Beruflich Dokumente
Kultur Dokumente
M
G
Microgrid
control system
The Copper Clad Steel Grounding Conductor is made up of steel with the coating of 99.99% pure copper. These
conductors/ wires
or strands are equipped with the strength of steel with the conductivity and copper with the better corrosion
resistance property. The concentric copper cladding is metallurgic ally bonded to a steel core through a continuous,
solid cladding process using pressure rolling for primary bonding. The copper cladding
thickness remains constant surrounding steel. We use different steel grades for the steel core result in Dead Soft
Annealed, High strength and Extra High Strength Characteristics.
The Copper Clad Steel Wire yields a composite conductivity of 21%, 30% and 40% IACS, and available in Annealed
and Hard drawn. We are delivering products with varied conductivity and tensile strength as per the customer need.
Further, the wire can be processed to be silver plated or tinned copper clad steel wire.
Most Efficient Joint Process/Fail Proof
2. Catenary wires-
suitable for all cases
3. Meshed/ Grid
Conductors- best for
where plane/ pitch
roof surfaces
Lightning Protection As Per NF C 17 102/UNE 211186
The ESE air terminal is a terminal which enables to generate artificially an upward leader earlier than a simple rod, with an
ionization system, in order to establish a special impact on its point. The capture of the lightning strike being faster than a
simple rod, this technology enables to benefit from larger protection areas, ensuring protection for large dimensions structures.
The generated protection radius depends on the early streamer emission value of the air terminal (t in s), its height, and the
efficiency of the protection. The protection radius ensured by this type of air terminal is 120 m (Protection level IV, height = 60
m , early streamer emission time 60s).
The NFC 17-102/UNE 211186 standard describes the installation procedure for this type of air terminal.
The installation of this type of air terminal is easy and cheaper than other technologies.
It can protect whole buildings with one E.S.E. air terminal. It enables the protection of a structure and its environment, the
protection of opened areas and well integrate in the architecture of a structure without aesthetic alteration.
1 ESE, 2 down conductors and 2 earthing systems are necessary to ensure the protection.
The Simple Rod air terminal is composed from a metallic rod with 2 to 8 m height dominating
the structure to protect, and linked to 2 down conductors minimum, and 2 earthing systems.
The protection radius ensured by this air terminal which is limited to 30 m more or less
(Protection level IV, height = 60 m), especially dedicated to the protection of small structures or
areas like towers, chi eys, ta ks, water tower, a te a asts The EN 0 -3 standard
describes the installation procedure for these air terminals.
13 Simple Rods, 13 down conductors, and 13 earthing systems are necessary to ensure the
protection below :
IEC Declaration by CENELEC for
NFC17-102
BT has confirmed that ESE National Standards would remain valid and thus BT recognized
there ould e o e ide e of o fli t et ee NF C a d IEC EN sta dards a d
consequently there is no reason, technical or otherwise, for the withdrawal of the respective
national standard.BT has requested that this standard be modified in order to cancel all
refere e to the IEC EN series, allowing the NF C sta dard to e ist, ith the
proposal of possible future migration to international level (lEC). Accordingly, it was established
that European ESE standards (France, Spain, Portugal, Slovaquia, etc.) will not
conflict with other European standards and will remain valid.
GIMELEC would draw your attention to the fact that
the ter s of refere e of NF C a d
other standards, addressing alternative terminals (NF
C , PR EN ere fro the
outset, er differe t. It is a fa t that NF C ,
whilst referring to ESE Technology also
comments on other standards for lightning protection
systems, particularly incorporating
faraday cage, franklin rod and catenary wire systems.
the 'camouflaging' of NF C 102 by IEC EN
and its proponents, that FRENCH STANDARD
NF C is still in full force.
The ESE air terminal is a terminal which enables to generate artificially an upward leader earlier than a simple rod, with
an ionization system, in order to establish a special impact on its point. The capture of the lightning strike being faster
than a simple rod, this technology enables to benefit from larger protection areas, ensuring protection for large
dimensions structures.
The ge erated prote tio radius depe ds o the earl strea er e issio alue of the air ter i al t i s , its height,
and the efficiency of the protection. The protection radius ensured by this type of air terminal is 120 m (Protection level
IV, height = 60 m , early streamer emission time 60s) The NFC 17-102 standard describes the installation procedure for
this type of air terminal.
The installation of this type of air terminal is easy and cheaper than other technologies. It can protect whole buildings
with one E.S.E. air terminal. It enables the protection of a structure and its environment, the protection of opened areas
and well integrate in the architecture of a structure without aesthetic alteration.
1 ESE, 2 down conductors and 2 earthing systems are necessary to ensure the protection below :
An active and advance technology device based on the principle of
Corona effect.
Economical solution.
Easy to Install.
ESE Installation Guidence
DMC Insulator .
GI/FRP Mast .
Step 1
Separation Sheet
Gel / Silicon
Step 2
Close the filled Silicon enclosure from top and
bottom , complete installation is done.
Step 3
Features :
Provides cable with cable connections and jointing wires in switchboard / electric boxes Being a jelly it can be
easily fit into molds of any shape and size.
Helps in safeguarding electrical connections and also protects electrical connection joints from catching fire, sparking
and leakage current.
Eradicates all the possibilities of fire, electric shocks and sparks, etc. causes due to improper electrical connection
joints and safeguards structure, equipment and person.
Offers safety to your electrical joints from ageing, corrosion, moisture and also observes leakage current.
Advantages :
Nontoxic
Insulating
Highly reliable operation
Maintenance Free
Repairable
Cost Effective
High repeat value
Elasticity
Shape retention
JMVs Clients
Contact Professionals for Advise
We Protect You
Use Electrical Safety
Earthing & Protection
Contact our Team JMV INDIA
Leader and Insperation behind Mr.Neeraj Saini neeraj@jmv.co.in
Mr.Mahesh Chandra Manav Brand JMV HOD manav@jmv.co.in
www.jmv.co.in
Moblie -919910398999
Telecom -9191204590000