Beruflich Dokumente
Kultur Dokumente
(http://www.ccboot.com/)
I. PXE Boot Windows Technology Background
PXE boot Windows can help a network administrator reducing the daily workload. As an
administrator responsible for a network of dozens of computers or more, it may take you much time
to for troubleshoot and even sometimes you need to do a clean install of the operating system.
That's a lot of work, especially if you have to do it several times a week. Fortunately, PXE boot
Windows solution can help you out of such annoyance. CCBoot supportsinstall windows 7 via pxe
boot.
boot windows xp?PXE is short for Preboot eXecution Environment or Pre-Execution Environment. It
allows computers to boot over network even without harddisk. You can create a Windows operating
system image in order for PXE boot Windows XP, 2003, Vista, indows 7 and 2008. All computers in the
network can boot up from only one image so that it's much more easily and e ciently for the daily
maintaining. Just need to operate the image one time while all computers using this image will get
changed.
Nutshell, the PXE boot server is a DHCP and TFTP server. After you have set the client rstly boot
from network in BIOS, it will get an IP address from the PXE DHCP. Then the PXE server will push NBP
(Network Bootstrap Program) and operating system image stored in the server to client by TFTP so
When using PXE boot Windows solution, the boot process will be changed from the normal order
to:Power on -> BIOS -> PXE stack built-in the NIC (Network Information Center)-> NBP (Network Boot
Program) downloading from server to client's RAM by TFTP-> NBP's responsibility to perform the next
step (a.k.a. 2nd stage boot).
Download PXE boot Windows software - CCBoot server installation package from -
http://www.ccboot.com/download.htm (http://www.ccboot.com/download.htm).
Launch ccbootsetup.exe on the CCBoot server and keep press the next button to the end.
Figure 1
CCBoot will use the following ports - 67 (DHCP), 69 (TFTP), 3260 (iSCSI), 1000 (Image Upload), 8001
(Service Control). You need to open these ports in the rewall of the PXE boot Windows server.
Since CCBoot v2.1, you also need to open port 66. V2.1 uses port 66 as DHCP backup.
Note: Please shut down the other DHCP services on the LAN especially the DHCP service in the
router.
http://www.ccboot.com/pxe-boot-windows.htm 2/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Launch CCBoot and you will get the main interface as bellow:
Figure 2
Demo Environment
Launch the PXE boot Windows software - CCBoot, menu "Options" -> "Options Wizard" and
http://www.ccboot.com/pxe-boot-windows.htm 3/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 3
You need to select the correct local IP address as "DHCP Server IP". Press "Scan DHCP" to check if
there are other DHCP services on the LAN. You need to stop other DHCP services on the LAN.
Figure 4
http://www.ccboot.com/pxe-boot-windows.htm 4/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Set "Server IP Address". Normally, its the same as "DHCP Server IP".
Set "Write-back File Path" and "Image Save Path" as you want.
"Write-back File Path" is used to store the clients' write-back data. You'd better use a big volume
hard disk as "Write-back File Path". This disk should be formatted as NTFS and 64K bytes per
cluster.
"Image Save Path" is used to store the boot images. This disk should be also formatted as NTFS
and 64K bytes per cluster. Youd better use a fast speed hard disk as "Image Save Path". For
Figure 5
http://www.ccboot.com/pxe-boot-windows.htm 5/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 6
Keep default values in "Other Settings". Press the "Finish" button and con rm the popup dialog
box.
To diskless boot Windows XP from the PXE boot server built by CBoot, we rst of all need to create
2. Delete all partitions rst. Allocate a small MBR partition about 40G size and leave the rest
unallocated. Format the 40G partition with NTFS. Install Windows XP and the latest SP into
this partition.
3. After complete Windows installation, open the local area connection network properties and
con gure as bellow:
http://www.ccboot.com/pxe-boot-windows.htm 6/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 7
Click "Properties".
Figure 8
http://www.ccboot.com/pxe-boot-windows.htm 7/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 9
Select "Obtain an IP address automatically" and "Obtain DNS server address automatically",
then click "OK" to save.
4. On the CCBoot server you will nd a client in the client list (Figure 10) that was added by
CCBoot automatically when the client PC got IP address from the CCBoot DHCP service.
http://www.ccboot.com/pxe-boot-windows.htm 8/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 10
5. Double click the client to edit and check both "Enable Upload Image" and "Keep Write-back
File" (Figure 11), when press "save" button it will ask you "Are you sure to delete write-back
le?" Just press "No".
http://www.ccboot.com/pxe-boot-windows.htm 9/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 11
ccbootsetupclient.exe and keep press the next button to the end. Then launch CCBoot client
and you will see the main interface as bellow (Figure 12).
Figure 12
http://www.ccboot.com/pxe-boot-windows.htm 10/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
7. Press the "Install CCBoot Client" button. After nished, it will require reboot system. Reboot
as you want in the "Image File Name". Press the "Upload Image" button to upload the image
to the CCBoot server. Then CCBoot will create an image in the server "Image Save Path".
Note: CCBoot supports two types image le format. It supports VMDK if you are using
Windows 2003 as CCBoot server system. It will support both VMDK and VHD if you are using
Windows 7 or Windows 2008. As you can see in Figure 12, the le format depends on what
you have set for "Image File Name". For example, "XP01.vmdk" and "XP01.vhd".
some similar settings) in BIOS settings so that it will start network boot to PXE boot Windows
XP.(Figure 13).
Figure 13
3. The rst time PXE booting Windows XP on the master PC, you can modify its computer name
(Figure 14).
http://www.ccboot.com/pxe-boot-windows.htm 11/13
8/8/2017 PXE Boot Windows XP, Windows7 and Vista with CCBoot - A PXE Boot Windows Software
Figure 14
Set the computer name as you wish then press enter key to boot it (Figure 15).
Figure 15
4. On CCBoot server, "Options" -> "Settings" -> "Default Client Settings" -> "Disk Group" -> press
the ">>" button, select "XP01.vmdk" as the default boot image in "System Image Selection"
section.
5. Do the same as Step 2 and Step 3 for other client PCs with the same speci cations as the
master PC to PXE boot Windows XP for them. (More information: diskless software windows
xp)
(http://www.ccboot.com/lan-boot.htm)
http://www.ccboot.com/pxe-boot-windows.htm 13/13