Beruflich Dokumente
Kultur Dokumente
Approved: Revision: A
INCH PREFERRED HARDWARE Page 1 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein to the extent specified.
2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS SP-6
Nuts
Prefix Status Plating Noun Material Description
1D Inactive Nut-Hex Use 61D
2D Inactive Nut-Hex Use 62D
3D Non preferred E Nut- Hex Slotted Grade 2 Coarse, Six slots
4D Preferred E Nut- Hex Castle Grade 2 Fine, Six slots
5D Non preferred ER Nut- Hex Castle ASTM A-307 Coarse
6D Preferred ER Nut- Hex Castle ASTM A-307 Fine
7D Preferred E Nut- Hex Jam Grade 2 Coarse
8D Preferred E Nut- Hex Jam Grade 2 Fine
9D Inactive Nut- Hex Use 61D
10D Inactive Nut- Hex Use 62D
11D Inactive Nut-Hex Use 7D
12D Preferred E Nut-Hex Machine Carbon Steel Coarse, Machine screw nut
13D Non preferred E Nut-Hex Jam LH Grade 2 Fine, Left Hand thread
14D Preferred E Nut-Hex Machine Carbon Steel Fine, Machine screw nut
15D Non preferred Plain Nut-Hex Brass Coarse
16D Non preferred E Nut-Wing Carbon Steel Coarse, Larger sizes
17D Inactive Nut-Locking Use 59D
18D Inactive Nut-Locking Use 60D
19D Non preferred E Nut-Wing Carbon Steel Coarse, Smaller sizes
20D Inactive Nut-Locking Use 85D
21D Inactive Nut-Locking Use 86D
22D Non preferred E Nut-Wing Carbon Steel Fine, Smaller sizes
23D Non preferred E Nut-Wing Carbon Steel Fine, Larger sizes
24D Non preferred ER Nut-Square ASTM A-563 Coarse
26D Inactive Nut- Locking Use 85D
27D Inactive Nut-Locking Use 86D
28D Inactive Nut-Locking Use 85D
29D Inactive Nut- Locking Use 86D
30D Non preferred Plain Nut-Weld Carbon Steel Short pilot, Oiled
31D Non preferred Plain Nut-Weld Carbon Steel Short pilot, Oiled
32D Preferred Plain Nut-Weld Carbon Steel Long pilot, Oiled
33D Preferred Plain Nut-Weld Carbon Steel Long pilot, Oiled
34D Non preferred Plain Nut-Weld Carbon Steel Short pilot, Oiled
35D Non preferred Plain Nut-Weld Carbon Steel Short pilot, Oiled
36D Non preferred Plain Nut-Weld Carbon Steel Long pilot, Oiled
37D Non preferred Plain Nut-Weld Carbon Steel Long pilot, Oiled
38D Inactive Nut-Hex High Use 63D
39D Inactive Nut- Hex High Use 64D
40D Non preferred E Nut-Slotted Grade 2 Coarse, High
41D Non preferred E Nut-Slotted Grade 2 Fine, High
42D Inactive Nut-Locking Use 85D
43D Inactive Nut-Locking Use 86D
44D Inactive Nut-Locking Use 85D
45D Inactive Nut-Locking Use 86D
Approved: Revision: A
INCH PREFERRED HARDWARE Page 2 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein to the extent specified.
2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS SP-6
Nuts (continued)
Prefix Status Plating Noun Material Description
* These parts shall have a supplementary application of lubricating wax applied to the threads per the plating spec.
Approved: Revision: A
INCH PREFERRED HARDWARE Page 3 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Washers
Prefix Status Plating Noun Material Description
2E Inactive Washer-Lock Use 4E
3E Inactive Washer-Lock Use 24E
4E Non preferred ER Washer-Lock HRC 45-51 Helical spring
5E Inactive Washer-Lock Use 6E
6E Non preferred ER Washer-Lock-Int ToothSpring Steel Internal tooth
7E Inactive Washer-Lock Use 6E
8E Inactive Washer-Lock Use 6E
9E Inactive Washer-Lock-Int Tooth Use 6E
10E Inactive Washer-Lock Use 12E
11E Non preferred Plain Washer-Felt Felt F-6 grade of automotive felt
12E Non preferred ER Washer-Lock-Ext ToothHRC 40-50 External tooth
13E Inactive Washer-Lock Use 12E
14E Inactive Washer-Lock Use 12E
15E Inactive Washer-Lock Use 12E
16E Inactive Washer-Lock Use 12E
17E Non preferred ER Washer-Lock HRC 45-51 Helical spring, For machine screws
18E Inactive Washer-Lock Use 19E
19E Non preferred ER Washer-Lock HRC 40-50 Countersunk
20E Inactive Washer-Lock Use 19E
21E Non preferred ER Washer-Lock HRC 45-51 Hi-collor helical spring, Smaller sizes
22E Non preferred ER Washer-Lock HRC 45-51 Hi-collor helical spring, Larger sizes
23E Non preferred JR Washer-Lock HRC 45-51 For Govt. contracts only
24E Non preferred ER Washer-Lock HRC 45-51 Extra duty helical spring
25E Non preferred E Washer-Plain SAE 1010 Type A
26E Non preferred ER Washer-Lock HRC 45-53 Double and quad rib helical spring
27E Non preferred ER Washer-Hardened HRC 38-45
Fittings
Prefix Status Plating Noun Material Description
50E Preferred E Union-ORFS Steel Standard and Jump Sizes
51E Preferred E Union-ORFS Bulkhead Steel Without nut
52E Preferred E Connector-Adapter Steel Short, ORFS to O-ring boss
53E Preferred E Connector-Adapter Steel Long, ORFS to O-ring boss
54E Preferred E Elbow-90Adapter Steel ORFS to ORFS
55E Preferred E Elbow-90Adapter Steel ORFS to SAE O-ring boss
56E Preferred E Tee-3 way male Steel ORFS to ORFS to ORFS
57E Preferred E Tee-Branch Steel ORFS to ORFS to O-ring boss
58E Preferred E Tee-Run Steel ORFS to O-ring boss to ORFS
59E Preferred E Tee-Swivel Branch Steel ORFS to ORFS to O-ring boss
60E Preferred E Plug-ORFS Steel Hydraulic Tube Fitting
61E Preferred E Locknut-ORFS Bulkhead Steel Hydraulic Tube Fitting
62E Preferred E Nut-Tube ORFS Steel Hydraulic Tube
63E Preferred E Nut-ORFS Plug Steel Tube Nut Plug Assembly
65E Preferred E Elbow-90 Steel ORFS Braze Port Adapter
66E Preferred E Tee-Branch Steel ORFS Braze Port Adapter
Approved: Revision: A
INCH PREFERRED HARDWARE Page 4 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Fittings (continued)
Prefix Status Plating Noun Material Description
67E Preferred E Sleeve-ORFS Steel Standard Sleeve
69E Preferred E Elbow-45 Steel ORFS to O-ring boss
70E Preferred E Elbow-90Bulkhead Steel ORFS to ORFS
71E Preferred E Tee-Bulkhead Run Steel ORFS to ORFS to ORFS
72E Preferred E Elbow-45Bulkhead Steel ORFS to ORFS
73E Preferred E Cross-ORFS Steel ORFS to ORFS to ORFS to ORFS
74E Preferred E Connector-ORFS Braze Steel ORFS to Female braze
75E Preferred E Tee-Swivel Run Steel ORFS to Swivel nut to ORFS
76E Preferred E Elbow-90Swivel Steel ORFS to Swivel nut
77E Preferred E Elbow-90Long Steel ORFS to O-ring boss
1F Non Preferred J Pin-Cotter Carbon Steel
2F Inactive Pin-Clevis Use 4F
4F Non Preferred ER Pin-Clevis Hardened Steel
10F Non Preferred G Plug-Pipe SAE 1112 Square Projecting
11F Non Preferred G Plug-Pipe SAE 1112 Square Recessed
12F Non Preferred J Plug-Expansion SAE 1008 Oiled
13F Inactive Plug-Pipe Use 16F
14F Inactive Plug-Pipe Use 16F
15F Inactive Plug-Pipe Use 16F
16F Non Preferred E Plug-Hex Socket Pipe Carbon Steel Ref SAE J531 and ANSI B16.14
17F Non Preferred G Tee-Pipe Malleable Iron Ref. ANSI B2.1
18F Non Preferred G Tee-Pipe ASTM A197 Ref. ANSI B16.3
19F Non Preferred G Bushing-Reducing Pipe ASTM A197 Ref. ANSI B16.14
20F Non Preferred G Tee-Reducing Pipe ASTM A197 Ref. ANSI B16.3
21F Non Preferred G Cross-Pipe ASTM A197 Ref. ANSI B16.3
22F Non Preferred G Cap-Pipe ASTM A197 Ref. ANSI B16.3
23F Non Preferred G Elbow-45Pipe ASTM A197 Ref. ANSI B16.3
24F Non Preferred G Elbow-90Pipe ASTM A197 Ref. ANSI B16.3
25F Non Preferred G Elbow-45Pipe ASTM A197 Street
26F Non Preferred G Elbow-90Pipe ASTM A197 Street
27F Non Preferred J Elbow-90Pipe Carbon Steel High Pressure
28F Non Preferred J Tee-Pipe Carbon Steel High Pressure
29F Non Preferred J Elbow-90Pipe Carbon Steel High Pressure
30F Non Preferred J Tee-Male Run Pipe Carbon Steel High Pressure
31F Non Preferred J Union 90Pipe Carbon Steel Male, Ref. SAE J516
32F Non Preferred J Union 90Pipe Carbon Steel Female, Ref. SAE J516
33F Non Preferred J Elbow-45Pipe Carbon Steel Adapter, Ref. SAE J516
34F Inactive Plug-Pipe Use 16F
35F Inactive Plug-Pipe Use 16F
36F Non Preferred J Union-Adapter Pipe Carbon Steel Ref. SAE J516
37F Non Preferred J Union-Adapter Pipe Carbon Steel Ref. SAE J516
38F Non Preferred Plain Connector-45Flare Brass Male Pipe to Male 45Flare
39F Non Preferred Plain Connector-45Flare Brass Female Pipe to Male 45Flare
40F Non Preferred Plain Union-45Flare Brass Male 45Flare
41F Non Preferred Plain Elbow-90Union Brass Male 45Flare
42F Non Preferred Plain Elbow-90 Brass Male 45Flare to Male NPTF
43F Non Preferred Plain Elbow-90Female Brass Female NPTF to Male 45Flare
44F Non Preferred Plain Tee-Union Brass Male 45Flare
Approved: Revision: A
INCH PREFERRED HARDWARE Page 5 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Fittings (continued)
Prefix Status Plating Noun Material Description
45F Non Preferred Plain Tee-Male Run Brass 45Flare to 45Flare to NPTF
46F Non Preferred Plain Tee-Male Branch Brass 45Flare to NPTF to 45Flare
47F Non Preferred Plain Nut-Tube Long Brass 45Flare
48F Non Preferred Plain Nut-Tube Short Brass 45Flare
49F Non Preferred Plain Connector-Male Brass Tapered Sleeve (Compression) Type
50F Non Preferred Plain Union-Male Brass Tapered Sleeve (Compression) Type
51F Non Preferred Plain Elbow-90 Brass Tapered Sleeve (Compression) Type
52F Non Preferred Plain Elbow-90 Brass Tapered Sleeve (Compression) Type
53F Non Preferred Plain Union-90 Brass Tapered Sleeve (Compression) Type
54F Non Preferred Plain Tee-Male Union Brass Tapered Sleeve (Compression) Type
55F Non Preferred Plain Tee-Male Run Brass Tapered Sleeve (Compression) Type
56F Non Preferred Plain Tee-Male Branch Brass Tapered Sleeve (Compression) Type
57F Non Preferred Plain Sleeve-Tube Brass Tapered Sleeve (Compression) Type
58F Non Preferred Plain Nut-Tube Brass Short, Tapered Sleeve Type
59F Non Preferred Plain Connector-Tube Brass Inverted Flare, Male
60F Non Preferred Plain Connector-Tube Brass Inverted Flare, Female
61F Non Preferred Plain Union-Tube Brass Inverted Flare
62F Non Preferred Plain Elbow-90 Brass Inverted Flare, Male
63F Non Preferred Plain Tee-Male Run Brass Inverted Flare, Male
64F Inactive Nut-Tube Use 92F
65F Inactive Valve Check Use 6K
66F Non Preferred Plain Cock-Shutoff Brass Brass Body
67F Non Preferred Plain Cock-Shutoff Brass Brass Body
68F Non Preferred Plain Cock-Shutoff Brass Brass Body
69F Non Preferred Plain Cock-Shutoff Brass Brass Body
70F Non Preferred Plain Cock-Shutoff Brass Brass Body
71F Non Preferred Plain Cock-Drain Brass Brass Body
72F Non Preferred Plain Cock-Drain Brass Brass Body
73F Inactive Cock-Drain Use 72F
74F Non Preferred Plain Cock-Shutoff Brass Brass Body
75F Non Preferred G Coupling-Pipe Wrought Steel Ref. ANSI B16.3
76F Non Preferred G Coupling-Pipe Malleable Iron Reducing coupling
77F Non Preferred E Fitting-Tube Carbon Steel 37Flare
78F Non Preferred E Nut-Tube Long Carbon Steel 37Flare
79F Non Preferred E Sleeve Carbon Steel 37Flare
80F Non Preferred E Nut-Short Tube Carbon Steel 37Flare
81F Non Preferred E Fitting-Pipe Carbon Steel Ref. SAE J514
82F Non Preferred E Fitting-Pipe Carbon Steel Ref. SAE J514
83F Non Preferred E Elbow-Tube Carbon Steel 37Flare
84F Non Preferred E Elbow-Tube Carbon Steel 37Flare
85F Non Preferred E Elbow-Tube Carbon Steel 37Flare
86F Non Preferred E Nut-Bulkhead Tube Carbon Steel 37Flare
87F Non Preferred E Union-Tube Carbon Steel 37Flare
88F Non Preferred E Elbow-Tube Carbon Steel 37Flare
89F Non Preferred E Tee-Tube Carbon Steel 37Flare
90F Non Preferred E Tee-Tube Carbon Steel Ref. SAE J514
Approved: Revision: A
INCH PREFERRED HARDWARE Page 6 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Fittings (continued)
Prefix Status Plating Noun Material Description
91F Non preferred Plain O-Ring Nitrile For straight and tube filling boss
92F Non preferred E Nut-Tube Male Carbon Steel Inverted flare, Ref. SAE J512
93F Non preferred E Connector Carbon Steel 37flare, Ref. SAE J514
94F Inactive Elbow-Tube Use 17K
95F Inactive Elbow-Tube Use 18K
96F Inactive Tee-Tube Use 19K
97F Non preferred J Bushing Pipe Malleable Iron Reducing Pipe Face Bushing
98F Non preferred E Tee-Tube Carbon Steel 37flare, Ref. SAE J514
99F Non preferred E Tee-Tube Carbon Steel 37flare, Ref. SAE J514
Approved: Revision: A
INCH PREFERRED HARDWARE Page 7 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Screws and Weld Studs (continued)
Prefix Status Plating Noun Material Description
41G Non preferred E Screw-Slotted Carbon Steel Coarse, Fillister Head, Smaller Sizes
42G Non preferred E Screw-Slotted Carbon Steel Fine, Fillister Head, Smaller Sizes
43G Non preferred E Screw-Slotted Carbon Steel Coarse, Fillister Head, Larger Sizes
44G Non preferred E Screw-Slotted Carbon Steel Fine, Fillister Head, Larger Sizes
45G Non preferred E Screw-Hex Head Carbon Steel Coarse, Smaller Sizes
46G Non preferred E Screw-Hex Head Carbon Steel Fine, Smaller Sizes
47G Non preferred E Screw-Hex Head Carbon Steel Coarse, Larger Sizes
48G Non preferred E Screw-Hex Head Carbon Steel Fine, Larger Sizes
51G Non preferred J Screw-Wood Steel Cross Recessed, Flat Countersunk
52G Non preferred J Screw-Wood Steel Cross Recessed, Round Head
53G Non preferred Plain Screw-Wood Brass Cross Recessed, Flat Countersunk
54G Non preferred Plain Screw-Wood Brass Cross Recessed, Round Head
55G Non preferred Plain Stud-Weld Carbon Steel Coarse, Smaller Sizes
56G Non preferred Plain Stud-Weld Carbon Steel Coarse, Larger Sizes
57G Non preferred E Screw-Tapping Carbon Steel Cross Recessed, Flat Countersunk
58G Non preferred E Screw-Tapping Carbon Steel Cross Recessed, Pan Head
59G Non preferred E Screw-Tapping Carbon Steel Coarse, Hex Head, Type C
60G Non preferred E Screw-Tapping Carbon Steel Fine, Hex Head, Type C
61G Non preferred E Screw-Tapping Carbon Steel Coarse, Hex Head, Type C
62G Non preferred E Screw-Tapping Carbon Steel Fine, Hex Head, Type C
63G Inactive Screw-Tapping Use 65G
64G Inactive Screw-Tapping Use 66G
65G Non preferred E Screw-Tapping Carbon Steel Coarse, Slotted Pan Head, Type C
66G Non preferred E Screw-Tapping Carbon Steel Fine, Slotted Pan Head, Type C
67G Inactive Screw-Slotted Use 85G
68G Inactive Screw-Slotted Use 86G
75G Non preferred E Screw-Cross Recessed Carbon Steel Coarse, Flat, Smaller Sizes
76G Non preferred E Screw-Cross RecessedCarbon Steel Coarse, Flat, Larger Sizes
77G Non preferred E Screw-Cross RecessedCarbon Steel Fine, Flat, Smaller Sizes
78G Non preferred E Screw-Cross RecessedCarbon Steel Fine, Flat, Larger Sizes
79G Inactive Screw-Cross Recessed Use 87G
80G Inactive Screw-Cross Recessed Use 91G
81G Inactive Screw-Cross Recessed Use 88G
82G Inactive Screw-Cross Recessed Use 92G
83G Non preferred E Bolt-Lag Grade 1 Square Head
84G Non preferred ER Screw-Tapping IFI-112 Hex Washer Head, Thread Rolling
85G Non preferred E Screw-Slotted Carbon Steel Coarse, Pan Head
86G Non preferred E Screw-Slotted Carbon Steel Fine, Pan Head
87G Non preferred E Screw-Cross RecessedCarbon Steel Coarse, Pan Head
88G Non preferred E Screw-Cross RecessedCarbon Steel Fine, Pan Head
89G Non preferred E Screw-Slotted Carbon Steel Coarse, Pan Head
90G Non preferred E Screw-Slotted Carbon Steel Fine, Pan Head
91G Non preferred E Screw-Cross RecessedCarbon Steel Carbon Steel
92G Non preferred E Screw-Cross RecessedCarbon Steel Carbon Steel
95G Non preferred E Screw-Locking Grade 8 Coarse, Flat, Countersunk Head
96G Non preferred E Screw-Locking Grade 8 Fine, Flat, Countersunk Head
97G Non preferred E Screw-Set Alloy Steel Coarse, Hex Head, Oval Point
Approved: Revision: A
INCH PREFERRED HARDWARE Page 8 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Rivets, Clamps, Grease Zerks, etc.
Prefix Status Plating Noun Material Description
1H Non preferred Plain Rivet-Button Head ASTM A31 Solid
2H Non preferred Plain Rivet-Flat Countersunk ASTM A31 Solid
3H Inactive Rivet-Flat Countersunk Use 34H
4H Inactive Clamp-Hose Use 42H
5H Non preferred J Clip-Hose SAE 1010 Open
6H Non preferred J Clip-Hose Carbon Steel Closed
7H Inactive Control-Choke
8H Non preferred E Hose-Assembly SAE 30R3 Grease and Fuel
9H Inactive Control-Throttle
10H Non preferred J Fitting-Zerk Steel Straight
11H Non preferred J Fitting-45-Zerk Steel
12H Non preferred J Fitting 90-Zerk Steel
13H Inactive Gun Grease
14H Non preferred J Fitting 30-Zerk Steel
15H Inactive J Fitting 65-Zerk Steel
16H Inactive J Fitting 105-Zerk Steel
17H Non preferred J Clamp-Hose SAE 1065-1080 SAE Type E
18H Inactive Clamp-Hose Use 42H
19H Non preferred J Clamp-Hose Circle SAE 1010
20H Inactive Clamp-Hose Use 42H
21H Inactive Clamp-Hose Use 42H
23H Non preferred Plain Rivet-Brake Lining Brass Type A
24H Non preferred Plain Locknut-Bearing SAE 1015 Types N and AN
25H Inactive Locknut-Bearing
26H Non preferred Plain Washer-Bearing Lock Carbon Steel Type W
27H Non preferred Plain Washer-Bearing Lock Carbon Steel Type TW
28H Non preferred Plain Wire-Lock SAE 1006 Annealed
29H Inactive Clamp-Cable Use 30H
30H Non preferred J Clamp-Cable SAE 1010 Insulated
31H Non preferred J Clamp-Cable Double SAE 1010 Insulated
32H Inactive Rivet-Round Head Use 35H
33H Inactive Rivet-Brazier Head Use 35H
34H Non preferred Plain Rivet-Brake Lining Brass Type T
35H Non preferred Plain Rivet-Universal Head Aluminum Solid shaft
36H Non preferred J Fitting-Zerk Steel
Straight, Thread Forming
37H Non preferred J Fitting-45Zerk Steel
Thread Forming
38H Non preferred J Fitting-90Zerk Steel
Thread Forming
39H Non preferred J Fitting-30Zerk Steel
Thread Forming
40H Non preferred J Fitting-65Zerk Steel
Thread Forming
41H Inactive Rivet-Brazier Head Use 35H
42H Non preferred Plain Clamp-Hose Worm Stainless Steel SAE Type F
43H Non preferred Plain Clamp-Hose T-bolt Stainless Steel T-Bolt Band
Approved: Revision: A
INCH PREFERRED HARDWARE Page 9 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Clevises, Pins and Keys
Prefix Status Plating Noun Material Description
1J Non preferred Plain Clevis-Rod End Carbon Steel Round Rod
2J Non preferred Plain Clevis-Rod End SAE 1022 Adjustable
3J Inactive Clevis-Rod End Use 1J
4J Inactive Clevis-Rod End Use 2J
5J Non preferred Plain Key-Woodruff Carbon Steel Ref. SAE J502
6J Non preferred Plain Key-Woodruff Alloy Steel Ref. SAE J502
7J Non preferred Plain Key-Square SAE 1018 CDS Ref. ANSI B17.1
8J Non preferred Plain Key-Rectangular SAE 1018 CDS Ref. ANSI B17.1
9J Non preferred Plain Snap Ring SAE 1065 Square Section
10J Non preferred Plain Ball-Steel SAE 1010-1022 AFMBA Grade 500
12J Inactive Plug-Paper
14J Non preferred Plain Pin-Spiral SAE 1070-1095 Standard Duty (Series B)
15J Non preferred J Pin-Groove SAE 1112-1113 Type A
16J Non preferred J Pin-Groove SAE 1112-1113 Type B
17J Non preferred J Pin-Groove SAE 1112-1113 Type E
18J Non preferred J Pin-Groove SAE 1112-1113 Type C
19J Non preferred Plain Clamp-Split Flange Steel Standard Pressure
20J Non preferred Plain Clamp-Split Flange Steel High Pressure
Fittings
Prefix Status Plating Noun Material Description
5K Non preferred G Nipple-Pipe Schedule 80 Extra Strong Pipe
6K Non preferred E Valve-90Check Carbon Steel Adapter Union, Male
7K Non preferred Plain Flange-Pipe Carbon Steel Tapped from Hub Side
8K Non preferred Plain Flange-Pipe Carbon Steel Tapped from Flanged Side
9K Non preferred E Adapter-Tube Carbon Steel 37Flare, Reducing
10K Non preferred E Tee-Tube Carbon Steel 37Flare, Union Tee
11K Non preferred E Elbow-90Tube Carbon Steel 37Flare, Swivel
12K Non preferred E Elbow-45Tube Carbon Steel 37Flare, Swivel
13K Non preferred E Tee-Tube Carbon Steel 37Flare, Swivel Run Tee
14K Non preferred E Tee-Tube Carbon Steel 37Flare, Swivel Branch Tee
15K Non preferred E Connector-Tube Carbon Steel 37Flare, Short Straight Thread
16K Non preferred E Connector-Tube Carbon Steel 37Flare, Long Straight Thread
17K Non preferred E Elbow-90Tube Carbon Steel 37Flare, Straight Thread
18K Non preferred E Elbow-45Tube Carbon Steel 37Flare, Straight Thread
19K Non preferred E Tee-Tube Carbon Steel 37Flare, Straight Thread Branch
20K Inactive Tee-Tube Use 21K
21K Non Preferred E Tee-Tube Carbon Steel 37Flare, Straight Thread Run
22K Inactive Nut-Tube Use 86F
23K Inactive Valve-Check
24K Non Preferred E Plug-Tube Carbon Steel 37Flare, Hex Head O-ring Boss
25K Non Preferred Plain O-Ring SAE 20R1 Commercial Grade
26K Non Preferred Plain Elbow-90Pipe Carbon Steel Elbow
27K Non Preferred Plain Elbow-45Pipe Carbon Steel Elbow
28K Non Preferred Plain Tee-Pipe Carbon Steel Female NPTF
29K Non Preferred Plain Cross-Pipe Carbon Steel Female NPTF
Approved: Revision: A
INCH PREFERRED HARDWARE Page 10 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Fittings (continued)
Prefix Status Plating Noun Material Description
30K Non preferred Plain Elbow-90Pipe Carbon Steel Street Elbow
31K Non preferred Plain Branch-Pipe Carbon Steel Lateral Branch
32K Non preferred Plain Elbow-90Pipe Carbon Steel Socket-Welding Type
33K Non preferred Plain Elbow-45Pipe Carbon Steel Socket-Welding Type
34K Non preferred Plain Tee-Pipe Carbon Steel Socket-Welding Type
35K Non preferred Plain Cross-Pipe Carbon Steel Socket-Welding Type
36K Non preferred Plain Cap-Tube Carbon Steel 37Flared Type
37K Non preferred Plain Coupling-Pipe Carbon Steel Pipe Threaded Type
38K Non preferred Plain O-Ring Ethylene Propylene Commercial Grade
40K Non preferred Plain Plug-Pipe Carbon Steel Hex Head
41K Non preferred Plain Plug-Pipe Carbon Steel Hex Head
42K Non preferred J Tee-Tube Carbon Steel 37Flare, Male Run Tee
43K Non preferred J Cross-Tube Carbon Steel 37Flare
44K Non preferred J Tee-Tube Carbon Steel 37Flare, Female Run
45K Non preferred J Union-Tube Carbon Steel 37Flare, Bulkhead
46K Non Preferred J Elbow-Tube Carbon Steel 37Flare, Bulkhead
47K Non Preferred J Plug-Socket Carbon Steel Hex Socket, O-ring Boss
48K Non Preferred Plain O-Ring Nitrile Navy Std. 6227 and 6230
49K Non Preferred Plain O-Ring Nitrile Navy Std. 6227 and 6230
50K Non Preferred Plain O-Ring Nitrile Mil Std. 28778
51K Non Preferred Plain Flange-Pipe Carbon Steel Welding Pilot Type
52K Non Preferred Plain Nut-Tube Refrigeration Brass Reducing Flare, Long
53K Non Preferred Plain Nut-Tube Refrigeration Brass Reducing Flare, Short
56K Non Preferred Plain O-Ring-Hydraulic Silicone Commercial Grade
57K Non Preferred Plain O-Ring-Hydraulic Silicone For Straight Thread Boss
58K Non Preferred Plain O-Ring-Hydraulic Nitrile High Pressure Commercial Grade
60K Non Preferred Plain O-Ring-Hydraulic Polyacrylate Commercial Grade
61K Non Preferred E Connector-Tube EndCarbon Steel Pipe Adapter Type
62K Non Preferred E Elbow-90Tube EndCarbon Steel Pipe Adapter Type
63K Non Preferred E Tee-Tube End Carbon Steel Pipe Adapter Type Branch
64K Non Preferred E Tee-Tube End Carbon Steel Pipe Adapter Type Run Tee
65K Non Preferred E Connector-Tube EndCarbon Steel 37Flare, Round Spud
66K Non Preferred E Elbow-90Tube EndCarbon Steel 37Flare
67K Non Preferred E Tee-Tube End Carbon Steel 37Flare, Branch
68K Non Preferred E Elbow-Tube End Carbon Steel 37Flare, Side Outlet
69K Non Preferred E Tee-Tube End Carbon Steel 37Flare, Run
70K Non Preferred E Tee-Tube End Carbon Steel Female, Junction Block
71K Non Preferred E Connector-Tube EndCarbon Steel 37Flared Hex Head Spud
72K Non Preferred E Tee-Tube End Carbon Steel 37Flare, (Double) Run
73K Non Preferred Plain Ring-Backup Nitrile Shore A, 90 Durometer
74K Non Preferred J Coupling-Pipe Carbon Steel High Pressure Hex
76K Non Preferred Plain O-Ring-Hydraulic Flourocarbon Shore A, 75 Durometer
77K Non Preferred Plain O-Ring-Hydraulic Flourocarbon Shore A, 90 Durometer
78K Non Preferred Plain O-Ring-Hydraulic Flourocarbon For Straight Thread Boss
79K Non Preferred Plain O-Ring-Hydraulic Flourocarbon For Straight Thread Boss
Approved: Revision: A
INCH PREFERRED HARDWARE Page 11 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.
STANDARD PARTS - Section SP-6 Index
Hoses and Electrical Resistors
Prefix Status Plating Noun Material Description
1M Non preferred Plain Hose-Coolant SAE 20R1 Engine Coolant System
2M Non preferred Plain Tubing-Copper Copper Soft Annealed Temper
1R Non preferred Plain Resistor-1/4 Watt As Required < 100 k Ohms, 20% Resistance
2R Non preferred Plain Resistor-1/4 Watt As Required < 100 k Ohms, 10% Resistance
3R Non preferred Plain Resistor-1/4 Watt As Required < 100 k Ohms, 5% Resistance
4R Non preferred Plain Resistor-1/4 Watt As Required > 100 k Ohms, 20% Resistance
5R Non preferred Plain Resistor-1/4 Watt As Required > 100 k Ohms, 10% Resistance
6R Non preferred Plain Resistor-1/4 Watt As Required > 100 k Ohms, 5% Resistance
7R Non preferred Plain Resistor-1/2 Watt As Required < 100 k Ohms, 20% Resistance
8R Non preferred Plain Resistor-1/2 Watt As Required < 100 k Ohms, 10% Resistance
9R Non preferred Plain Resistor-1/2 Watt As Required < 100 k Ohms, 5% Resistance
10R Non preferred Plain Resistor-1/2 Watt As Required > 100 k Ohms, 20% Resistance
11R Non preferred Plain Resistor-1/2 Watt As Required > 100 k Ohms, 10% Resistance
12R Non preferred Plain Resistor-1/2 Watt As Required > 100 k Ohms, 5% Resistance
13R Non preferred Plain Resistor-1 Watt As Required < 100 k Ohms, 20% Resistance
14R Non preferred Plain Resistor-1 Watt As Required < 100 k Ohms, 10% Resistance
15R Non preferred Plain Resistor-1 Watt As Required < 100 k Ohms, 5% Resistance
16R Non preferred Plain Resistor-1 Watt As Required > 100 k Ohms, 20% Resistance
17R Non preferred Plain Resistor-1 Watt As Required > 100 k Ohms, 10% Resistance
18R Non preferred Plain Resistor-1 Watt As Required > 100 k Ohms, 5% Resistance
19R Non preferred Plain Resistor-2 Watt As Required < 100 k Ohms, 20% Resistance
20R Non preferred Plain Resistor-2 Watt As Required < 100 k Ohms, 10% Resistance
21R Non preferred Plain Resistor-2 Watt As Required < 100 k Ohms, 5% Resistance
22R Non preferred Plain Resistor-2 Watt As Required > 100 k Ohms, 20% Resistance
23R Non preferred Plain Resistor-2 Watt As Required > 100 k Ohms, 10% Resistance
24R Non preferred Plain Resistor-2 Watt As Required > 100 k Ohms, 5% Resistance
26R Non preferred Plain Resistor-1/2 Watt As Required > 100 k Ohms, Evaporated Metal Film
27R Non preferred Plain Resistor-1/2 Watt As Required > 100 k Ohms, Evaporated Metal Film
28R Non preferred Plain Resistor-1/8 Watt As Required Evaporated Metal Film
30R Non preferred Plain Terminals-Eyelet Copper Alloys Electrical, Noninsulated
31R Non preferred Plain Terminals-Eyelet Copper Alloys Electrical, Noninsulated
Approved: Revision: A
INCH PREFERRED HARDWARE Page 12 of 12
Issued: 01 JUL 97
Note: Suppliers shall assume the following responsibilities for materials furnished to CLARK Material Handling Company, its subsidiaries, affiliates and their licenses: 1. Compliance with the latest issue of this standard and/or specification and other documents referenced therein
to the extent specified. 2. Compliance with all applicable government regulations and requirements. 3. Infringement of adversely held domestic or foreign patents and trademarks. 4. Any and all product liability claims.