Beruflich Dokumente
Kultur Dokumente
0
BJC-5100 .,
PARTS
CATALOG
Canon .
0698 SE 0.55-0
mBJC-5.00.0
BJC-5100 .,
PARTS
CATALOG
Canon .
Application
This manual has been issued by Canon Inc. for qualified
person to learn technical theory, installation, maintenance,
and repair of products. This manual covers all localities
where the products are sold. For this reason, there may be
information in this manual that does not apply to your
locality.
Corrections
This manual could include technical inaccuracies or
typographical errors due to improvements or changes in the
products. When changes occur in applicable products or in
the content of this manual, Canon will release technical
information as the need arises. In the event of major
changes in the contents of this manual over a long or short
period. Canon will issue a new editions of this manual.
Trademarks
The product names and company names described in this
manual are the registered trademarks of the individual
companies.
Copyright
This manual is copyrighted with all rights reserved. Under
the copyright laws, this manual may not be copied,
reproduced or translated into another language, in whole or
in part, without the written consent of Canon Inc.
DTP System
This manual was produced on an Apple Power Macintosh
7600/120 personal computer and Canon LBP-2030PS laser
beam printer, final pages were printed on Valityper 4300J.
A Canon mo-5001S Magneto-optical Storage Subsystem
with mo-502M Magneto-Optical Storage Disk Cartridge
and mo-IF2 Machitosh interface kit were used for storing
large volumes of page layout, graphic and parts list data for
this manual.
Parts layout illustrations and Logotypes were created using
MACROMEDIA FreeHand 7J.
Pattern drawing were scaned by EPSON GT-8000 scanner
with Adobe photoshop.
Documents and page layouts were created using
QuarkXpress 3.3J.
Parts lists were created using Helix Tecnologies Herix
Xpress and converted to EPS files.
I. CONTENTS
A. ILLUSTRATION INDEX
B. PARTS LAYOUT & PARTS LIST
C. SCREWS & WASHERS LIST
D. TOOL
E. NUMERICAL INDEX
I
ABOUT THIS MANUAL
II.
A. ILLUSTRATION INDEX
For illustration index, the parts layout c) RANK
illustrations in this parts catalog are The service parts with N in the RANK
listed in abbreviated form in order of column are order parts.
illustration number to identify the pages
they appear on. To find an illustration of d) QTY
a part, see the ILLUSTRATION INDEX. The QTY column gives the number of
parts in the corresponding components
layout illustration.
B. PARTS LAYOUT & PARTS LIST
Parts layout illustration e) DESCRIPTION
a) Parts search The DESCRIPTION column gives the
Find a part from the parts layout part names in English.
illustration and find its key number To order a part, indicate the part
from the parts list to identify the part name, too.
number and name. For screws, nuts,
washers, lock washers, pins, spacers,
see SCREWS &WASHERS LIST. C. SCREWS & WASHERS LIST
Note: If parts have the same or similar This is a list of screws, nuts, washers,
shape but different specifications, lock washers, pins, and spacers.
their key number is assigned to The QTY column does not give the
several part numbers and names number of parts used.
in the parts list.
D. TOOL LIST
b) Parts replacement procedure This is a list of tools used for servicing
To replace parts, the parts layout products.
illustrations have figure numbers
according to the disassembly procedure
of the product. The parts that require E. NUMERICAL INDEX
careful work are shown the illustration. All the parts listed in this parts catalog
are arranged in order of part number.
Parts list You can identify part locations and
a) FIGURE & KEY No. names from the NUMERICAL INDEX.
The FIGURE & KEY No. column
corresponds to the key numbers
assigned to the parts in the parts
layout illustration.
It also corresponds to the part locations
printed on the PC board.
b) PART NUMBER
The PART NUMBER column gives the
part numbers corresponding to the key
numbers. To order a part, indicate the
part number clearly.
Note: Parts marked NPN are not
service parts.
II
III
IV
ILLUSTRATION INDEX
A.
TRAY & AC ADAPTER See Page COVER See Page
FIGURE 1 B-1
FIGURE 2 B-3
12 2
9
10
6
11
1
5 3
3
8 2
Unlatch two claws on the left and the front claw
on the right first. Then, press the part shown by
the arrow to remove Key No. 7.
SHEET FEEDER UNIT See Page LOGIC BOARD & BOTTOM CASE See Page
FIGURE 3 B-5
FIGURE 4 B-7
S3 3
2 S3
S1
S1 2
S2
A-1
WASTE INK ABSORBER See Page CARRIAGE UNIT See Page
FIGURE 5 B-9
FIGURE 6 B - 11
1
1
2
S1 5
3
MOTORS See Page PURGE UNIT & STAY UNIT See Page
FIGURE 7 FIGURE 8
B - 13 B - 15
S1
3 4
S1
S3
S1
5
S1
1
1 S1
A
2
Remove Key No. 5 by sliding A in
the direction shown by the arrow.
A-2
SPUR & WIPER UNIT See Page PLATEN UNIT See Page
FIGURE 9 FIGURE 10
B - 17 B - 19
S4
7
S4
If these screws are
loosened, the head
gap adjustment will be
required.
3
5
4
5
3
2 4
Q10 R16
R132 Q9 Q8 R134 R100
18
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
1
R133
R118
TP4
R33
C70
J5
R131 R60 C49
D3
D4
D5
D6
TP56
R114 R63
R32 FB52
FB55 R79 R120
R66
R81 R137 R115 R20
8 1 R140 FB51
FB54 R7 C68
R149 R159
R157 R110
J4 R148 R62
R21 R141 R136 R108
R65
Q15
U14
C61
R142 R152
U15
R57
R103 R92
C36
R56 R55
R105
C15
R58
PS3
Q26 Q24
U11
R97
Q3
C11
Q17
Q13
1
J3
Q19
R119
R113
Q2
R38
LED1
C37
R116
R125
R124
R42
U9
R121
TP57
R117
R95
R126
LED2
R94 R111
FNCK
TP58
R109
LED3 R107
157
208
R61
C39
C85
R74
FB56 FB53
R77 R150 R158
R70 R31 R78 R75
Q11
R23 R27
TP6
R82 R80
U3
R76
INDX
R127 R128
C52
C53
C51
C54
TP7
C86 R38
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
C5 C40 TH1
R43
105
52
R5
C4
C16
C56
C55
104
U10
53
U6
TP12
TP2
TP27
R8
TP3
QH1-9002-01
TP18
SCE -4 T
TP21
TP20
TP30
TP10
TP19
QG8-8002
C19 R59
X1 C28
C20
C6
DAY
POWER
R12
R9
R17
C21
C9
C44
TP5
Q6
R1
S1
FB1 C27
TP8
TP9
FB61 R13
R10
FB62
C83
C24
C23
R14
R15
98 M 1 2 3 4 5 6 7 8 9 XYZ
C22
C25
TP31
FB3
TP11
C42
C18
C26
R
C43
BZ1
R11
C77
C76
FB7 C17
C8 FB8 FB22 R45 C64
B
F1
B
FB9 FB21
FB10 FB20
Q22
Q23
FB11 FB19
C45 R64 FB12 FB18
TP15
TP14
FB15
R49 C65
R25 FB58
S2
FB60 C12
1
FB4 R48
2
U5
2
R54
C87
FB23 FB31
1 FB24 FB30
TP13
TP16
D7
R4
FB25 FB29
C79 R44 C63
FB26
TP25
TP26
TP22
TP23
FB27 C80
FB28
D8
ZD3 C48
R160
R166
R169
R172
R167
R190
R171
R174
R173
R163
R164
R162
R165
R161
R168
R85
R84
TP34
D9
R88
R6
R72
D2
C84
R175
R176
R177
R178
R179
R180
R181
R182
R183
R185
R184
R186
R187
R188
D11
C72
C74
C75
C73
Q7
PS1
J6
J7
R89
D10
Q4
VH
VM
VCC
GND
GND
GND
GND
TP32
D12
R83
FB41
31
R170
FB32
FB50
FB49
FB48
FB46
FB47
FB45
FB44
FB33
FB37
FB36
FB38
FB39
FB42
FB43
FB40
PS2
J1
31
32
J2
1 3 1 4
R86
R87
A-3
TOOL See Page
FIGURE 13 D-1
T1
8
03
9-0 m
QY 1.9m
T2
T3
A-4
PARTS LAYOUT & PARTS LIST
B.
TRAY & AC ADAPTER
FIGURE 1
12
9
10
11
1
5
3
8 2
B-1
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
B-2
FIGURE 2 OVER I
----------------------------------------------------------------,
*
,
4
I
I
8
I
: ,
I
I
I
:
8
1
I :
I
,
,
,
I :
I
,
I I
I
8 9
I
I
I
6
:
I
I
: I
L
I
I
.
8
8 I
: I
,
I
:
8
I ,
I
.
I ,
I ,
I
*
I 1
I
: ------------------------------------------------------------------------------------------------------------.
B-3
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
.
B-4
SHEET FEEDER UNIT
FIGURE 3
S1
B-5
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
S3 3
S3
S1
S2
B-7
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO., Y
K
49 1 QHZ-9002-000 1 CABLE, POWER SUPPLY FOR USA/CANADA
QH2-9003-000 1 CABLE, POWERSUPPLY FOR OTHER
2 QG8-8002-020 1 LOGIC BOARD ASSY FOR BJC-5000
QG8-801 I-000 1 LOGIC BOARD ASSY FOR BJC-5100
3 QA8-0025-000 1 ARM, COVER SENSOR
4 QA8-0077-000 2 CLAMP, CABLE
5 QG8-0001-000 1 BOTTOM CASE UNIT FOR BJC-5000
QG8-0023-000 1 BOTTOM CASE UNIT FOR BJC-5100
B-8
WASTE INK ABSORBER
FIGURE 5
B-9
R
FIGURE . Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
5- 1 QA8-0007-000 1 ABSORBER, INK FOR BJC-5000
QA8-0007-010 I ABSORBER, INK FOR BJC-5100
2 QA8-0079-000 I ABSORBER, SUB INK
B-IO
CARRIAGE UNIT
FIGURE 6
I
-------------------------------------------,
I
r___________________---------------------------------------------------
B-l 1
\
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
6- 1 QBI-2415-000 1 CLIP,SHAFT
l-1 QA8-0125-000 1 CLIP, SHAFT(L) FOR BJC-5100
QBI -2415-000 1 CLIP, SHAFT FOR BJC-5000
2 QA8-0019-000 N 1 SHAFT, CARRIAGE FOR BJC-5000
QA8-0126-000 N 1 SHAFT, CARRIAGE FOR BJC-5100
3 QA8-0018-000 1 HOLDER, CABLE
4 QG8-0008-000 1 CARRIAGE UNIT FOR BJC-5000
QG8-9002-000 1 CARRIAGE UNIT FOR BJC-5100
5 QF8-0003-000 1 IDLER PULLEY ASSY
6 QA8-0123-000 I SPACER, PLASTIC FOR BJC-5100
7 QA8-0048-000 I HOLDER, BELT
8 QA8-0046-000 1 BELT, CARRIAGE
._
B-12
2
\ /=
BJC-5000
BJC-5100
B-l 3
R
FIGURE Q
& PARTNUMBER fi T DESCRIPTION REMARKS
KEY NO. Y
K
B-14
PURGE UNIT & STAY UNIT
FIGURE 8
3 4
S1
S3
S1
2
Remove Key No. 5 by sliding A in
the direction shown by the arrow.
B-15
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
b 1 QG8-001 l-000 1 PURGE UNIT FOR BJC-5000
. QG8-001 I-010 1 PURGE UNIT FOR BJC-5100
2 QH2-9001-000 1 PG SENSOR CABLE ASSY
3 QS5-2045-000 1 SPRING, HOOK END COIL
4 QA8-0088-000 1 LEVER, SENSOR
5 QG8-0005-000 1 STAY UNIT FOR BJC-5000
QG8-9001-000 1 STAY UNIT FOR BJC-5100
.
B-16
SPUR & WIPER UNIT
FIGURE 9
3
5
4
5
3
B-17
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
B-18
PLATEN UNIT
FIGURE 10
S4
7
S4
If these screws are
loosened, the head
gap adjustment will be
required.
B-19
R
FIGURE Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
IO- 1 QA8-8001-000 1 GEAR, SLOW DOWN
2 QG8-001 o-000 1 PLATEN UNIT FOR BJC-5000
QG8-0022-000 1 PLATEN UNIT FOR BJC-5100
3 . QS5-0040-000 1 GEAR, TRANSMISSION
4 QS5-2046-000 2 SPRING, HOOK END COIL *
B-20
PICK-UP ROLLER
FIGURE 11
B-21
R
FIGURE Q
A
& PART NUMBER T DESCRIPTION REMARKS
N
KEY NO. Y
K
11 - 1 QG5-0828-020 1 PICK-UP ROLLER UNIT
B-22
D18 D17 D16 D15 D14 D13
S2
RESET 0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
1
1 Q23 S1
19
PS3
8
POWER
31 E B
32
1
J4
J7 2 U2
J1
C62
FIGURE 12
3
D3
U12 1 U11
1
C71
C77 52
31 J6 1
Q22
D4
1
X1
E B 53 208
ZD1
2 D5
32
4
J2
B-23
D12 D10 D11 D9 D8 D7 QH1-9002-01
J3 D6
Top View
QG8-8002 1 4
ZD2
C76
R
J5
U5
SCE -4 T 157
104
F2
PS2
PS1
U9
F1
105 156
BZ1
Q14
C46 R98
R40 R122
R39
R101
R104
R112 TP33
Q10 R16
R132 Q9 Q8 R134 R100
R133
R118
TP4
R33
C70
R131 R60 C49
TP56
R114 R63
R32 FB52
FB55 R79 R120
R66
R81 R137 R115 R20
R140 FB51
FB54 R7 C68
R149 R159
R157 R110
R148 R62
R21 R141 R136 R108
R65
Q15
U14
C61
Q18
R142 R152
U15
R139 R138 R52 C14
R24
R41
Q27 Q25 R99
R123 R93
R57
R103 R92
C36
R56 R55
R105
C15
R58
R29 R26 C10
R53
R102
Q26 Q24
R97
Q3
C11
Q17
Q13 Q19
R119
R113
Q2
R38
LED1
C37
R116
R125
R124
R42
R121
TP57
R117
R95
R126
LED2
R94 R111
TP58
R109
LED3 R107
R61
C39
C85
R69 R144 R153
R68 R147 R156
R28
R191 R143 R151
R74
FB56 FB53
R77 R150 R158
R70 R31 R78 R75
Q11
R23 R27
TP6
R82 R80
U3
R22 R73 R129
R130
R76 R37 R35
R30 R71
R36 R34
C78 C7
R127 R128
C52
C53
C51
C54
TP7
C86 R38
0 1 2 3 4 5 6 7 8 9
0 1 2 3 4 5 6 7 8 9
C5 C40 TH1
R43
R5
C4
C16
C56
C55
U10
U6
TP12
TP2
TP27
R8
TP3
TP18
TP21
TP20
TP30
TP10
TP19
C19 R59
C28
C20
C6
R12
R9
R17
C21
C9
C44
TP5
Q6
R1 C27
FB1
TP8
TP9
FB61 R13
R10
FB62
C83
C24
C23
R14
R15
98 M 1 2 3 4 5 6 7 8 9 XYZ
C22
C25
TP31
FB3
TP11
C42
C18
C26
C43
R11
A
FB7 C17
C8 FB8 FB22 R45 C64
FB9 FB21
FB10 FB20
FB11 FB19
C45 R64 FB12 FB18
TP15
TP14
FB15
FB23 FB31
FB24 FB30
TP13
TP16
R4
FB25 FB29
C79 R44 C63
FB26
TP25
TP26
TP22
TP23
FB27 C80
FB28
C13 C47 C81
C82
ZD3 C48
R160
R166
R169
R173
R172
R167
R190
R171
R174
R163
R164
R162
R165
R161
R168
R84
R85
TP34
R88
R6
R72
D2
C84
R175
R176
R177
R178
R179
R180
R181
R182
R183
R185
R184
R186
R187
R188
C72
C74
C75
C73
Q7
R89
Q4
VH
VM
VCC
GND
GND
GND
GND
TP32
R83
FB41
R170
FB40
FB32
FB50
FB49
FB48
FB46
FB47
FB45
FB44
FB33
FB37
FB36
FB38
FB39
FB42
FB43
Bottom View
B-24
FIGURE R Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
B-25
This page intentionally left blank
B-26
SCREW
FIGURE R Q
& PARTNUMBER ; T DESCRIPTION REMARKS
KEY NO. Y
K
s- 1 XB6-7300-607 SCREW, TP: M3 x 6 MM
2 XBI -2301-207 SCREW, M3x12
3 XB4-7401-009 SCREW,TAP BINDING HEAD M4xlO
4 XA9-0693-000 SCREW, TP, M3x4
5 XB6-7300-807 SCREW, MACHINE, WASHER HEAD, M3x8
C-l
This page intentionally left blank
C-2
TOOL
D.
TOOL
FIGURE 13
T1
38
9 -00 m
QY 1.9m
T2
T3
D-1
R
FIGURE Q
A
& PART NUMBER T DESCRIPTION REMARKS
N
KEY NO. Y
K
T- 1 CK-0562-000 1 GREASE, MOLYKOTE PG-641
2 QY9-0038-000 1 GUAGE, GAP: 1.9MM
3 QY9-0039-000 1 SPRING, TENSION
D-2
PART FIGURE & DESCRIPTION PART FIGURE &
DESCRIPTION
NUMBER KEY NO. NUMBER KEY NO.
CK-0562-000 T- 1 GREASE, MOLYKOTE PG-641 QG8-801 l-000 4- 2 LOGIC BOARD ASSY
QA8-0001-000 2- 2 COVER, CONNECTOR Q$8-9001-000 8- 5 STAY UNIT
QA8-0004-000 2- 9 LABEL QG8-9002-000 6- 4 CARRIAGE UNIT
QA8-0007-000 5- 1 ABSORBER, INK QG8-9003-000 3- 2 SHEET FEEDER UNIT
QA8-0007-010 5- 1 ABSORBER, INK QH2-9001-000 8- 2 PG SENSOR CAB& ASSY
QA8-0013-000 2- 6 GUIDE, INDICATOR QH2-9002-000 4- 1 CABLE, POWER SUPPLY
QA8-0014-000 2- 3 BUTTON, PUSH QH2-9003-000 4- 1 CABLE, POWER SUPPLY
QA8-0015000 2- 4 BAR, BUTTON QH3-9001-000 1- 3 AC ADAPTER: 120V 60HZ
QA8-0017-000 2- 8 PLATE, PRODUCT NAME QH3-9002-000. 1- 3 AC ADAPTER: 120V 60HZ
QA8-0018-000 6- 3 HOLDER, CABLE QH3-9004-000 1- 4 AC ADAPTER: 220-240V 50HZ
QA8-0019-000 6- 2 SHAFT, CARRIAGE QH3-9006-000 1- 3 AC ADAPTER: 1OOV 50160HZ
QA8-0020-000 10 - 7 FRAME, CARRIAGE GUIDE QH4-9001-000 7- 2 MOTOR, CARRIAGE
QA8-0022-000 10 - 6 HOLDER, SHAm QH4-9003-000 7- 1 MOTOR, PAPER FEED
QA8-0025-000 4- 3 ARM, COVER SENSOR QH4-9007-000 7- 2 MOTOR, CARRIAGE
QA8-0046-000 6- 8 BELT, CARRIAGE QH7-8061-000 12- LED 2 LED: AY 1102W-331 YELLOW
QA8-0048-000 6- 7 HOLDER, BELT 12- LED 3
QA8-0066-000 1- 2 GUIDE, PAPER QH8-9002-000 12- u12 IC, MPU & PRINTER CONTROLLER
QA8-0067-000 2- 5 CAP, INDICATOR QH8-9004-030 12- u2 IC, UPD23C8000XCZ-196, MASKED-ROM
QA8-0068-000 9- 3 SPUR QH8-9009-600 12- u2 IC, UPD23C8OOOXCZ-220, MASKED-ROM
QA8-0073-000 2- 10 LABEL, INK TANK REPLACE QS5-0040-000 10 - 3 GEAR, TRANSMISSION
QA8-0077-000 4- 4 CLAMP, CABLE QS5-2045-000 8- 3 SPRING, HOOK END COIL
QA&0079-000 5- 2 ABSORBER, SUB INK QS5-2046-000 10 - 4 - SPRING, HOOK END COIL
QA8-0085-000 2- 2 COVER, CONNECTOR QY9-0038-000 T- 2 GUAGE, GAP: 1.9MM
QA8-0088-000 8- 4 LEVER, SENSOR QY9-0039-000 T- 3 SPRING, TENSION
QA8-0118-000 2- 8 PLATE, MODEL NAME WA3-6255-000 12- Ull IC, UPD424260LE-70, DRAM
QA8-0123-000 16- 6 SPACER, PLASTIC WA3-6298-000 12 - U 3 IC, HD74HC4053FP, C-MOS
QA8-0125-000 6- 1- 1 CLIP, SHAFT(L) WA3-6426-000 12- U6 IC, PST592EMT
QA8-0126-000 6- 2 SHAFT, CARRIAGE WA3-8448-000 12- UlO IC, AT93C46R-lOSC, EEP-ROM
QA8-8001-000 10 - 1 GEAR, SLOW DOWN WA4-5086-000 12 - U 14 IC, HA17324FEL, OP AMP
QA8-8513-000 9- 4 SHAFT, SPRING 12- u15
QA8-8514-000 9- 1 SPRING, HOOK END COIL WA4-6376-000 12 - U 14 IC, BA10324AF, OPE AMP
QA8-9013-000 2- 3 BUTTON, PUSH 12- u15
QBl-0841-000 9- 5 SPUR WA4-6641-000 12 - U 5 IC, L6219DS, DRIVER
QBl-2406-020 10 - 5 HOLDER, SHAFT 12- u9
QBl-2415-000 6- 1 CLIP, SHAFT WA4-7049-000 12 - U 5 IC, MTD2007F, MOTOR DRIVER
6- l-l 12- u9
QBl-2441-000 7- 3 DAMPER WA7-0253-000 12 - U 11 IC, MSM51426OC-70, DRAM
QBl-2442-000 7- 4 SLEEVE, SCREW WA9-5319-000 12 - U 2 SOCKET, IC, 42P
QBl-2494-000 3- 1 HOLDER, SHEET FEEDER WC2-5329400 12 - S 1 SWITCH, PUSH: KSH0636AT
QF8-0001-000 2- 1 FRONT COVER ASSY 12- s2
QF8-0001-010 2- 1 FRONT COVER ASSY WD1-0274-000 12 - F 1 FUSE, 50V 1A
QF8-0002-000 2- 7 UPPER COVER ASSY 12- F2
QF8-0003-000 6- 5 IDLER PULLEY ASSY WDl-0275-000 12 - F 1 IC, PROTECT OR: ICP-N38
QF8-0015-000 2- 7 UPPER COVER ASSY WGl-5239-000 12 - LED 1 LED: SEC2552C GREEN
QG5-0828-020 11 - 1 PICK-UP ROLLER UNIT WG8-5255-000 12 - PS 2 IC, TLP832, PHOTO INTERRUPTER
QG8-0001-000 4- 5 BOTTOM CASE UNIT 12- PS3
QG8-0002-000 1- 1 OUTPUT TRAY UNIT WG&5357-000 12 - PS 1 IC, EE-SX1128, PHOTO INTERRUPTER
QG8-0005000 8- 5 STAY UNIT WK2-5628-000 12 - X 1 OSCILLATOR, CERAMIC: 25.OMHZ
QG8-0007-000 9- 2 WIPER UNIT WP2-5080-000 12 - TH 1 THERMISTOR: NTCCM20124AG473HC
QG8-0008-000 6- 4 CARRIAGE UNIT WRl-5057-000 12 - BZ 1 BEEPER: PKM13EPY-4000-TFOl
QG8-0010-000 lo- 2 PLATEN UNIT M-3-5060-000 1- 7 CORD, POWER
QG8-001 l-000 8- 1 PURGE UNIT Wr3-5061-000 1- 6 CORD, POWER
QG8-0011-010 8- 1 PURGE UNIT wT3-5069400 1- 5 CORD, POWER
QG8-0015-000 3- 2 SHEET FEEDER UNIT m3-5084-000 1- 8 CORD, POWER
QG8-0022-000 10 - 2 PLATEN UNIT XA9-0693600 S- 4 SCREW, TP, M3x4
QG8-0023-000 4- 5 BOTTOM CASE UNIT XBl-2301-207 S- 2 SCREW, M3x12
QG8-0027400 7- 1 FEED MOTOR UNIT xB4-7401-009 s - 3 SCREW,TAP BINDING HEAD M4xlO
QG8-8002-020 4- 2 LOGIC BOARD ASSY XB6-7300-607 S- 1 SCREW, TP: M3 x 6 MM
E-l
PART FIGURE &
.DESCRIPTION
NUMBER KEY NO.
X86-7300-807 S- 5 SCREW, MACHINE, WASHER HEAD, M3x8
E-2
The printing paper contains
70% waste paper.