Beruflich Dokumente
Kultur Dokumente
Fixit Fastflex
WATER PROOFING
H i g h p e r f o r m a n c e P o ly m e r m o d i f i e d
C e m e n t i t i o u s C o at i n g
Description
a two component cementitious coating, composed of high quality cement, properly selected & graded fillers,
additives and liquid polymer. It is suitable for achieving waterproofing for the water retaining structures such
as swimming pools, water tanks, reservoirs, other wet areas, etc, because it provides strong bonding, good
waterproofing and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating
Areas of Application
}} Any concrete, cement or masonry surface that is subjected to damage from moisture.
}}Swimming pools, water tanks and reservoirs.
}}Bathrooms, toilets, sunken portions, balconies, planters, etc.
Method of Application
1 S U R FAC E P R E PA R AT I O N
}}Surface under treatment should be sound, clean and free from dirt, oil and other loose material
}}Masonry surfaces should be fully cured (minimum 28 days) prior to application.
}}All surface cracks, undulations and voids must be repaired appropriately before application
}}Surface must be in SSD condition prior to application.
2 M i x in g
}}Use slow speed mechanical mixer, add powder component slowly to the polymer in a clean container
}}Stir till smooth and homogeneous slurry, without any lumps, is achieved
}}Allow the mixed slurry to stand for 5-10 minutes for releasing trapped air during mixing.
3 A P P L I C AT I O N
}}Do not dilute with water
}}Apply Dr. Fixit Fastflex slurry by brush, roller or trowel.
}}Allow the 1st coat to dry completely for 6-8 hrs before applying 2nd coat.
}}Apply 2nd coat in perpendicular direction to the 1st coat
}}If applied in wet areas, overlay of screed must be done with 24-45 hrs.
113-29/07/13
41
WATER PROOFING
Dr. Fixit Fastflex needs atleast 7 days for water or moisture curing. Cure with help of moist hessian cloth.
}}
Do not cure by flooding with water or conduct any ponding test before it gets completely cured.
}}
113 Dr. Fixit Fastflex
Concrete & masonry surfaces must be cured for 28 days before application.
}}
Overlay of a cementitious screed must be done with 24 to 48 hrs. if applied in wet areas & bathrooms.
}}
Technical Information
Packing
Pidilite Industries Limited DISCLAIMER The product information & application details given by the company
Construction Chemicals Division & its agents has been provided in good faith & meant to serve only as a general
Ramkrishna Mandir Road, Post Box No. 17411 guideline during usage. Users are advised to carry out tests & take trials to ensure on
the suitability of products meeting their requirement prior to full scale usage of our
Andheri (E) Mumbai 400059 INDIA
products. Since the correct identification of the problems, quality of other materials
Tel +91-22-2835 7000 Fax +91-22-2835 7008
used and the on-site workmanship are factors beyond our control, there are no
www.doctor-fixit.com drfixitadvice@pilmail.com expressed or implied guarantee / warranty as to the results obtained. The company
Dr. Fixit Advice Centre (Toll Free No.) 1800-209-5504 does not assume any liability or consequential damage for unsatisfactory results,
43