Beruflich Dokumente
Kultur Dokumente
B.
Reagents
Chemicals
Reference Materials
Water Specifications
Chemicals
ANALYTICAL GRADE (AR
Suitable for most analytic procedures
Carry ___________________________or ACS and For Laboratory Use or ACS
standard-Grade Reference materials
Ultrapure chemicals
Suitable for _____________________________ pure chemicals (e.g. AAS, EIA, MDx)
Carry designations of HPLC or chromatographic
Reference Materials
Primary standard
Substance of exact known concentration and purity.
________________________
Substance of lower purity with concentration ______________________ with a primary
standard.
Water Specifications
_______________________
Purified by distillation
Deionized water
Water purified by ion exchange (anion or cation exchange risen) with some/all ions
removed
Remove ____________________________and dissolved gases.
Grades of water
Type I water
For test methods __________________________
trace metal _____________________________
Gas, pH, enzyme_________________________
Type II water
For analytical preparations
reagent, QC and standard preparation
Type III/autoclave wash water
________________________
C. Clinical Laboratory Supplies
Thermometers/Temperature
Warming __________________________________________ and is accomplished by
circulating water/ice baths or heating/cooling metal blocks.
A. Liquid-in-glass
Use of a colored liquid or ____________________ in plastic/glass material with a bulb at
one end a graduated stem
Total Immersion
Partial Immersion
Surface thermometer ____________________________________
C. Digital thermometer
Plastic ware
Plastic ware are usually disposable lab supplies
Example of commonly used resins:
Polystyrene
______________________
Polypropylene
Tygon
Telon
Laboratory vessels
Pipets
Burets
Syringes
Graduated Cylinder
Used to _____________________________
Pipets
Glass ___________________________________
Classification of Pipet According to Design or Calibration Marks
To contain (TC)
To deliver (TD)
To contain (TC)
Used for viscous samples
Uses mercury as ______________________________-
Proper use requires ____________________________ solution after content are
delivered into the diluent (rinsing technique)
To Deliver (TD)
Used for _________________________________
Uses distilled water as calibrating medium
A. Serolic pipet
______________________
Generally a blowout pipet
B. Mohr Pipet
No graduation marks to the tip
___________________________________
2. Transfer pipet
(Designed to transfer one volume)
Ostwald-Folin pipet
For ______________________________________
Volumetric pipet
For aqueous solutions (self draining)
Pasteur pipets
Location of the bulb Located at the center (symm Located closer to the delivery tip
etrical)
Transfer pipet
(Designed to transfer one volume)
Ostwald-Folin pipet
Volumetric pipet
Pasteur pipets
____________________
For transferring fluids without consideration of a specific volume
Burettes
For dispensing liquid during titration
Syringes
Used to_____________________________________, chromatography or
electrophoresis
Balances
Centrifugation
a process in _____________________________________to separate solid matter from a
liquid suspension
Consist of head/rotor (attached to the shaft of the motor), carrier and shields.
Filtration
Paper, _______________________________________ and column materials