Sie sind auf Seite 1von 4

UNIT-III

5. a) Explain the switching behavior of MOSFET 6


b) Explain the working of switched-capacitor common mode
feedback 6
OR
6. a) Explain the working of Inverting amplifier in sampling mode
and Amplification Mode along with circuit diagrams 6
b) Explain in detail about Precision Multiply by two circuits 6
UNIT-IV
7. a) Sketch the cross coupled Colpitts Oscillator and explain its
operation 6
b) Write any two application of PLL 6
OR
8. a) What is the main difference normal oscillator and VCO?
Explain in detail about VCO 7
b) Explain about Jitter in PLL and how it can be reduced? 5
UNIT-V
9. a) Explain the working of Flash type ADC, indicate its main
disadvantages and advantages 6
b) Explain about the following terms: 6
i) Monotonicity ii) Resolution iii) Glitch
OR
10. a) Explain the working of R-2R ladder DAC 6
b) Discuss the terms that characterize ADC 6

[12/II S/212]
[April-12]
[EPRVD 201A]
M.Tech. Degree Examination
VLSI Design
II SEMESTER
ANALOG SYSTEM DESIGN
(Effective from the admitted batch 200910)
Time: 3 Hours Max.Marks: 60
--------------------------------------------------------------------------------- -------------------
Instructions: Each Unit carries 12 marks.
Answer all units choosing one question from each unit.
All parts of the unit must be answered in one place only.
Figures in the right hand margin indicate marks allotted.
----------------------------------------------------------------------------------------------------
UNIT-I
1. a) Explain in detail about Thermal Noise and derive its relationship
with absolute temperature 6
b) Explain the terms:
i) Noise Figure ii) Noise Bandwidth iii) Noise Temperature 6
OR
2. a) Explain the noise performance of single stage Common Gate
Amplifier 6
b) Explain the noise aspects related to differential pair 6
UNIT-II
3. a) Explain about given (i) problem of sensitivity (ii) applications
of all pass filter 6
b) Write down the design considerations of Sallen and key
first-order LPF 6
OR
4. a) Explain about open loop comparator. Describe how the
performance of comparator can be improved 6
b) Discuss the features of High speed comparators 6
UNIT-III
5. a) Explain the switching behavior of MOSFET 6
b) Explain the working of switched-capacitor common mode
feedback 6
OR
6. a) Explain the working of Inverting amplifier in sampling mode
and Amplification Mode along with circuit diagrams 6
b) Explain in detail about Precision Multiply by two circuits 6
UNIT-IV
7. a) Sketch the cross coupled Colpitts Oscillator and explain its
operation 6
b) Write any two application of PLL 6
OR
8. a) What is the main difference normal oscillator and VCO?
Explain in detail about VCO 7
b) Explain about Jitter in PLL and how it can be reduced? 5
UNIT-V
9. a) Explain the working of Flash type ADC, indicate its main
disadvantages and advantages 6
b) Explain about the following terms: 6
i) Monotonicity ii) Resolution iii) Glitch
OR
10. a) Explain the working of R-2R ladder DAC 6
b) Discuss the terms that characterize ADC 6

[12/II S/212]
[April-12]
[EPRVD 201A]
M.Tech. Degree Examination
VLSI Design
II SEMESTER
ANALOG SYSTEM DESIGN
(Effective from the admitted batch 200910)
Time: 3 Hours Max.Marks: 60
----------------------------------------------------------------------------------------------------
Instructions: Each Unit carries 12 marks.
Answer all units choosing one question from each unit.
All parts of the unit must be answered in one place only.
Figures in the right hand margin indicate marks allotted.
--------------------------------------------------------------------------------------- -------------
UNIT-I
1. a) Explain in detail about Thermal Noise and derive its relationship
with absolute temperature 6
b) Explain the terms:
i) Noise Figure ii) Noise Bandwidth iii) Noise Temperature 6
OR
2. a) Explain the noise performance of single stage Common Gate
Amplifier 6
b) Explain the noise aspects related to differential pair 6
UNIT-II
3. a) Explain about given (i) problem of sensitivity (ii) applications
of all pass filter 6
b) Write down the design considerations of Sallen and key
first-order LPF 6
OR
4. a) Explain about open loop comparator. Describe how the
performance of comparator can be improved 6
b) Discuss the features of High speed comparators 6

Das könnte Ihnen auch gefallen