makes us the ideal choice for queries, please contact our sales department or visit our
professionalism, innovation and trust. website www.rockwool-rti.com
Delfstoffenweg 2
6045 JH Roermond
The Netherlands
Tel. +31 (0) 475 35 38 35
Fax + 31 (0) 475 35 36 40
E-mail: rti.export@rockwool.com
www.rockwool-rti.com
ROCKWOOL Technical Insulation, ROCKWOOL, SeaRox and ProRox are registered trademarks