Selected 0-By CPU: MT6571_EMMC Exe version: NCKDongle AndroidMTK 2.5.6.2 Scenario: Full Flash Skip Preloader Reinsert phone battery. Battery must be charged. Phone must be off with battery inside. Please insert USB cable now... Detected : MediaTek PreLoader USB VCOM (Android) (COM3) Phone detected...Please wait Sending DA agent, please wait... BaseBand CPU :MT6572_S00 BaseBand CPU Secure Version : FF BaseBand CPU Bootloader Version : 01 ---------------------------------------------------- INT RAM: 128 KB SDRAM EXT RAM: 256 MB DRAM ---------------------------------------------------- EMMC: (14Gb+2048Mb) SAMSUNG 0x4e3958524d42 EMMC FW VERSION: 00:00:00:00:00:00:00:00 EMMC CID: 1501004E395852 : 000000000000000000 EMMC UA SIZE: 0x70000000 BOOT STYLE: EMMC BOOT FULL LENGTH: 0x70420000 [1.754 GB] Detecting high speed port, wait...... If driver not installed, install high speed port driver. If not need high speed port, disable it. After repeat opperation. Detecting high speed port, wait...... Detected : MediaTek DA USB VCOM (Android) (COM32) Flash EMMC Algo Start. Starting flash. FORMAT EMMC FLASH : BEGIN: 0x2c740000 - LEN: 0x17800000 FORMAT EMMC FLASH : BEGIN: 0x43f40000 - LEN: 0x52c00000 Error: Invalid begging and end addresses are given for read operation on Flash. Please check your start address and length again. Error: S_DA_INVALID_RANGE [EMPTY]WARNING ..format adress not detected! Warning : S_DA_INVALID_RANGE Error: S_NOT_ENOUGH_STORAGE_SPACE Wait untill phone will start charging.