Beruflich Dokumente
Kultur Dokumente
EXTINGUISHER
GENERAL
ABC Dry Powder is multipurpose for all A, B, C
and
Electrical re risks:
FEATURES
Designed and approved to EN3
Factory lled with high versatile ABC dry
powder for great re knock down
High UV resistant polyester coating for extra
protection from extremely harsh elements
Easy squeeze-grip operation and all metal
handles
Complete with metal brackets (1, 2 kg models
with vehicle brackets).
Heavy duty brackets for marine and truck appli
cations are optional
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 3
ABC DRY POWDER
EXTINGUISHER
GENERAL
ABC Dry Powder is multipurpose for all A, B, C
and
Electrical re risks:
FEATURES
Designed and approved to EN3
Factory lled with high versatile ABC dry
powder for great re knock down
High UV resistant polyester coating for extra
protection from extremely harsh elements
Easy squeeze-grip operation and all metal
handles
Complete with metal brackets (1, 2 kg models
with vehicle brackets).
Heavy duty brackets for marine and truck appli
cations are optional
TECHNICAL DATA
4 GFIRE | www.gulffiresafety.com
FOAN EXTINGUISHER
GENERAL
GFIRE Foam re extinguishers provide a clean-
er and also same effective alternative to dry
powder extinguishers for class A and B re risks
FEATURES
Designed and approved to EN3
All models are tested to clause 9.2 of EN3-7 for
use on Live electrical equipments
High UV resistant polyester coating for extra
protection from extremely harsh elements
Polyethylene ned cylinders for corrosion
resistance
Easy squeeze-grip operation and all
metal handles
Complete with metal brackets (2Litre models
with vehicle brackets)
Heavy duty brackets for marine and truck
applications are optional
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 5
WATER EXTINGUISHER
GENERAL
GFIRE Water re extinguishers is a cost effec-
tive option for class A re risk only
GFIRE Water ADDITNE re extinguishers radical-
ly increase the effectiveness of a water re
extinguisher by up to 300%, as well as reducing
the size of extinguisher required
FEATURES
Designed and approved to EN3
All models except TMWT9 are tested to clause
9.2 of EN3-7 for use on live electrical
equipments
High UV resistant polyester coating for extra
protection from extremely harsh elements
Polyethylene lined cylinders for corrosion
resistance
Easy squeeze- grip operation and all
metal handles
Complete with metal brackets
TECHNICAL DATA
6 GFIRE | www.gulffiresafety.com
CO2 EXTINGUISHER
GENERAL
GFIRE CO2 re extinguishers leave no residue
after discharge, therefore they are ideal for B
and electrical re risks involving electrical
equipments in residential, commercial and
industrial environments like computer rooms,
data storage centres etc.
FEATURES
Designed and approved to EN3
Clean with no harm to machinery equipments
High UV resistant polyester coating for extra
protection from extremely harsh elements
Chrome plated valve with pressure release
mechanism
Fitted with anti-electrostatic hose & horn for
effective discharge
Complete with metal wall brackets. Heavy
duty brackets for marine and truck
applications are optional
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 7
WET CHEMICAL
EXTINGUISHER
GENERAL
GFIRE Wet Chemical extinguishes the re by
forming a soapy foam blanket over the burn-
ing oil and by cooling the oil below its ignition
temperature.
GFIRE Wet chemical extinguishers are on top
of the industry as apart from a good F rating, it
has a nice A and B rating compared to the
foam extinguisher in the market, which make it
really a versatile extinguisher.
FEATURES
Designed and approved to EN3
All models are tested to clause 9.2 of EN3-7 for
use on live electrical equipments
3L and 6L models come with stylish lancer for
easy application
High UN resistant polyester coating for extra
protection from extremely harsh elements
Polyethylene lined cylinders for corrosion
resistance
Easy squeeze-grip operation and all
metal handles
Complete with metal brackets (2Litre models
with vehicle brackets).
TECHNICAL DATA
Model GF-WC2 GF-WC3 GF-WC6
Propellant Type Stored Pressure
Extinguishing Medium Wet Chemical Wet Chemical Wet Chemical
Capacity (Kg) 2 3 6
Height(mm) 405 435 537
Shell Diameter(mm) 110 130 162
Working Pressure(bar) 9
Test Pressure(bar) 27
Full Weight(kg) 3.60 5.40 9.60
Discharge Time Approx.(second) 15 20 42
Temperature Range 50C - +600C
Fire Rating 8A 34B 25F 13A 70B 40F 21A 113B 75F
8 GFIRE | www.gulffiresafety.com
RS RANGE EXTINGUISHERS
GENERAL
GFIRE R SPEC range is a high performance
range, it comes with 6kg powder and 6Litre
foam.
All led with state of the art high performance
reghting agent with top industry re ratings.
FEATURES
Designed and approved to EN3
Factory lled with very high performance
reghting agent
High UV resistant polyester coating for extra
protection from extremely harsh elements
Easy squeeze-grip operation and all
metal handles
Complete with metal brackets
Heavy duty brackets for marine and truck
applications are optional
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 9
MOBILE EXTINGUISHER
ABC POWDER
GENERAL
GFIRE mobile re extinguishers are designed
for large industrial or marine re risks where a
large amount of re extinguishing agent is
required. Mobile extinguishers can be supplied
in a choice of sizes and agents to suit specic
applications.
FEATURES
Designed and approved to EN 1866
Factory lled with high versatile ABC
dry powder for great re knock down
One person operation
Strong and stylish wheel for smooth moving
TECHNICAL DATA
10 GFIRE | www.gulffiresafety.com
MOBILE EXTINGUISHER
C02
GENERAL
GFIRE mobile re extinguishers are designed
for large industrial or marine re risks where a
large amount of re extinguishing agent is
required. Mobile extinguishers can be supplied
in a choice of sizes and agents to suit specic
applications.
FEATURES
Designed and approved to EN1866
Clean and highly effective
One person operation
Strong and stylish wheel for smooth moving
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 11
MOBILE EXTINGUISHER
FOAM
GENERAL
GFIRE mobile re extinguishers are designed
for large industrial or marine re risks where a
large amount of re extinguishing agent is
required. Mobile extinguishers can be supplied
in a choice of sizes and agents to suit specic
applications.
FEATURES
Designed and approved to EN1866
Factory lled with high quality 1.5% AFFF Foam
One person operation
Strong and stylish wheel for smooth moving
Long throw foam nozzle with grip control
TECHNICAL DATA
12 GFIRE | www.gulffiresafety.com
FIXED FIRE HOSE REEL FOR
WALL MOUNTING
GENERAL
Hose reel equipped with an automatic or
manual stop valve. The reel is supplied with a
wall-mounting bracket, which simplies the
installation. The hose reel is suitable for use in
ofce buildings, schools, hotels and confer-
ence centres, hospitals, sports arenas, cine-
mas, airports and shopping centres.
FEATURES
Hose reel with side discs powder coated
RAl3000 red
Integrated automatic stop/manual valve
Jet/spray/shut-off nozzle
Red hose approved to BS EN 694 for
re hose reels
Wall-mounting bracket
Roller hose guide allowing the hose to be run
out in any direction
Centre parts made of brass
Installation instructions
TECHNICAL DATA
GFIRE | www.gulffiresafety.com 13
SWINGING FIRE HOSE REEL
FOR WALL/CABINET
MOUNTING
GENERAL
Hose reel equipped with an automatic
stop/manual valve, mounted on a swinging
arm with internal waterways which swings 180
so that the hose can be run out in all direc-
tions. The hose reel is supplied with a mounting
template, which simplies the installation. The
automatic stop valve opens to provide full
capacity within just two revolutions of the
reel. The hose reel is suitable for use in ofce
buildings, schools, hotels and conference
centres, hospitals, sports arenas, cinemas,
airports and shopping Centres.
FEATURES
Hose reel with side discs powder coated
RAL3000 red
Integrated automatic stop/manual valve
Jet/spray/shut-off nozzle
Red hose approved to BS EN 694 for re
hose reels
Mounting template
Swinging arm with internal waterways, hinged
on right hand side
Optional swing arm without internal waterway
available, supplied with inlet hose pipe.
Centre parts made of brass
Installation instructions
TECHNICAL DATA
14 GFIRE | www.gulffiresafety.com
Optional choices
GFIRE | www.gulffiresafety.com 15
AUTOMATIC SWING TYPE
FIRE HOSEREEL
GENERAL
GF-19-AST-2 (19mm) and GF-25-AST-2
(25mm) swing/recess type, automatic operat-
ed re hosereel are manufactured within a
strict quality controlled environment to ISO
9001:2008 and conformed to BS EN 671-1 speci-
cations.
The elegant design with double pivoted
joints allows the installer the exiblity to x the
hosereel at the back wall or at either left or
right side wall mounting. This installation exibili-
ty greatly helps designers in deciding the
appropriate size of the recessed hosereel com-
partment, especially in areas where space
constraints are critical.
Another unique feature in the hosereel
design is the "slide-in" wall mounting bracket
which is a separate strong and rigid galva- GF-19-AST-2
nised steel bracket that is initially installed onto
the concrete wall without the hosereel. -Maximum length of hose according to
The complete hosereel is then "slide in" BS EN671-2 is 30 metres.
from the top and sits in a tting and rigid
position. The water supply piping is then
connected to the inlet of the hosereel.
The materials used in the manufacture
of the re hosereel are of the highest quality
such as the combination of Grade 304 stainless
steel, high grade aluminium alloy and/or LG2
gunmetal waterway assembly all of which are
corrosion resistant and of high impact strength.
The re reel discs are pressed steel of 1.2mm
thickness and epoxy/polyester powder
coated. The hub is made of deep drawn galva-
nised steel.
FEATURES
Elegant and compact design.
Robust construction
Easy and exible installation
Reliable performance with minimum
maintenance BSI Kitemark 634658
16 GFIRE | www.gulffiresafety.com
AUTOMATIC SWING TYPE FIRE HOSEREEL
STANDARD ACCESSORIES
30 metre long, EN 694 hose
Open/shut, 6mm orice twist operated jet stream nozzle
Brass stopcock or lever ball valve*
Zinc plated hose clamps
Galvanized steel nozzle holder
OPTIONAL
20 & 25 metre length hoses are also available*
Open/shut, 6mm and 8mm dia orice, rotary operated spray/jet nozzle
Galvanized iron union coupling tting
PERFORMANCE DATA
Hose size / Nozzle orifice (mm) GF-19-AST-2 GF-25-AST-2
Flow type Jet Spray Jet Spray
Throw Range (M) 10.3 9.4 11.2 7.9
0.2MPa 28 28 45 48
Discharge Flowrate 38 42 67 64
0.4MPa
(L/min) 46 47 76 75
0.6MPa
GFIRE | www.gulffiresafety.com 17
AUTOMATIC SWING TYPE FIRE HOSEREEL
18 GFIRE | www.gulffiresafety.com
MANUAL SWING TYPE
FIRE HOSEREEL
GENERAL
GF-19-MST-1 (19mm) and GF-25-MST-1
(25mm) swing/recess type, manual operated
re hosereel are manufactured within a strict
quality controlled environment to ISO
9001:2008 and conformed to BS EN 671-1 speci-
cations.
The elegant design with double pivoted
joints allows the installer the exiblity to x the
hosereel at the back wall or at either left or
right side wall mounting. This installation exibili-
ty greatly helps designers in deciding the
appropriate size of the recessed hosereel com-
partment, especially in areas where space
constraints are critical.
Another unique feature in the hosereel
design is the "slide-in" wall mounting bracket
which is a separate strong and rigid galvanised GF-19-MST-1
steel bracket that is initially installed onto the
concrete wall without the hosereel.
-Maximum length of hose according to
The complete hosereel is then "slide in"
BS EN671-2 is 30 metres.
from the top and sits in a tting and rigid
position. The water supply piping is then
connected to the inlet of the hosereel.
The materials used in the manufacture
of the re hosereel are of the highest quality
such as the combination of Grade 304 stainless
steel, high grade aluminium alloy and/or LG2
gunmetal waterway assembly all of which are
corrosion resistant and of high impact strength.
The re reel discs are pressed steel of 1.2mm
thickness and epoxy/polyester powder
coated. The hub is made of deep drawn galva-
nised steel.
FEATURES
Elegant and compact design.
Robust construction
Easy and exible installation
Reliable performance with minimum
maintenance BSI Kitemark 634658
GFIRE | www.gulffiresafety.com 19
MANUAL SWING TYPE FIRE HOSEREEL
STANDARD ACCESSORIES
30 metre long, EN 694 hose
Open/shut, 6mm orice twist operated jet stream nozzle
Brass stopcock or lever ball valve*
Zinc plated hose clamps
Galvanized steel nozzle holder
OPTIONAL
20 & 25 metre length hoses are also available*
Open/shut, 6mm and 8mm dia orice, rotary operated spray/jet nozzle
Galvanized iron union coupling tting
PERFORMANCE DATA
Hose size / Nozzle orifice (mm) GF-19-MST-1 GF-25-MST-1
Flow type Jet Spray Jet Spray
Throw Range (M) 10.3 9.4 11.2 7.9
0.2MPa 28 28 45 48
Discharge Flowrate 38 42 67 64
0.4MPa
(L/min) 46 47 76 75
0.6MPa
20 GFIRE | www.gulffiresafety.com
MANUAL SWING TYPE FIRE HOSEREEL
GFIRE | www.gulffiresafety.com 21
AUTOMATIC FIXED TYPE
FIRE HOSEREEL
GENERAL
GF-19AFT (19mm) and GF-25AFT
(25mm) xed type, automatic re hosereel are
manufactured within a strict quality controlled
environment to ISO 9001 : 2000 and conformed
to BS EN 671-1 specications.
The elegant and compact design with
minimum protrusion allow for easy installation
and maintenance. The compact design great-
ly helps designers in deciding the appropriate
size of the hosereel compartment, especially in
areas where space constraints are critical.
Another unique feature in the hosereel
design is the "slide-in" wall mounting bracket
which is a separate strong and rigid galvanised
steel bracket that is initially installed onto the
concrete wall without the hosereel.
The complete hosereel is then "slide in"
from the top and sits in a tting and rigid
position. The water supply piping is then
connected to the inlet of the hosereel.
The materials that are used to manufac-
ture the re hosereel are of the highest quality
such as the combination of high grade alumini-
um alloy and/or LG2 gunmetal waterway
assembly all of which are corrosion resistant
and of high impact strength. The re reel discs
are pressed steel of 1.2mm thickness and epox-
y/polyester powder coated. The hub is made
of deep drawn galvanised steel.
GF-19-MST-1
FEATURES
Elegant and compact design. -Maximum length of hose according to
Robust construction BS EN671-2 is 30 metres.
22 GFIRE | www.gulffiresafety.com
AUTOMATIC FIXED TYPE FIRE HOSEREEL
STANDARD ACCESSORIES
20, 25, 30 and 36 metre long, EN 694 hose*
Open/shut, 6mm and 8mm dia orice, rotary operated,jet or spray/jet nozzle*
Brass stop valve or lever ball valve*
Zinc plated hose clamps
Galvanised swing roller hose guide
OPTIONAL
20 & 25 metre length hoses are also available*
Open/Shut, 6mm and 8mm dia orice, rotary operated spray/jet nozzle*
PERFORMANCE DATA
GFIRE | www.gulffiresafety.com 23
AUTOMATIC SWING TYPE FIRE HOSEREEL
19mm x 30m
Size x Length A B C D E F
(mmxM) (mm) (mm) (mm) (mm) (mm) (mm)
24 GFIRE | www.gulffiresafety.com
MANUAL FIXED TYPE
FIRE HOSEREEL
GENERAL
GF-19MFT (19mm) and GF-25MFT
(25mm) xed type, manual re hosereel are
manufactured within a strict quality controlled
environment to ISO 9001 : 2000 and conformed
to BS EN 671-1 specications.
The elegant and compact design with
minimum protrusion allow for easy installation
and maintenance. The compact design great-
ly helps designers in deciding the appropriate
size of the hosereel compartment, especially in
areas where space constraints are critical.
Another unique feature in the hosereel
design is the "slide-in" wall mounting bracket
which is a separate strong and rigid galvanised
steel bracket that is initially installed onto the
concrete wall without the hosereel.
The complete hosereel is then "slide in"
from the top and sits in a tting and rigid
position. The water supply piping is then
connected to the inlet of the hosereel.
The materials that are used to manufac-
ture the re hosereel are of the highest quality
such as the combination of high grade alumini-
um alloy and/or LG2 gunmetal waterway
assembly all of which are corrosion resistant
and of high impact strength. The re reel discs
are pressed steel of 1.2mm thickness and epox-
y/polyester powder coated. The hub is made
GF-19-MFT
of deep drawn galvanised steel.
GFIRE | www.gulffiresafety.com 25
MANUAL FIXED TYPE FIRE HOSEREEL
STANDARD ACCESSORIES
20, 25, 30 and 36 metre long, EN 694 hose*
Open/shut, 6mm and 8mm dia orice, rotary operated,jet or spray/jet nozzle*
Brass stop valve or lever ball valve*
Zinc plated hose clamps
Galvanised swing roller hose guide
OPTIONAL
20 & 25 metre length hoses are also available*
Open/Shut, 6mm and 8mm dia orice, rotary operated spray/jet nozzle*
PERFORMANCE DATA
26 GFIRE | www.gulffiresafety.com
MANUAL SWING TYPE FIRE HOSEREEL
19mm x 30m
Size x Length A B C D E F
(mmxM) (mm) (mm) (mm) (mm) (mm) (mm)
GFIRE | www.gulffiresafety.com 27
"BIB-NOSE" PATTERN
HIGH PRESSURE
REGULATING
LANDING VALVE
GENERAL
GFIRE 65mm Gunmetal high-pressure
"Bib-Nose" pattern regulating landing valve is
eld adjustable which allows the user to set the
valve outlet pressure as desired according to
the conditions of the re protection system in
which the valves are installed.
The valve comes with screw, GF-S-65BN-
HP or ange inlet, GF-F-65BNHP connections.
The design and construction of the landing
valve are strictly in accordance with BS5041 :
GF-S-65-BNHP
Part 1 : 1987 and generally to BS5154 : 1991
standards.
It is suitable for connection to a high pres-
sure water supply of up to 21 bars (300 PSI) and
provide a constant reduced outlet pressure
which can be set in-situ during testing and com-
missioning of the re protection system.
This constant uniform set outlet pressure
of the valve, irrespective of its' location in which
it is installed either in a high rise building or
off-shore plants safeguards the reman from
inconsistent hose pressures in a re situation.
The selection of the materials in the man-
ufacture of the valve are all corrosion resistant,
tough and durable. This ensures the product
long-life plus providing an efcient service in the
time of need.
The shut-off of the valve for good
water-tight sealing is achieved by using a high
GF-F-65BNHP
quality rubber bonded seat disc which acts as a
primary rubber to metal seal, whilst a sec-ond-
ary metal to metal shut-off is also incorporated
in the design of the valve.
Every landing valve manufactured is The hydrant valve comes complete with stand-
hydrostatically tested to 22.5 bars and 30.0 bars ard "black: ("Red" is optional) plastic blank cap
for the valve seat and body respectively. The and chain. Alternative blank caps made of
valve outlet static pressure is factory preset at aluminium, brass or gunmetal are available on
7.0 bars (100 PSI) as required in the standard. request.
The internal casting nishes of every valve is of
high quality ensuring a low restriction that meets
the standard's water ow test requirement. BSI Kitemark 634659
28 GFIRE | www.gulffiresafety.com
"BIB-NOSE" PATTERN HIGH PRESSURE REGULATING LANDING VALVE
OPERATION
When the valve is open, the inlet pressure ows into the upper part of the pressure
chamber. By adjusting the spring below, a balance pressure of these two forces determines
the degree of the valve opening to maintain a constant outlet pressure.
When the valve outlet pressure is regulated, it will remain set unless it is being
tempered. The valve outlet pressure setting can only be regulated under a "owing" condi-
tion. A small ow coming out of the valve outlet is sufcient to perform the task.
The valve counter-balance spring design allows the outlet pressure range to be regu-
lated between 3.5 and 12 bars. The inlet pressure ranges from 5.7 to 21 bars.
CONNECTIONS
Inlet : 65mm dia Male BSPT or BS4504 PN16 at-face ange.
Outlet : 65mm BS336 female instantaneous.
Optional inlet ange size, eg., 76mm (3") and type to BS10 Table D or E ange, ASME B16.24
#150 and #300 standards are available upon request.
FEATURES
Compact and elegant design with excellent owcharacteristics
High quality casting nishes
Primary shut-off by rubber to metal and a secondary metal to metal seating
Corrosion resistant and quality materials used for durability, long-life and efciency
Maintenance free
GFIRE | www.gulffiresafety.com 29
GLOBE PATTERN
LANDING VALVES
FLANGE INLET TYPE
GENERAL GF-F-65OBLP
Oblique
GFIRE range of 65mm "low-pressure"
globe pattern landing valves with ange inlet
connection comes in four different congura-
tions namely, GF-F-65OBLP "Oblique",
GF-F-65RALP "Right-Angle", GF-F-65BNLP
"Bib-Nose" and GF-F-65HRLP "Horizontal"
patterns.
The design and construction of the land-
ing valves are strictly in accordance with GF-F-65RALP
BS5041 : Part 1 : 1987 & generally to BS5154 : Right-Angle
FEATURES CONNECTIONS
Compact and elegant design with Inlet : 65mm BS4504 PN16 at-face ange
excellent ow characteristics
Outlet : 65mm BS336 female instantaneous
High quality casting nishes Optional inlet ange size. eg., 76 (3") and type
Primary shut-off by rubber to metal and a to BS10 Table D or E ange ASME B16.24 #
secondary metal to metal seating 150and #300 standards are available upon
Corrosion resistant and quality materials request
used for durability, long-life and efciency
Maintenance free BSI Kitemark 634659
30 GFIRE | www.gulffiresafety.com
GLOBE PATTERN LANDING VALVES FLANGE INLET TYPE
GF-F-65OBLP GF-F-65RALP
GF-F-65BNLP GF-F-65HRLP
CROSS SECTION
1
3
4 7.
12 5
8.
6 9.
8 10.
6 11.
9 12.
10
11
GFIRE | www.gulffiresafety.com 31
GLOBE PATTERN
LANDING VALVES
SCREW INLET TYPE
GENERAL
GFIRE range of 65mm "low-pressure"
globe pattern landing valves with screw inlet
connection comes in four different congura- GF-S-65OBLP
tions namely, GF-S-65OBLP "Oblique", Oblique
GF-S-65RALP "Right-Angle", GF-S-65BNLP
"Bib-Nose" and GF-S-65HRLP "Horizontal"
patterns.
The design and construction of the land-
ing valves are strictly in accordance with
BS5041 : Part 1 : 1987 & generally to BS5154 :
1991 standards. The valves are suitable for both
on-shore and off-shore re protection applica-
tions.
The shut-off of the valve for good
water-tight sealing is done by using a high quali-
ty rubber bonded seat disc which acts as a GF-S-65RALP
primary rubber to metal seal, whilst a secondary Right-Angle
metal to metal shut-off is also incorporated in
the design of the valve.
Every landing valve manufactured is
hydrostatically tested to 16.5 bars and 22.5 bars
for the valve seat and body respectively. The
internal casting nishes of every valve is of high
quality ensuring a low ow restriction that meets
the standard's water ow test requirement. The
hydrant valve comes complete with standard
GF-S-65BNLP
"black" ("Red" is optional) plastic blank cap and Bib-Nose
chain. Alternative blank caps made of brass or
gunmetal are also available upon request.
FEATURES
Compact and elegant design with
excellent ow characteristics
High quality casting nishes
Primary shut-off by rubber to metal and a
secondary metal to metal seating
Corrosion resistant and quality materials
used for durability, long-life and efciency
Maintenance free
GF-S-65HRLP
CONNECTIONS Horizontal
Inlet : 65mm dia male BSPT
BSI Kitemark 634659
Outlet : 65mm BS336 female instantaneous
32 GFIRE | www.gulffiresafety.com
GLOBE PATTERN LANDING VALVES FLANGE SCREW TYPE
GF-S-65OBLP GF-S-65RALP
GF-S-65BNLP GF-S-65HRLP
CROSS SECTION
1
3
4 7.
12 5
8.
6 9.
8 10.
6 11.
9 12.
10
11
GFIRE | www.gulffiresafety.com 33
2-WAY AND 4-WAY
BREECHING INLET
GENERAL
GF-BI4 4-Way and GF-B12 2-Way type
breeching inlets are designed, constructed
and manufactured in accordance with BS
5041 : Part 3 : 1975.
The materials used in the manufacture
of the breeching inlets are in conformity to the
standard's requirement. The body is casted
from spheroidal graphite iron and the inlets are
made of BS1400 LG2 gunmetal and copper GF-B14
alloy parts with bronze spring, stainless steel
locknut, washer, etc.,
The internal part of the breeching inlet
bodies are coated with "black" epoxy cold tar
paint which is a good anti-corrosion protec-
tion.
The inlet blank caps are rubber with
chrome chain. Brass or gunmetal blank caps
are also available on request.
The breeching inlets are individually
hydrostatically tested on the body and inlets
at 20 bars (approx. 300 PSI) and the non-return
valves are tested to 1.7 bars (approx. 25 PSI) to
ensure that no leaks are evident under such
low pressure as required by the standard.
The 2-Way and 4-Way outlet ange
GF-B12
connections are 100mm and 150mm PN16 FF
(standard) respectively. Other ange connec-
tions eg., BS10 Table 'D' or 'E', ANSI #150
at-face (FF) or raised-face (RF) are available
upon request.
FEATURES
Compact and elegant design with
excellent ow characteristics
High quality casting nishes
Corrosion resistant and quality materials
used for durability, long-life and efciency
Maintenance free
BSI Kitemark 634659
34 GFIRE | www.gulffiresafety.com