Beruflich Dokumente
Kultur Dokumente
Fitting
adjustment
Friction
The home button at top right takes you to the Roadroid server with the built in browser. From here
you can view available app updates, manuals, surveys, maps etc.
Fitting adjustment
Before surveying you must make a Fitting adjustment. Make sure vehicle is on flat ground and adjust
the device according to screen instructions. When yellow rectangle button turn green you have a
valid adjustment. Next carefully press the button and you will return to the main screen.
Temporary guide for BETA-testing of the app, February 2016
Friction survey
Press the Friction survey (the left/right arrow button) on main screen. It is advisable that you have
used another brake type friction equipment before using this app.
1. Speed up to at least 50 km/h. Current speed is shown at left. It is not possible to start a
survey below 50 km/h.
2. When speed is above 50 km/h the big button change to green and you can start a survey.
3. Press the now green record button. Maintain speed and do not slow down before braking.
4. Brake as hard as possible for at least 3-4 seconds or until the vehicle stop fully.
5. Let go of brake pedal (do not slow down after braking, maintain the speed if still moving).
6. Press the record button to stop recording (when recording the button is red).
7. The result is given as an estimated .
8. A GPS-photo will be captured of the survey spot, so make sure phone is mounted so the lens
capture the road. Photo function can be enabled/disabled in settings.
9. Transfer the survey with the upload button. Only when upload button is green it is possible
to make upload. When upload button is yellow it is not possible to use. You cannot start a
new survey before an upload is made. Photos is uploaded separately via Manage uploads.
10. When upload button is pressed you can choose to send/save the survey or delete it.
The brake friction survey is designed to get a quick and simple result on winter roads, with snow/ice
conditions. Many factors affect the result as with other brake friction tests. Expect 7-8 successful
results of 10 trails. The sensitivity is possible to adjust under settings (hamburger button) and it
should be adjusted to a known friction reference.
Start/Stop
recoding
button
Upload
Data is sent the server and shown instantly on the public map as icons in four levels:
Temporary guide for BETA-testing of the app, February 2016
Friction surveys are stored as a Road Event, so you need a Road Event Manager access to view the
result with the photo and also to generate a report/list of several surveys for a period.
The top bar shows if GPS is connected, time, free memory on unit, vertical angle of phone, heading in
degrees, eIRI, cIRI, Speed and Distance surveyed.
If you press photo/video icon button, technical data about the camera is shownshow. The info
button shows current survey info. The bar with colored squares indicated roughness levels.
Press the round green record button to start a survey and press same button (red while recording) to
end the survey. You can enter an optional comment or road id when starting survey and decide if you
want to save the survey when stopping.
Set auto photo capture section length in settings. Photos can be captured by length or time interval -
or not at all. Phots are also taken while touching the colored square bar.
Start/Stop
recoding
button
Temporary guide for BETA-testing of the app, February 2016
Settings
Setting cannot be reached while surveying. It has the following options:
View accelerometer
Will show the X, Y and Z values from the accelerometer. The number of samples per second and the
gravity sensitivity in G. Some phones have problem showing these graphs. We work on a fix here.
Temporary guide for BETA-testing of the app, February 2016
Manage uploads
If something goes wrong you can restart by pressing the Upload data/media files button again. As a
beta-tester please have some patience, stable file transfers is something we work on.
If you change screen in the app, transfer of files is cancelled after the last visible file is uploaded. If
you put app in background mode with upload screen active - transfers continues until finished.