Beruflich Dokumente
Kultur Dokumente
Art.-Nr. 1000580
Description:
Rainwater filter with plastic shaft extension Connection capacity according to DIN 1986
tube for direct installation in the ground before for roof areas up to 350 m.
the tank, with locking lid.
Max. Flow Rate Sieve insert 1,5 l/sec
This extension permits an easy adaptation to = 5,4 m cleaned water per hour.
the height proportions at the moment of the
installation on site. If necessary, the Height difference between inlet and outlet just
telescopic extension can also be shortened. 300 mm.
It is also possible to use several extensions.
The cleaned water can be used in washing
Two step cleaning system, therefore high machines, toilet flushing and garden watering,
level of filtering efficiency, independent of in homes, in commerce, in public buildings
flow rate. and in industry.
Due to the steep inclination of the filter The filter has to be cleaned depending on the
cartridge the dirt is continuously cleaned contamination 1 - 2 times during the year.
away into the sewer.
How it works:
1. As water arrives the level builds up and is 4. Cleaned water flows to the tank.
equally distributed across the cascade.
5. Dirt goes to the sewer. 1
2. Pre cleaning through the cascades.
Largest dirt particles are led across the
primary filter cascades directly to the
sewer. 2
3
3. Pre filtered water then flows over the
secondary filter sieve (mesh size 0,65 mm). 4
Due to the special mesh structure of the
sieve, any dirt washes directly into the
sewer which means the filter is self
cleaning, with very low maintenance. 5
Technical Data:
Weight: 10,2 kg
www.3Ptechnik.de
Example 1: Example 2:
Accessories 1: Accessories 2:
EAN:
4018712000207