Sie sind auf Seite 1von 82

IN03/04UserManual

Version:1.0
Date:Aug.2010

Introduction:
This document mainly introduces the operation windows and functions of
IN03/IN04fingerprintdevice.

I
Aboutthismanual

l Notallthedeviceshavethefunctionwith .Therealproductprevails.Ifyou
needit,pleasecontactourbusinessrepresentativeortechnician.
l Thephotographinthismanualmaybedifferentfromthatoftherealproduct.
Therealproductprevails.

I
Tableofcontents

Tableofcontents
1.OperatingInstruction.........................................................................................1
1.1RecommendedOperatingProcedures.......................................................1
1.2HowtoPlacetheFinger ..........................................................................2
1.3AboutAttendance....................................................................................3
1.4Communication ......................................................................................8
1.5MainMenu...........................................................................................10
2.UserManagement............................................................................................12
2.1AddaNewUser....................................................................................12
2.2ManageUser ........................................................................................16
2.2.1SearchUser...............................................................................16
2.2.2QueryAttendanceRecord ..........................................................17
2.2.3EditUser...................................................................................18
2.2.4DeleteUser ...............................................................................19
2.2.5AddUser...................................................................................20
2.3SMS .....................................................................................................20
2.3.1SetSMS....................................................................................21
2.3.2EmployeeCheckSMS...............................................................22
2.4Workcode ............................................................................................23
2.4.1SetWorkCode ..........................................................................24
2.4.2UsetheWorkCode....................................................................25
2.5CardManagement.............................................................................26
2.5.1EnrollCard ...............................................................................26
2.5.2EnrollFingerprintCard..............................................................27
2.5.3 ClearCardInformation..............................................................29
2.5.4CopyCardInformation..............................................................29
2.5.5SetCardParameterValue ..........................................................30
3.CommunicationOption....................................................................................32
3.1NetworkOption ....................................................................................32

I
IN03/04UserManual V1.0

3.2SerialPortOption .................................................................................33
3.3ConnectionOption................................................................................34
3.4 WebSetup.........................................................................................35
4.SystemOption.................................................................................................37
4.1SystemParameter .................................................................................37
4.2DataManagement.................................................................................39
4.3UpgradeFirmware ................................................................................40
4.4KeyboardDefinition .............................................................................40
4.5InterfaceOption....................................................................................42
4.6ResetOption.........................................................................................43
4.7BellOption...........................................................................................44
4.8OtherOptions .......................................................................................46
5.TimeDate .......................................................................................................47
5.1TimeDateOption .................................................................................47
5.2DLST ...................................................................................................47
6.UdiskManagement.........................................................................................49
6.1DownloadData.....................................................................................49
6.2UploadData .........................................................................................50
7.AutoTest.........................................................................................................52
7.1TFTDisplayTest ..................................................................................52
7.2AudioTest ............................................................................................52
7.3KeyboardTest.......................................................................................52
7.4SensorTest ...........................................................................................53
7.5RealtimeClockTest.............................................................................53
8.Queryrecord ...................................................................................................54
9.SystemInformation .........................................................................................56
9.1RecordCapacity ...................................................................................56
9.2DeviceInformation ...............................................................................56
Appendix1.CommonOperations........................................................................57

II
Tableofcontents

1.Keyboard................................................................................................57
2.USB .......................................................................................................58
3.TimeRing ..............................................................................................58
4.T9InputMethod.....................................................................................58
5.QueryRecord .........................................................................................60
6.PropagandaPictureUpload .....................................................................60
7.PrintFunction .....................................................................................61
8.ImportShortMessage .............................................................................64
9.CardSupport(ID,EMandMifareCard) ............................................65
10.14DigitsCode ................................................................................65
11.DaylightSavingTime............................................................................66
12.BackupBattery .....................................................................................66
13.PhotoIDFunction.............................................................................67
14ConnectC1Controller ......................................................................68
15.WebServer .......................................................................................68
Appendix2.AbouttheHumanRightsPrivacyStatement .....................................71
Appendix3.EnvironmentalProtection ................................................................73

III
1. Operating Instruction

1.OperatingInstruction

1.1RecommendedOperatingProcedures
Step1:Installthedeviceandpoweritup.
Step 2: Enroll users by registering his/her fingerprints, passwords or card. Assign
userssecurityprivilegesdirectlyonthedevice.
Step3: After enrolling users, verify thathis/her enrolled fingerprint, passwords or
cardis valid.
Step 4: Configure the device communication settings. Then download the users
newly enrolled information from the device into the Attendance Management
software on the computer.Data can betransmitted via TCP/IP, RS232 and RS485
clientorbyusingaUSBflashdrive.
Step5: Verifythe devicedisplaysthe correctdayandtime.Thenstarttoattendance.
Step6:DownloadattendancerecordstotheAttendanceManagementandstatthem
attheendofthemonth.

1
IN03/04UserManual V1.0

1.2HowtoPlacetheFinger

Enrollfingerprintbypressingindexfinger,middlefingerorringfinger(thumb
andlittlefingerareclumsy).

1) Properpress:

Make finger center pressed on the


sensorwindow.

2) Improperpress:

Upright Toolean

Slant Toodownward

Pleaseadoptthecorrectwaytoplacethefingertoavoid improperoperation
ledtotheidentificationperformancedegradation.

2
1. Operating Instruction

1.3About Attendance
When the device is in standby status, only after successful fingerprint or
passwordverification,canusersaveattendance recordonthedevice.
Standbystatus:Asshownbelow:

Thepicturedisplayedinstandbystatuscanbepictureuploadedbyuser(referto
upload userdefined picture). It can also be time display (refer to 4.5 Interface
Option).
1. Selectattendancestate:

Mode1:
Whenthedevice isinstandby status, pressstate key on the deviceto modify
attendance state, and the state information will be displayed on the screen. The
current selected state is displayed in orange. Press ESC, the prompt information
willdisappear.Referto 4.4 KeyboardDefinitionfordefaultstatekeydefinition.

3
IN03/04UserManual V1.0

Mode2:
Various states can be set by user. Therefore, not all state information is
displayeduponkeypress.Correspondingstatescomeoutontheleftbottomcorner.
2. IdentityVerification
Aftersuccessfulattendancerecord,thedevicewilldisplaythecurrenttimeon
thescreeninclockmode.
(1) Fingerprint Matching
1: Nfingerprintmatching:
Verifythefingerprintpressedonthesensoratpresentwithallfingerprintdata
inthefingerprintreader.
Step1: Pressfingerprintproperlyonthesensor.
Step2: IfthedevicesaysThankyou,theverificationiscomplete.

IfthedevicesaysPleasepressagain,return Step1 forsecondoperation.

4
1. Operating Instruction

1:1fingerprintmatch (UserIDfingerprint)
Verify the fingerprint pressed on the sensor at present with the fingerprint
relatedusernumber.Usethismethodwhen the fingerprint isdifficulttoidentified.
Step1: InputUserIDofemployeetobeverifiedontheinitializinginterface.

Step2: Pressfingerprintproperlyonthesensor.
Step3: IfthedevicesaysThankyou,theverificationiscomplete.

IfthedevicesaysPleasepressagain,return Step2 forsecondoperation.

5
IN03/04UserManual V1.0

Employeecantryanother2timesbydefault.Therepeatedtimescanbesetin
4.5 InterfaceOption.Ifitfailsafter2times,return Step1forsecondoperation.

(2) PasswordMatching
Step1:InputUserID ofemployeetobeverifiedontheinitializinginterface.
Thenpress OK.
Step2:Ifitsaysthattheenrollnumberiswrong,itmeansthatthereisnosuch
number. If it prompt place finger, it means that the employee doesnt enroll
password.

Step3:Inputpasswordwhentheinterfaceappears.

Step4: IfthedevicesaysThankyou,theverificationiscomplete.

6
1. Operating Instruction

Whenthedevicesayspassworderror,pleaseinputpasswordagain.

Employeecantryanother2timesbydefault.Therepeatedtimescanbesetin
4.5interfaceoption.Ifitfailsafter2times,returnStep1forsecondoperation.

(3) CardMatching

Step 1:Wave the cardneartheinduction area, aftertheinduction equipment


findthecard,removesthecardagain.
Step 2: When the equipment give us a tip, "Thank you", the certification
completed.

7
IN03/04UserManual V1.0

Step3:Ifthecardhasnotregisteredyet,promptthatcardisnotregistered

J Note:Onlysometypesofdeviceshavethisfunction.Thecardsensingarea
isroundthefingerprintsensor.

1.4Communication
The device only records attendance time. The statement can be disposed by
software on PC. Therefore, it is necessary for device to connect PC to download
attendancerecordtoattendancesoftware.
Thefollowingaresomeconnectionmethod:

1. Ethernet:

(1)Through Hub:Usestraight line(to connectthe deviceand hub) to connect

8
1. Operating Instruction

deviceintothenetwork.
(2)Direct connection:Use crossover cable(to connect two Ethernet terminals
directly)toconnectdeviceandPC.
Set ondevice:
Entermenuoption communicationoption tosetthefollowingitems:
IPaddress: DefaultIPas192.168.1.201.Youcanmodifyitifitisnecessary.
Subnetmask:Defaultsubnetmaskas255.255.255.0.Youcanmodifyitifitis
necessary.
Gateway address: Default gateway address0.0.0.0. You can modify itif it is
necessary.
Networkspeed: Therearethreeoptions:ATUO,10M,and100M.
Connectionpassword:Itcanbesetornotset.Ifitisset,inputcorresponding
numericalvalueonconnectioninterfaceofPCsoftware.

2. RS232:

UseRS232serialportwireforconnection.
Set ondevice:
Entermenuoptioncommunicationoption tosetthefollowingoptions:
Baudrate:Communicationspeedrate(withcomputer),ifthecommunication
speedishigh,RS232(115200, 57600) isrecommended.
RS232: SelectOnforRS232.
Communication password: It can be set or not set. If it is set, input
correspondingnumericalvalueonconnectioninterfaceofPCsoftware.

3. RS485

Set ondevice:
Entermenucommunicationoption tosetthefollowingoptions:
DeviceID:1254.
Baudrate:Communicationspeedrate(withcomputer),ifthecommunication

9
IN03/04UserManual V1.0

speedislowandstable,RS485 (9600, 38400) isrecommended.


RS485: SelectOnforRS485.
Communication password: It can be set or not set. If it is set, input
correspondingnumericalvalueonconnectioninterfaceofPCsoftware.

1.5Main Menu
StartattheCheck/ClockInscreen.PresstheMenukeytoopentheMainMenu,
asshowninthefollowingfigure(If youhavesettheMenukeyasashortcut,long
presstoentertheMainMenu):

User management: Browse the users basic information like ID, name,
fingerprint,card,passwordand privilegeandsoon Increase,editordeleteoperation
thebasicinformationSettheworkcodeforuserandcardmanagement.
Communication: Set up communication parameters between the equipment
andthePC,includingIPaddress,gateway,subnetmask,baudrate,devicenumber,
communicationspasswordetc.
System: Manage the data and set the system parameters, including basic
parameters, interface parameters, fingerprint and attendance parameters, to
maximizemeetusersneedsinthefunctional,displayandotherareas.
Date/Time: Device time date should set accurate to ensure the accurate
attendancetime.
PenDrive:ByUSB,theuserinfoandattendancedataetc.canbeimportedto
theaccordinglysoftwaretodealorimporttheuserinformationforotherfingerprint

10
1. Operating Instruction

devices to use.
Auto Test: automatically test the function of each module if it is workable,
includingthescreen,sensor,voice,keyboardandclocktests.
Record:Forquerytherecordsavedinthedeviceconvenience,queryrecord
functionisprovided.
SysInfo:Usesysteminformationtocheckthecurrentdevicessavingstatus,
itsversioninformationandsoon.

11
IN03/04UserManual V1.0

2.User Management

Theusersbasicinformationonthedeviceincludesfingerprint,passwordand
management Privilege. In companys attendance management, for employees
change,theinformationonthedevicealsoneedsmodification.Therefore,operations
includingadd, delete,check,modifyandsooncanbedoneonthedevice.

2.1 AddaNew User


Firstly,enrollemployeesfingerprint, password orIDnumber inthedevice.
Enter Newuser interface:

ID NO: Staff's attendance number. More details please refer to Appendix1


CommonOperations.
Name: InputusersnamewithT9inputmethod.

12
2. User Management

FP (Fingerprint): Enroll employees fingerprint. Ten fingerprints can be


enrolled at most. The employee with fingerprint enrolled can use fingerprint to
recordattendance.
PWD (Enroll password): enroll users password. The effective digit is 18.
The employeewithpasswordenrolledcanusepasswordtorecordattendance.
Card: Registeredstaff's Card, only the registered cardis possible to check
attendance.
Privilege:Usersarepeoplewhoseidentitymustbeauthenticatedbeforeentera
menu.Theordinaryconsumercantrackattendancebythecardorthepasswordonly
the manager may equally carry onthe daily checking attendancewiththe ordinary
consumer,butmayenterthemenutooperateeachoption.

K Note:Whenthereisnoappointedthemanager,anypersonallmayentrythe
menuoperationafterthemanagerisappointed,anyoneisunabletoentrythe
menu until the manager status is confirmed, after the success can entry the
menu
Thefollowingisthe procedureforadduser.
1. InputUserID
1) AllocateUserIDbydefault.
2) Press to delete the allocated User ID by default. Input User ID from
keyboard.IftheUserIDiswrong,youcanpress buttontoinputitagain.

Note:Theautomaticallyallocatefunctiononlyfor5digitcodedevice.The9
digitscodedevicecannotallocateIDnumber.Wearenotrecommendedtousethe
systembackupIDnumber8888.
2. Inputname
Use T9 input method to input employees name.More details please refer to
Appendix1CommonOperations.
Press OK or / to select Enroll fingerprint, then press OK to start

13
IN03/04UserManual V1.0

fingerprint.
3. Enrollfingerprint

Press finger according to devices prompt. Press the finger three times in the
properway.
Ifonefingerprintisenrolledsuccessfully,pressOKtocontinueanotherfinger,
orpress ESC toreturnthelastinterface.
Press/toselectenrollpasswordandpress OK toenrollpassword.
4. Enrollpassword

Input password (18) according to the prompt, and press OK to verify it.
Thenpress OK saveitorpressESC toexitwithoutsavingit.
Aftersaving, displaywillbeonthedevice,whichmeansthepasswordhas
beenset.
5. Enrollcards
Scroll/keystolocatethecursoronenrollcard"button,andpress"OK"

14
2. User Management

toentertheregistrationcard.

Slightwarethecardneartheinductionarea,aftertheequipmentfoundthecard
number,press OKkeytosave,pressESC togiveup,thenremovethecardfromthe
equipment, after the "Enroll successfully" the card number will display on the
registerbutton.
6. Privilegesetting
Scrollthe/key andlocalcursoronthe"Privilege"optionbox,scroll /
keytochooseprivilege.
7. Save/exituserregistration
To confirm the registration information is correct, after getting confirmation,
saveit.
Thewayforsaving:
1)scroll/key to locate cursor on the " "button, please press "OK"
keyagain,theprompt"thedatahasbeenchanged,Areyousuretosaveit?onthe
equipment,press"OK"thekeytosaveit,ifyoudonotwantsaving,press"ESC"to
exit.Iftheprompt,Savesuccessfully!Continuestoinput?"appearonequipment,
wantcontinuingtopress"OK",ifyouabandonthisoperation,press"ESC"key.
2)PressESCkeyorscroll/keytolocatethecursoronthe"ESC"button,
pleasepress"OK"keyagain,theprompt"thedatahasbeenchanged,Areyousure
tosaveit"appearonequipment,press"OK"keytosaveandreturntothepreceding
ofmenus,doesnotserveandreturntotheprecedingofmenus,press"ESC"key.

15
IN03/04UserManual V1.0

2.2ManageUser
All users information saved in the current device can be queried in manage
user,including user name, fingerprint count, whetherto enroll password or card,
userattendancerecordandsoon.Editingordeletingusercanalsobedonehere.

J Notice: means this employee is the administrator. means

passwordhasbeenenrolled. meansIDCardhasbeenenrolled.
Press ontheaboveinterface,andtheoperatingmenuwillpopout:

Press/toselecttheitem.

2.2.1 Search User

Ifmanyusersareenrolled,inordertofindanemployeequickly,thedevicehas
providedUserIDtosearchtheemployee.
Press onmanageuserinterfacetogetoperatingmenu.SelectSearch

16
2. User Management

userorpressanynumerickeytoenterthefollowingpage:

InputUserIDofemployeetobequeried.PressOK,aftersuccessfulquery,the
blue cursor will pointto the employee. If thereis no suchemployee, no enrolled
datawillappear.

2.2.2 Query Attendance Record

When administrator is checking employees fingerprint and other enrolled


information,hecanalsochecktheemployeesattendancerecordduringthatmonth.
Press on manage user interface to get the operating menu, select
record, andtheemployeesmonthlyattendancerecordcanbechecked:

J Notice: The picture may be different from your device. The real product
prevails.

17
IN03/04UserManual V1.0

Press/toreadattendancerecord.
Press OK toquerydetailedinformation.

ThenpressESCtoreturnto manageuser interface.

2.2.3 Edit User

Edit user information saved in the device. For example, the former enrolled
fingerprintsareunusable,entereditusertoreenrollfingerprint,passwordorcard.
Use/ or query user on manage userinterface to select employee to be
edited. Then press to select edit or press shortcut to verify it, and all
enrolledinformationcanbedisplayedonthedevice:

J Notice:Onlysomemodelshave enroll cardoptions.


User ID cannot be modified. The operation is similar to that of add user.

18
2. User Management

Fingerprint can be reenrolled. Clickenroll password directly to set password or


modifypassword.Theaccesscanalso bemodified.
Saveedition/ exitedition
(1) Press or / to OK(M/ON), press , save edition and
returnto manageuser interface.
(2)Press ESC or / to selectESC andthenpressOK,and the device
willpromptdatahasbeenchanged.Areyousuretosave?If youwanttosaveit,
press OK andreturn tothelastmenu.OrpressESCtoreturnthelastmenu.

2.2.4 DeleteUser

Del user is to delete employees partial information or all information from


thedevice.Itisusedwhenthefollowingstateshappen:
1)Whenemployeesfingerprintorpasswordisnotneededanymore.
2)Whenemployeeleavestheposition.
Press/onmanageuser interfaceoruse queryuser toselecttheemployee
tobeedited.Click OK togetoperatingmenu,andthenselectdeleteuser.
Deleteuser:

J Notice:OnlysomemodelshaveDelIDCardOnlyoptions.
Iftheuserhasnofingerprintorpassword,thecorrespondingitemisblueand
cannotbeoperated.Press/toselecttheitemtobeoperated.PressOKtopop

19
IN03/04UserManual V1.0

out dialog box and verify whetherto deletethisitem or not. Then the device will
givecorrespondingprompt.PressESCtoreturnto manageuser page.

2.2.5 Add User

Inordertoadduserconvenientlyforoperator, adduser isconfiguredhere.The


functionisthesameasthatof 2.1AddUser.

2.3SMS

SMSis similarto notice. The operator can editthe notice content in advance
and set the receive user and appear period. SMS includes common SMS and
individual SMS. If common SMS is set, icon will be displayed in
informationcolumnatthebottomofstandbyinterfaceinthespecifiedtime.Youcan
press shortcut (can be set in keyboard definition) to check SMS content. If
individual SMS is set, the employee who can receive SMS can see SMS after
successfulattendance.
Operation:

J Notice: The picture may be different from your device. The real product
prevails.
Press/toreadSMS.

20
2. User Management

Press OK togetSMSsettingmenu.
PressNewtocreateanewSMS,presstoeditthecurrentSMS,pressDelete
tothecurrentSMS.

2.3.1SetSMS

AddSMS:
Press/inpopoutmenu, selectNewtoadd a SMS.
Starttime: ThetimewhenSMScomesintoeffect
Valid: SMS appears in the effective time. After the effective time, it wont
appear.
Type:
Individual: SMSaimedatindividualonly
Public: SMSabletobeseenbyallemployees
Reserved:PresetSMS,nodifferenceofindividualSMSorcommonSMS.
Operation:

Whenthecursorisonthetextbox,youcanpressshortcuttoenableT9input,
input SMS content. Press / to switch option input box. Press / icon to

21
IN03/04UserManual V1.0

changesettingorpressnumerickeyonsmallkeyboardtoinputvalue.
(1) If the selected type is individual SMS, distribute is usable. Here, it is to
distributeindividualSMStoemployee:

Press/to searchemployee.
Press OK toselecttheemployee,andSMSwillbedistributedtohim.
PressESC tosaveitandthenexit.

J Notice: If exit without selecting any employee, the SMS type will become
preset.
(2)If the selected type is common SMS or preset SMS,distribute cannot be
used.Aftersetting,press OK tosaveitandreturntoSMSlist.
EditSMS:
Press/inpopoutmenutoselectEdit,andSMScanbeedited.
Theoperationisthesamewiththatof addSMS.
DeleteSMS:
Press/inthepopoutmenutoselectDelete,andtheselectedSMScan
bedeleted.Atthesametime,allinformationrelated withthisrecordcanbecleared.

2.3.2EmployeeCheckSMS

1.CheckcommonSMS
When appears on main interface of the device, press shortcut(defined

22
2. User Management

inkeyboarddefinition) tocheckcurrenteffectivecommonSMSintime.

2. CheckindividualSMS
When userpasses verification, if the user has SMS, the SMS content will be
displayed.

The information display time length is 30 seconds. During this period, user
verificationcanbedone.Closethecurrentdisplaytoenterverificationinterface.

2.4 Workcode
Salary isbased on attendance.There are many worktypes for employees. An
employee may have different work type in different time period. Different work
types have different pays. Therefore, in order to distinguish different attendance
states when user is dealing with attendance data, the device has provided a
parametertomarkwhichattendancerecordbelongstowhichworktype.

23
IN03/04UserManual V1.0

Operation:

J Notice: The picture may be different from your device. The real product
prevails.
Press/toreadworkcode.
Press OK togetworkcodesettingmenu.
Press New to create a new workcode, press Edit to modify the current
workcode,pressDeletetodeletethecurrentworkcode.

2.4.1 Set Work Code

Addworkcode:
Press/inpopoutmenutoaddaworkcode.
Code:Workcode
Name: Toindicatetheworkcode

24
2. User Management

Editworkcode:
Press / in popout menu to select Edit, and edit the name of selected
workcode.Theoperationissimilartothatof Addworkcode.
Deleteworkcode:
Press/inpopoutmenutoselectDelete,deletetheselectedworkcode.

2.4.2 Use the Work Code

Youcanpressshortcutonstandbyinterface(canbesetinkeyboarddefinition)
toenterworkcodeoptioninterface.

J Notice: The picture may be different from your device. The real product

prevails.
Usercaninputworkcodedirectlyorpress/toselectworkcodefromthe

25
IN03/04UserManual V1.0

listandpress OK tosaveitandthenreturntothemaininterface.

2.5CardManagement
Support Mifare nontouch intelligent card with working frequency of
13.56MHZ. Integrate fingerprint attendance to other systems and support multi
verificationmodetomeetthedemandsofdifferentpeople.
Operation:

Press / to select your desired item, press OK to execute the current


selecteditem.

2.5.1Enroll Card

UseMifarecardasIDcard.Onlycardnumberisneededtoenroll.
Enrollment
Step1: Select enrollcard andthenpress OK.

26
2. User Management

Step 2:Presskeyboard to input the numberto be enrolled(ifthe numberhas


beentherealready,thedevicewillpromptyoutocopytheinformationtothecard),
andthenpress OK.

Step3: Thedevicepromptstoshowcard.
Step4: Putthecardintheinductionareauntiltheoperationissuccessful.
Verification:
Swaythecardintheinductionarea.Afterthedeviceinductsthecard,movethe
cardoff.Whentheverificationissuccessful,thedevicewillgiveprompt.

K Tips: Please enter user access control option to modify the verification
modeasRF,orverificationwontbesuccessful.

2.5.2Enroll Fingerprint Card

Enrollfingerprintandwritefingerprintintocard.
Enrollment:
Step1: Select enrollfingerprintcard andpress OK.

27
IN03/04UserManual V1.0

Step 2: Use keyboard to input the number to be enrolled (if the number has
beentherealready,thedevicewillpromptyoutocopytheinformationtothecard),
andthenpress OK.Thedevicewillpromptyoutomoveoffyourfinger.

Step3: Pressfingerproperlythreetimes.
Step4: Devicepromptspleaseshowcard.

28
2. User Management

Step 5: Put the card in the induction area, waiting for the device to read
fingerprintdataintocarduntiltheenrollmentsucceeds.
Verification:
Swaythecardintheinductionarea.Afterthedeviceinductsthecard,movethe
card off. When the verification is successful, the device will give prompt. If the
pressedfingerprintisdifferentfromthat storedinthecard,theverificationwillfail.

2.5.3Clear Card Information

Deletealltheinformationinthecardbeingoperatedatpresent.
Operation:

Putthecardintheinductionarea,waitingfordevicetodeletealltheinformation
inthecard.Ifthecarddatahasbeenstoredinthedevice,thedevicewillremindyou
whethertodeletetheinformationinthedeviceornot.Yesistodeletetheusers
fingerprintandinformationinthedevice.Noistokeeptheinformation.

2.5.4Copy Card Information

Copy card information to the device (after copy, the fingerprint is still in the
card), then press fingerprint attendance directly on the device, with no need of
usingMifarecard.
Operation:

29
IN03/04UserManual V1.0

Press/to selectonly copy user information or copy user information


andfingerprint,andthenpress OK.

2.5.5SetCard Parameter Value

Set password of Mifare card and decide whether the information should be
savedornot.
Fingerprint card password: After the password is set, the device will write
password into the enrolled fingerprint card. Then the fingerprint card can only be
usedonthisdevice.
Savetheinformation:Decidewhethertosavetheenrolledinformationtothe
devicewhenenrollingcardorfingerprintcard. Nomeanstheinformationisonly
savedinthecard.Yesmeanstheinformationissavedinbothcardanddevice.
Operation:

30
2. User Management

Press/to move cursor to the item to be set. If it is the input box, press
numerickeysonsmallkeyboardtoinputthevalue.Ifitistherollbox,youcanpress
/ to switch the values. After setting, press OK directly to return to the last
interface.PressESCtocancelsettingandreturntothelastinterface.

J Notice:Cardinductionareais3cm5cmabovefingerprintreader.

31
3. Communication Option

3.CommunicationOption

When the device and PC are used to transmit data, it is necessary to use
communication wire to set communication parameters in the device. When the
deviceisincommunication,communicatingappears.Dontoperatethedevice
then.

@ Notice:Whenthedeviceiscommunicatingwithcomputer,pleasecheckthe
setting here. The parameters here must be in accordance with that of software
communicationinterface.

3.1NetworkOption

When Ethernet is used for communication of device and PC, the following
settingsneedtobechecked:
Device IP address: IP is 192.168.1.201 by default. You can modify itif itis
necessary.ButitcannotbethesamewiththatofPC.
Subnet mask: It is 255.255.255.0 by default. You can modify it if it is
necessary.
Gatewayaddress:Itis0.0.0.0bydefault.IfthedeviceandPCareindifferent

32
3. Communication Option

netsegment,itisnecessarytosetaddress.
Netspeed: SetthespeedaccordingtotheLANwherethedeviceis.
Operation:

Press/to move cursor to the item to be set. If it is the input box, press
numerickeysonsmallkeyboardtoinputthevalue.Ifitistherollbox,youcanpress
/ to switch the values. After setting, press OK directly to return to the last
interface.Press ESCtocancelsettingandreturntothelastinterface.

3.2SerialPortOption

Whenserialport(RS232/RS485)isusedforcommunicationofdeviceandPC,
thefollowingsettingsneedtobechecked:
Baud rate: Used for communication with PC. There are five options: 9600,
19200, 38400, 57600 and 115200. If the communication speed is high, RS232 is
recommended.Ifthecommunicationspeedislow,RS485isrecommended.
RS232: Whether use RS232 to communicate. Select Yes if RS232 is to be
used.
RS485: Whether use RS485 to communicate. Select Yes if RS485 is to be
used.
RS232 and RS485cannotbeusedatthesametime.

33
IN03/04UserManual V1.0

J Notice:OnlysomemodelshaveUSBcommunications.
Operation:

Press /tomovecursortotheitemtobeset.Youcanpress / toswitch


thevalues. Aftersetting,pressOKdirectlytosaveandreturntothelastinterface.
PressESCtocancelsettingandreturntothelastinterface.

3.3Connection Option

When RS232/RS485 is used for communication of device and PC, it is


necessarytosetdeviceID.
DeviceID:1254.IfRS232/RS485isused,thisIDneedstobeinputonthe
softwarecommunicationinterface.
To improve the security of attendance data, connection password needs to be
sethere.ConnectionpasswordmustbeinputwhenPCsoftwareistoconnectdevice
toreaddata.
Connection password: Systempasswordis0by default(namely, thereis no
password).Itcanbesetasothervalue.Aftersetting,thepasswordmustbeinputif
softwareistocommunicatewithdevice.Ortheconnectionwillfail.Thepassword
lengthis16digits.
Print mode: Print mode includes None, Mode 1, Mode 2, Mode3, Mode 4,

34
3. Communication Option

Mode5,Mode6andMode7. WhenselectNone,itwillshutdowntheprintfunction.
When select Mode 1 to 7, it will print therecord after fingerprint or password or
card verification. The print function refers to this manual appendix Appendix1
CommonOperations.
Operation:

Press / to move cursor to the input box. Press numeric key on small
keyboard to input the value. After setting, press OK directly to return to the last
interface.PressESCtocancelsettingandreturntothelastinterface.

J Note: Print function is not a standard one. If needed, please contact our
BusinessRepresentativeortechnicalsupport.

3.4 WebSetup

WhenthedeviceusesGPRSorADMSfunctions,itrequiredtoconnecttothe
server.Beforetheconnection,theuserneedstosetupIPaddressoftheserverinthis
interface.MoredetailaboutthefunctionofGPRSandADMSrefertorelateduser
manuals.
Operation:

35
IN03/04UserManual V1.0

Press /tomovecursortotheitemtobeset.Ifitistheinputbox,pressnumeric
keysonsmallkeyboardtoinputthevalue.Ifitistherollbox,youcanpress /
toswitchthevalues. Aftersetting,pressOKdirectlytosaveandreturntothelast
interface.PressESCtocancelsettingandreturntothelastinterface.

J Note: This function is not a standard one. If needed, please contact our
BusinessRepresentativeortechnicalsupport.

36
4. System Option

4.System Option

Setsystemparameterstomeetusersdemandasmany aspossible.

4.1System Parameter

1: 1 matching threshold: The similarity of ID + fingerprint verification and


theenrolledtemplate
1: N matching threshold: The similarity of verification and the enrolled
template
Recommendedmatchingthresholdvalue:
Matchingthresholdvalue
FRR FAR
1:N 1:1
high low 45 25
middlemiddle 35 15
low high 25 10

Date Fmt: Time format displayed on the initializing interface of fingerprint


sensor
You can press / to selecttheformat.The fingerprint sensor supportsten

37
IN03/04UserManual V1.0

date format: YYMMDD, YY/MM/DD, YY.MM.DD, MMDDYY, MM/DD/YY,


MM.DD.YY, DDMMYY, DD/MM/YY, DD.MM.YY and YYYYMMDD. Select
yourdesireddateformat.
Keybeep: Press / to set whether the key has voice or not. Yes means
havingvoice,andNomeansnovoice.
Fingersensitivity:Adjustthefingerprintsensors,thefingerprintsensoraretoo
sensitivity,lowerthevalueWhenthefirstfingerprintsensorsistooslow,increase
thevalueof(Scope1~10).
Voice:Press / toselectwhethertogivevoicepromptornot.Thedevice
willgivecorrespondingvoicepromptduringoperation.
Vol:Press / tosetit.
AlgVersion: The devicealgorithmversionof fingerprintsensor.
RecheckMin: Itisinthesettimerange (Unit: minute).Ifsomebodysattendancerecord
hasbeenthere,thenthe attendance record afterthat wontbesaved (Effectivevalueis0
60minutes.0means alltherecordsafterverificationaresaved) .
Log Alert: When the free space reaches the set value, the device will give
alarmautomatically(Effectivevalueis099,0meansthereisnoalarmwhenthe
spaceisallused).
Operation:

Press / to move cursor to the input box. Press numeric key to input the

38
4. System Option

value.Ifitistheinputbox,pressnumerickeysonsmallkeyboardtoinputthevalue.
If it is therollbox, you can press / to switch the values. Aftersetting,press
OK directly to save the setting and return to the last interface. Press ESC to
cancelsettingandreturntothelastinterface.

4.2Data Management

Deleteattendancerecord: Deleteallattendancerecords.
Delete all data: Delete all enrolled employees information, fingerprint and
attendancerecord.
Clearmanagementaccess: Changealladministratorsintocommonusers.
Operation:
Press /tomovecursortotheselectedbutton.PressOKtostartoperation.
Thedevicewillremindyouwhethertocontinuethecurrentoperationornot.Then
press OK to delete all the data, which wont be recovered after deletion. Press
ESCtoreturntothe lastinterface.
Clear propaganda picture: Clear the propaganda pictures uploaded to the
devicefromUdisk.(RefertoUploadUserDefinedPicturein6.2UploadDatafor
howtouploadthepropagandapictures.)
Operation:

Press/ to preview the propaganda picturesin the device.ClickOKto

39
IN03/04UserManual V1.0

delete allthese pictures. After deletion,the next picture will appear. Clickdelete
alltodeleteallthepropagandapicturesinthedevice.ThenpressESCtoreturn
to datamanagement interface.

4.3UpgradeFirmware
UpdatethefirmwarebyutilizingtheUSBPenDrive (flashdrive)

@ Notice: If you need such upgrade file, please contact technician. Usually,
firmwareupgradeisnotrecommended.
Operation:
Insert U disk with upgrade file into the slot. Thedevice will identify the file
automatically.Thedevicewillgivepromptwhetheritissuccessfulornot.

4.4KeyboardDefinition
Userdefinedthedevicesattendancestatuskey.Presscorrespondingstatuskey
torecordattendance.
Press any status key on the standby interface, and the attendance status and
statuskeywillbedisplayedat theleftbottomofthescreen.
Operation:

Press/toread shortcutdefinition.
Press OK toedittheselected shortcut.
1. SetShortcut:

40
4. System Option

Selecta shortcut, press OK toenter edit interface.


Function: Set shortcut function for his key, including status key, work code
andSMScheck.
Thefollowingoptionswillappearafterthestatuskeyisselected:
No.: Allocate a code for status key to provide unconvenience to check the
recordstatistics.
Name: Thenameofkeystatus.
Auto switch: When it reaches the set time point, the device will switch the
attendancestatusautomatically.
1) Setitasfunctionkey
Operation:

Press / toset theshortcutkey.


2) Setitasstatuskey

41
IN03/04UserManual V1.0

Press / to move cursor to the input box. Press numeric key on small
keyboardtoinputthevalue.Aftersetting,pressOKdirectlytosavethesettingand
return to the last interface. Press ESC to cancel setting and return to the last
interface.
2. Use Shortcut:
1)Statuskey
Pressrightcursorkeyonstandbyinterfaceandthecorrespondingstatuswill
appearattheleftbottom.

2) Shortcutkey
Set0 as workcodein setting.
Press0onstandbyinterface toentertheinterfaceofworkcode.

4.5InterfaceOption
Whenuserisusing1:1matchorpasswordverification,hemayforgettoenroll

42
4. System Option

fingerprint or does not press the finger in the proper way. For users convenience
andtoreducerepeatkey,thedeviceallowsretry.Usercansetinitializinginterfaces
displaystyle.
Selectclock: After verification, the selected clock mode willbedisplayed on
thescreen.
Display propaganda picture:User can display some propaganda pictures on
thescreen.
1)Picturecycleintervalmeanshowsoonwillthepicturebechanged(effective
valueis3999seconds.)
2) Time display delay means the clock picture display time length after
verification.Afterthedisplaydelay,thepropagandapicturewillbedisplayedonthe
initializing interface again (with effective value of 0999 seconds, and 0 means
displayingclockallalong.)
Operation:

Press / to move cursor to the input box. Press numeric key on small
keyboardtoinputthevalue.Aftersetting,pressOKdirectlytosavethesettingand
return to the last interface. Press ESC to cancel setting and return to the last
interface.

4.6ResetOption
Makedevicescommunicationoption, systemoptionandsoonresettothestate

43
IN03/04UserManual V1.0

offactory.
Factory reset: Make all the parameters in the device reset to the state of
factory.
Reset keyboard definition: Reset the corresponding setting of keyboard
definitiontothatoffactory.
Resetbelloption: Onlyresetbelloptiontofactorystate.
Resetotherparameters:Onlyresetcommunicationoption,systemparameter
and interfaceoptionandsoontofactorystate.

Press / to move cursor to the button to be operated. Press OK to start


operation. The device will say Are you sure to execute the current operation?
Press OK toresetittofactorystateandpressESCtocanceloperation.

@ Notice: The employees information and attendance data wont be deleted


whenthisoperationisbeingdone.

4.7BellOption
Many companies need bell for onduty and offduty. Some use manual bell.
Someuseelectronicbell.Tosavecostandprovideconvenienceformanagement,we
integratebellfunctionstofingerprintsensor.Youcansettimeforbell.Whenitisthe
scheduledtime,thefingerprintsensorwillplaytheselectedringautomatically.And
theringwillstopautomaticallywhenitistheendtime.

44
4. System Option

Operation:

Press/toreadbelloption.
Press OK tosettheselectedbellandeditthebell.
Time: Thebellringsautomaticallywhenitisthespecifiedtime.
Music:Bellring
Volume: ringvolume
Times: Ringtimes
State: Whethertoenablethisbell
Ring time can be set with week as the period, namely, the bell rings
automaticallyatsometimeofsomedayinaweek.

Press / to move cursor to the input box. Press numeric key on small
keyboardtoinputthevalue.Aftersetting,pressOKdirectlytosavethesettingand
returntothelastinterface.PressESCtoexit.

45
IN03/04UserManual V1.0

4.8Other Options
Setsleeptime,externalbellandotherparametersforthedevice.
Sleep time:When it is the scheduled sleep time, the device not in operation
willentersleepstatus.Pressanykeyorfingertoawakeit.
FPimage:Selectwhethertodisplaythefingerprintimageonthescreenwhen
it is enrolling or verifying there are 4 options: display upon both enrollment and
verification, only display upon enrollment, only display upon verification, not
displayuponenrollmentandverification.
Lockpower: Topreventhostilepoweroff,select onoroff.
Lauguage:Selectthe devicelanguage.
Disable:thepowerisoff3secondsafterpressing poweroff.
Enable: itisineffectiveafterpressing poweroff.

J Notice:
1.Externalbellfunctionneedssupportofdevicehardware.
2.Onlydevicewith poweroff functionhas lockpoweroff option.
Operation:

Pressnumerickeyonsmallkeyboardtoinputthevaluetobeset.Aftersetting,
pressOKdirectlytosavethesettingandreturntothelastinterface.PressESCto
cancelthesettingandreturntothelastinterface.

46
5. Time Date

5.TimeDate

5.1 TimeDateOption

Accurateattendancetimeisbasedonaccuratetimedate.
Operation:

Press / to move cursor to the input box. Press numeric key on small
keyboardtoinputthevalue.Aftersetting,pressOKdirectlytosavethesettingand
return to the last interface. Press ESC to cancel setting and return to the last
interface.

5.2DLST
DLST,alsocalledDaylightSavingTime,isasystemtoprescribelocaltimein
order to save energy. The unified time adopted during the system date is called
DLST.Usually,thetimewillbeonehourforwardinsummer.Itcanmakepeople
sleepearlyandgetupearly.Itcanalsoreducelightingtosavepower.Inautumn,the
time will be recovered. The regulations are different in different countries. At
present,nearly110countriesadoptDLST.
TomeetthedemandofDLST,aspecialoptioncanbecustomizedonourRF
CardTime&Attendancerecorder.MakethetimeonehourforwardatXX(minute)

47
IN03/04UserManual V1.0

XX (hour) XX (day) XX (month), and make the time one hour backward at XX
(minute)XX(hour)XX(day)XX(month)ifnecessary.

J Notice: Only some models have DLST function. If you need it, please
contactourbusinessrepresentativeortechnician.
Operation:
WhenthedevicehasDLSTfunction,theoptionwillbeappearedontimedate
interface:

1) SetDLSTasenable
2)InputDLSTstarttimeandendtime.
Forexample,if08:00,April1st isset,thedeviceenterDLST,andthetimewill
beonehourforward.Ifitis08:00, August1st,thedevicewillresetnormaltime.
3) PressOKtosavesetting.PressESCtoexitwithoutsaving.

48
6. Udisk Management

6.Udisk Management

Importuserinformation,fingerprinttemplate,attendancedataandsooninthe
device to attendance software or import user information and fingerprint to other
devicesthroughUdisk.

6.1DownloadData

1.Downloadattendancedata
Saveallattendancedatainthedeviceto Udisk.
Operation
1)InsertUdiskintoUSBslotofthedevice.
2) Press /to download the Attlog.

49
IN03/04UserManual V1.0

PressOK.Downloading,waitwillappearonthedisplaywhenthedevice
isdownloadingattendancedatauntilitissuccessfullydownloaded.
3) Press ESC to return to initializing interface. Pull out U disk. The
attendance datafile, X_attlog.dat willbesavedinUdisk. (XstandsfordeviceID).
2.Downloaduserdata
SaveallusersinformationandfingerprintinthedevicetoUdisk.
Operation:
InsertUSBflashdiskintoUSBslotofthedevice,press/todownload
user,thenuser.dat(userinformation)andtemplate.dat(fingerprinttemplate)willbe
savedinUdisk.
3.DownloadSMS
SaveSMSaddedtothedevicetoUdisk.
Operation:
Insert U disk into USB slot of the device. You can press / to select
downloadSMS.Aftersuccessfuldownload,udata.datandsms.datcanbeseeninU
disk.

6.2UploadData

1. Uploaduserdata
UploaduserinformationandfingerprintsavedinUdisktodevice.

50
6. Udisk Management

Operation
InsertUdiskintoUSBslotoffingerprintsensor.Press/toselect upload
user data, and then press OK, and user.dat (user information) and template.dat
(fingerprinttemplate)inUdiskwillbeuploadedtothedevice.Iftherearenosuch
files,datacopyerrorwillappear.
2.UploadSMS
UploadSMSinUdisktothedevice.
Operation
InsertUdiskintoUSBslotofthedevice.Press/toselectuploadSMS
andthenpress OK.Udata.datandsms.datwillbeuploadedtothedevice.
3.Uploaduserdefinedpicture
UploadJPGpicturestartedwith ad_inUdisktothedevice.Thenthispicture
willbedisplayedontheinitializinginterface(PleaserefertoAppendix1Common
Operations).
Operation:

InsertUdiskintoUSBslotofdevice.Press/topreviewthepicturesof
U disk. If you want to upload the picture, click OK. Then the next picture will
appearautomatically.Afterupload,press ESC toexit.

51
7. Auto Test

7.Auto Test

Thedevicecantestvariousmodulesautomaticallytohelpoperatortojudgethe
modulewithfaultquickly.Autotestinclude TFTdisplayTest,AudioTest,Keyboard
Test,SensorTestandRTCTest.

Press /toselecttheitemtobeselected.Press OK tostartit.


Ifyouelect AllTest,thedevicewillperformallthetestbelow.

7.1TFT Display Test


The device can automatically test TFT color display effect through color
display,whitedisplayandblackdisplay)toseewhetherthescreenworksnormally.
Press OK tocontinueandpress ESC toexit.

7.2 Audio Test


The device can automatically test voice prompt effect through playing voice
filesinthedevicetoseewhetherthefilesarecompleteandthevoiceeffectaregood
ornot.
Press OK tocontinueandpress ESC toexit.

7.3Keyboard Test
The device can automatically test various keyboards to see whether the keys

52
7. Auto Test

worknormallyornot.
Press any keyboard on thetestinterface (exceptfor OK and ESC) tocheck
whetherthepressedkeyboardisinaccordancewiththatdisplayedonthescreen.
Willappearwhetheritistherightkey,and willappearwhetheritis
nottherightkey.
PressESC toexit.

7.4Sensor Test
Thedevicewillautomaticallytestthesensortoseewhetheritworksnormally.
Pressfingerprinttoseewhethertheimageisclearanduseable.
Pressfingerprintonthesensorwindowandthefingerprintimagewillappearon
thescreen.
PressESC toexit.

7.5Realtime Clock Test


Thedevicecanautomaticallytesttheclocktoseewhetheritworksnormally.
Press OK tostarttimeandthenpress OK tostoptime.
PressESC toexit.

53
8. Query record

8.Queryrecord
Employees attendance records will be saved in the device. For convenience,
queryrecordfunctionisprovided.
Accordingtousersinputquerycondition,therecordwillbedisplayedonthe
screenforusertocheck.
Enter query attendance, input corresponding information in the query
conditioninputbox.

1) WhentheUserIDisblank,allemployeesare inquired.
2) When input a User ID, only this employees attendance record can be
queried.
Afterquery,therecordsinaccordancewiththeconditionswillbedisplayedon
thescreen:

54
8. Query record

Press/ to move the cursorto the line to be queried. AndpressOKto


checkattendancerecord.
For example, the detailed attendance information of employee 10001 on
May8thasfollows:

Atthebottomofthescreen,therearesomeremark,andthecapitalletterswith
theirmeanings:
Verification:
F:meansFingerprint verification
P:meansPasswordverification
C:meansIDcardverification
Status:
Itistheattendancestatus.Thecodedisplayedinthelististhestatuscode.And
statusnamewillbedisplayedintheinformationcolumn.

55
9. System Information

9.System Information

Usesysteminformationtocheckthecurrentdevicessavingstatus,itsversion
informationandsoon.

9.1RecordCapacity
Display the count of enrolled users, administrator, password enrollment, the
currentenrolledfingerprintandthecurrentsavedattendancerecord. Alsodisplay the
capacityofthefingerprintand attendancerecord,asshowbelow:

9.2DeviceInformation
Display device name, serial number, version information, and vendor and
manufacturedateindeviceinformationforcheck.

56
Appendix1.CommonOperations

Appendix1.CommonOperations

1.Keyboard

Different device has different kinds of keyboard, and the function of the
keyboardisdifferent.Pleasecheckthefallows:

key function
Numeric 1.09,usedtoinputemployeenumber,passwordandsoon.
key 2.0on manageuser interfaceis shortcut ofqueryuser.
1. Upward.
2. Statuskey.
1. Downward.
2. Statuskey.
1. Modifycurrentitemvalue.
2. Statuskey.
/ 1. Poweroff. Press it on the initializing interface for 3 seconds to
enterpoweroffcountdownstate.
2.Spaceback.PressitwhenUserID,passwordandsystem valueare
input incorrectly to delete the wrong value and input the value
again.
3. Statuskey.
M/OK Menu, OK
ESC 1.Canceltheoperationandreturntothesuperiormenu
2. Press ESC on the initializing interface to display the keyboard
definitionofthepresentdevice.

57
IN03/04UserManual V1.0

2.USB
Thedevicewillbeusedas USBHost toexchangedatawithexternalUdisk.
Thedata transmission speedis quick, thetraditional fingerprint machine only
supportstheRS232,RS485orEthernetwaydatatransmission,whenasaresultof
physicalconditionlimit,dataquantitybig,andthedatatransmissioncostquitelong
time.ButtheUSBdatatransmissionismorequickthantheformeranytransmission
mode,maycompletedownloadingdatabyUdiskinashortperiodoftime,likethis
greatlyenhancestheefficiency.
TheoperationalstepsofthedeviceasUSBHostpleaserefertothemanual"6.
Udiskmanagement"detailedbriefing.

3. TimeRing
Inmanyfactories,ringingapplytobroadcastmessagetoinformemployeetheir
duty are on or off, and the traditional way is to ring bell by manual or special
electron machine. We have already embedded the time ring module into the
fingerprint T&A system, you may benefit from the low cost and convenience
management.TherearemoretwooptionsthatisBellscheduleandBelldurationin
the device bell ring provide with. The system total has eight Bell schedule to set,
accordingtoactualneedyoumaysettimebell,whenthetimearriveattheappointed
time,thedevicewillautomaticallyringbell,thedurationofringingachieveassigned
hour,theringingwillstopautomatically.

4. T9InputMethod
ThenameofT9inputmethodisthesmartinputmethoditisfamousforhighly
effective and quickly inputting the character, this equipment fully supports the T9
Chinese, the T9 English, and the symbol input. There are three or four English
letters on 0 ~ 9 numeric keyboards of the machine, for example the numeric
keyboard1hastheA,B,theCthreeletters,onlyinputkeywherethisletterlocate
fortheT9Chinese,Pressthealgorithmoftheprogramwillautomaticallycombine

58
Appendix1.CommonOperations

thelegitimatePinyin.ThenpressthenumerickeytochoosePinyinforinputtingthe
Chinese character. The T9 English also comply with the letter arrangement of
English word to input, only press key which inputs this letter, the program
automaticallydisplaythiskeyexpressedallletters,pressthenumerickeytoselect
letter. The T9 input method also may input some marks.May inputthe name,the
shortmessagecontentthroughtheT9inputmethoduserisabletoinputthename,
theshortmessagecontent.
T9Chinesecharacterinput(takeAngelforexample):
Press to enter T9 input. And press to shift input method of Pinyin,
EnglishandSymbol,and thenselect English.

Input 2 to get the first


letterandpress 3 to A.

Press OK

Use the same methodtoinput


theotherletters ngel.

PressESC toexit

59
IN03/04UserManual V1.0

5.Query Record

It is used for common user to query his intraday attendance record to see
whetherthereissomething wrong for attendancetimeand notify administratorthe
abnormalrecorderintime.
Operation:
Press OK to display the employees intraday records after successful
fingerprintorpasswordverificationin10minutes.
Forexample: theemployeewithUserIDof1cancheckhisintradayattendance
recordbypressing OK afterfingerprintverification.

Press/toreadattendancerecord.
Press OK toquerydetailedinformation.
PressESC toreturntoinitialinterface.

6.PropagandaPictureUpload

Therulesof propagandapicturesupload:
1. ThepictureformatmustbeJPG.Otherformatsarenotacceptedhere.
2. The file name of propaganda picture must be ad_0ad_9, for example
ad_1.Jpg.
3. The file name wont be changed after it is uploaded to the device. If it is

60
Appendix1.CommonOperations

necessarytochangethispicture,uploadanotherpicturewiththesamefilenameto
coverit.
4. Everypicturecannotbeover20K, oritcannotbeuploaded.
5.Thepicturesresolutionis400wideand240high.Itisbetternottobemore
orlessthanit.
6. Thepropagandapicturescountshouldbe10atmost.

7.PrintFunction

Explain
This function is designed for a serial port printer only, the parallel printer is
unavailable. The printing content output via RS232. After a user is verified, the
resultwillbesent outthroughserialport.Ifdeviceconnectwiththeprintertheresult
canbeprinteddirectly,canalsousetheSuperTerminalto viewtheoutputcontent.

Deviceconnectwithprinter: Device printer


2TXD <> 3RXD
3RXD <> 2TXD
5GND <>7FG
RS232 Pinlineorder:

Connection

61
IN03/04UserManual V1.0

Instructions
1.Inthedevicemenu,pressMenuCommRS232/485andselectbaud
rateas 19200.
2.Inthedevicemenu,enter Menu Comm.Security andselecttheprint
mode.Thereare7printmodestochoose.

J Note:
1. It will print garbled information or cant print when baud is selecting not
119200.
2.When print modeis mode 5, it will prompt as the follows afterattendance
verification.

62
Appendix1.CommonOperations

Press OK toprintattloginmode5. PressCanceltonotprintattlog.


Forexample:Sanpunched thecardat13:24:55onSeptember1,2009,thereare
differentprintformatstoselect,shownasbelow:
Version1
00001 San 09/09/01 132455 I
Version2
User No00001
DateTime CheckIn
09/09/01 132455
Version3
San 00001 09/09/01 132455
Version4
BreakIn
152455 01/09/2009
00001
Version5
00001 09.09.01 132455 CheckIn
Version6
00001
Date CheckIn
09.09.01 132455
Version7
UserID: 00001
CheckIn
09.09.01 132455

Note:
1. Besurethat the fingerprint machineand printer(Super Terminal) have the
samebaudrate.

63
IN03/04UserManual V1.0

2. If your need this function, please contact our business representative or


technician.

8.ImportShortMessage
Our some product provide a function which can send a message to assigned
personthroughpublictopersonway,Weonlyneedusethebackendsoftwaretoset
it,thenuploadittothefingerprintmachine,,aslongastheattendancedivestartthe
forpublicshortmessagewillbeseenonmachinescreen,anditwillshowforever,
forapersonshortmessagewillnotdisplayuntiltheusersfingerprintverificationis
positive, Thus reduces the work load to manager the human power , greatly
enhancestheworkingefficiency.
Sendamessagetoaassignedpersonal,ifastaff sbirthdayisonOctober20,
wemaysetbackendsoftwaretosendoutashortmessagetohimwishyourHappy
Birthday on 20 October , uploaditinthe machine, afterthisstaff the fingerprint
verifysuccessfullyonthatday,thismessagewilldisplayonthescreen
Sendamessagetopublic,ifentirecompanyneedstohaveameetonJune19,
after weset backend software to uploadthe machine,upon thisday, the message
holds XX meet in XX room will continuously display on the screen, asks
everybody (certainly suchinformation you areallowed to revise according to your
need)toXXparticipation
Short message function settingafter setting Short message in the Time&
Attendancesoftware,thenuploadittofingerprintmachine,thefingerprintmachine
support two kind of way to importthe short message, whichthesoftware connect
withfingerprintmachinetoimportitdirectly,otherwaybyUflashdisk.
OperationStepasfollow
1.ThroughTime&Attendancesoftwareexternalprogram>shortmessage
management complete to set short message, then connect with the fingerprint
machine and upload it, 2. through Time & Attendance software external
program> short message management complete to set short message, choose

64
Appendix1.CommonOperations

externalprogram>Uflashdiskmanage>exportshortmessage>exportto
U disk, after exporting successfully,plug the U disk into the fingerprint machine,
press key of the fingerprint machine> Pendri Mng> Upload short
message.
ShortmessagefunctioneffectForpublicshortmessagewillbeseenandit
willshow foreverafter thisstaff the fingerprint verify successfully ,this message
willdisplayonthescreen.
Note:thereistotal1024itemsofpublicforpersonalshortmessage.

9.CardSupport(ID,EMandMifareCard)
In order to meet security market need, our fingerprint biometric verification
readercanbeembeddedEMandMifarereadermodule.
Using 125MHZ, 13.56 MHz contactless smart card technology, these
fingerprint products provide users with new options for supporting
multiauthentication of identity. Combine a contactless card presentation with a
fingerprintbiometric.Or,useapersonalidentificationnumber(PIN)numberalong
withacontactlesscardpresentation.(Seemultiauthentication).
Thefingerprintproductsprovidethreelevelsoffingerprintverification.During
theenrollmentprocess,theLCDpromptwillguidetheusertoplacetheirfingeron
the sensor. The fingerprint template is collected at the unit and immediately
transferred to the card. During this enrollment process, the fingerprint template is
storedonthecardorthefingerprintmachine.
During verification atthe door, the LCD graphicaldisplay will assistthe user
withinstructionsaboutfingerplacementonthebiometricsensor.
FormoredetailseeEM,MifareCarduserGuide.

10.14Digits Code
Whengoonenrollinguserinthefingerprintmachine,alongwiththestandard
enrollingcodeis9digits.

65
IN03/04UserManual V1.0

If youneedthattheenrollingcodeislongerintheactualapplication,wecan
provideacustomizeddesignthatthefingerprintmachineown14digitscode .
When you use 14 digits code to enroll user, you can preset some digit as
certain flag. For example, set the first 3 digits as the branch company code, the
second3digits asthedepartmentcode,theothersastheindividualstaffnumber.

J Note:Onlysometypesofdeviceshavethisfunction.If youneedit,please
contactourbusinessrepresentativeortechnician.

11.DaylightSavingTime

Some device provides correct and current time in any world time period,
countryormajorcity.AccurateadjustmentsforDaylightSavingTime(orSummer
Time) are made according to each location's rules and laws. No matter what time
periodacountryorcityislocatedin,thisisyourtopchoiceforaclockresourcesite.
This function can be set in the fingerprint machine option, Press Manu key,
entertheoption>datetime. IntheXXMonthXXDateXXminutemoveforward
anhour,andthatintheXXMonthXXDate,XXMinutemoveBackanhour.
Theoperationreferstothismanual 5.2 DLST.

12.BackupBattery

This device is equipped with 7.4V/2000mAh backup battery and removable.


Whenthebatteryvoltageistoolow,the devicewillautomaticallyshutdown.
Thebackupbatterychargingtimeisabout3.5hours.Thestandbytimeisabout
6hours(It isdecidebyusing conditionandobjectivefactors).

NOTE:Duringremovingthebattery,besuretodisconnecttheexternalpower
supply.

66
Appendix1.CommonOperations

13.PhotoIDFunction
SomedevicessupportPhotoIDfunction,whichcandisplayuserphotosavedin
UdiskonthescreenaswellasUserID,nameandsoonafterverification.
Operation:
1.IfthedevicehasnoSDcard,theoperatingstepsareasthefollowing:
1)CreateafoldernamedphotoinUdiskandstoreusersphotoinit.
2)ThephotoformatmustbeJPGandfilenamemustbeUserID.Forexample,
thenameofphotoofuserwhoseUserIDis154mustbe154.jpg.
3)InsertUdiskintoUSBslotoffingerprintsensor,andthephotowillappear
afterverification.

Notice:
1) Thenameofuserphotomustnotbeover8digits.
2) Whenuserisverifying,Udiskmustbeinsertedintothedeviceallalong.
2.IfthedevicehasSDcard,theoperatingstepsareasthefollowing:
1)CreateafoldernamedphotoinUdiskandstoreusersphotoinit.
2)ThephotoformatmustbeJPGandfilenamemustbeUserID.Forexample,
thenameofphotoofuserwhoseUserIDis154mustbe154.jpg.
3)InsertUdiskintoUSBslotoffingerprintsensor,enterUdiskmanagement>

67
IN03/04UserManual V1.0

uploaddata>uploaduserphoto.Theoperationisthesamewiththatof6.6upload
userdefinedpicture.
4) Enter U disk management>download>download user photo,and a folder
named photo will be created automatically in U disk. Downloaded user photos are
allsavedinthisfolder.

14ConnectC1Controller

WhenthedeviceconnectswithC1Controller,theycanexecutesimpleaccess
controlfunction.
The device can use C1 Controller asthepowersupply. At the sametime, the
deviceconnectswithelectriclockthroughC1Controller.Itenhancesthesecurityof
system. When the fingerprint verified, the Controller output the control signal to
unlock the door. In this situation, the device is only a reader to read and write of
fingerprints,cards,passwordetc.
The electric lock in use of this situation, we recommend its power is under
350mA/12V inlockstate.

Note: Onlysome types of devices havethis function. If you need it, please
contactourbusinessrepresentativeortechnician.

15.WebServer

Summary:
The T & A system is based on Web Server technical, use Page Request
technicaltoprocessandmanagedata,it integrate manyfeature,such localdata
collection,intellectualizedport(RS232/RS485),communicationprotocolconversion,
image collection, alarm data stored up , and WEB server etc. basing on this
equipment to create an unifying monitoring platform that supply one solution for
equipment management, Time &Attendance, as well as monitor, in addition the

68
Appendix1.CommonOperations

WebTime&Attendancesolutionisindependentonregionallimit,anddonotneed
to install other software. utilize IE or Netscape browser, downloading and remote
online management, handle time sheet corrections and create report table on the
fingerprintterminalisavailable,itsupplyeasywayformanagerofenterpriseknow
theemployinpostorattendancestateatanymoment,intimesearchforinformation,
statistic data, deal with operation at same time, provide a solution of staff
attendance , checkin or out management, pay roll management,in word and deed
realizethatateverywhereanymomenttheinformationissynchronization,itsgofar
beyondtraditionalTime&Attendancesolution.

WhydoesembeddedWebServerintothedevice?

1. A fewornobodykeepwatch
Thought TCP/IP and Ethernet, WEB Server is able to reliable apply to local
network, the data fingerprint machine store up can be watch and deal via long
distance networkwithbrowseritis notneedto administrator or personspecially
assigned go to local fortoachieve task collect data, upload and download data,as
wellasupgradesystem,,nothaveothersoftwareandtools
2.Fully compatiblewithourcompanyIncprogram
WEBServerplatformmaybefullycompatiblewithcurrentprogrameachother
entirelyismutuallybeneficial,abilitytomuchmoreflexibletomeetcustomerneed.
3.Morereliable,fastthroughlongdistancetransfer data
ThroughWEBSERVERthedataisabletoreliableandfastbedownloadlocal
system,utilizebrowseabilitytodownalldatainshorttime,donotworryaboutthe
reliabilityofdata.
4.Moreflexible,easyfordatamanagementandsourceshare
Via the platform created by Web server, the application program, data
managementbecomesmoreeasyandflexible.
5.MayeasyintegrateOA,CRMsystem,reliablebaseonnetworkhumanforce
management.

69
IN03/04UserManual V1.0

Note: Only some types of devices have this function. If you need it, please
contactourbusinessrepresentativeortechnician.

70
Appendix2. About the HumanRights Privacy Statement

Appendix2.AbouttheHumanRightsPrivacyStatement

Dearcustomer
FirstthankyouforusingMultibiometricidentificationproductwedesignand
produce. As one of the global famous fingerprint identification core technology
provider, we are ceasinglessly carrying on the development and research, also we
believesuchactionisnecessaryto:(a)complywiththelaworlegalprocessserved
on Our company (b) protect and defend the rights or property of Our company
(includingtheenforcementofouragreements)or(c)begovernedbyrelatedlawor
legalthatinvolvetothehumanrightsandtheprivacyineachcountry.
Wearecommittedtoprotectingyourprivacy.
Westateasfollows:
1. Our civil fingerprints identification equipment merely captures fingerprint
featurespoint,butnotthefingerprintimage,doesnotinvolveandretainprivacy.
2. The fingerprint features points are not to be recovered the primitive
fingerprintimage,willnot involvetheprivacy.
3.Wetookanequipmentprovider,innoeventshallweareliableforanydirect
or the indirect against legal behavior arising out of use or inability use our
equipment.
4. If you have the different dispute for close the human rights or the privacy
arisingoutofusingourequipment,pleasedirectlycontactswithyouremployer.Our
other the police fingerprint equipment or the development kit provide with the
functionthat ability to capture citizen's fingerprint primitiveimage, as for whether
will constitute the right infringement to you, please contact with the local
governmentortheequipmentfinalproviderastheequipmentoriginalproducer,we
havenotanylegalliabilityforanydamageitcause.
Note: There are limited rights to privacy and human rights in the Chinese

71
IN03/04UserManual V1.0

Constitution.
ThepersonaldignityofcitizensofthePeople'sRepublicofChinaisinviolable
andfurther,thatinsult,libel,falseaccusationorfalseincriminationdirectedagainst
citizensbyanymeansisprohibited,theprotectionoffreedomofthepersonandthe
residence.TheConstitutionprovidesforthefreedomandprivacyofcorrespondence
ofthecitizen.
Finally we hereby stressed that once again, as one kind of advanced
identification technology the fingerprint identification will apply to electronic
commerce,bank,insurance,lawserviceindustryinthefuture,everyyear,allworld
causefromthelackofsecuritypassword,thehumanityaresufferingtheheavyloss.
Inunderhighsafeandsecureenvironmentthefingerprintidentificationprotectyour
statusfromdamageinfact.

72
Appendix3.Environmental Protection

Appendix3.Environmental Protection

The environmental protection use period marked on our products is the


safety period of our products used under the conditions specified bythis
manualwithouttoxicandharmfulsubstancesleakinghappened
Theenvironmentalprotectionuseperiodmarkedonourproductsdoesnot
include the easy wear and tear components required to be replaced
regularlysuchasthebatteryetc.Thebatterysenvironmentalprotectionuse
periodis5years.
Thetoxicandharmfulsubstancesorelementnames
andthecontenttable
Thetoxicandharmfulsubstancesorelements
Lea Mer Cadmi Hexavalent Polybromin Polybromina
Partname
d cury um Chromium ated ted diphenyl
(Pb) (Hg (Cd) (Cr6+) biphenyls ethers
) (PBB) (PBDE)
SMDresistor
SMD
capacitor
SMD
inductance
SMDdiode
ESD
components
Buzzer
Adapter
Screw

73
IN03/04UserManual V1.0

Indicate that the content of the toxic and harmful substance contained in all
homogeneousmaterialsofthispartisinthelimitationrequirementstipulatedinSJ/
T113632006.
Indicatethecontentofthetoxicandharmfulsubstancecontainedinatleastone
homogeneousmaterialofthispartisbeyondthelimitationrequirementstipulatedin
SJ/T113632006.
Note: The80%producthasadoptedthe manufacture with nontoxic andharmless
environmental protection materials, the nontoxic and harmless substances or
elementsinsteadofthetoxicandharmfulsubstancesorelementscontainedcannot
beachievedbecauseofthecurrenttechnologyandeconomicconstraints.

74

Das könnte Ihnen auch gefallen