Beruflich Dokumente
Kultur Dokumente
Instructions to candidates
Answer ANY FIVE full questions.
Missing data may be suitably assumed.
1A. It is required to have a 1 MB SRAM. Show the complete architecture of the
memory. Also show how each block can be implemented.
1B. In a CMOS inverter, both NMOS & PMOS transistors have W=2.0m, L=0.5m,
2
process parameters k = 110 A/V, and VDD & Vth are 2.2 V and 0.6V
respectively. Calculate the inverter pair delay. Assume that the sheet resistance of
N+ diffusion channel is 10kOhm and the electron mobility is 270 cm2/V-s. (5+5)
2A. With the help of neat diagrams explain the fabrication of NMOS transistor
2B. What is latch up in CMOS? What are its sources? Explain.
2C. Draw the circuit of a 2 input NOR gate using only 2 transistors. (5+3+2)
3A. 2-input CMOS NAND and NOR gates have been designed with feature sized
transistors and if Cg = 5fF, Cout = 20fF & Rs = 2k,
i) Calculate the worst-case rise and fall times for this NAND gate.
ii) Calculate the best-case rise time for this NAND gate.
3B. Show the complete circuit of a 4 X 4 NOR based ROM (including the appropriate
decoder) to store data values of 3, 5, 10 and 6. What are its merits and demerits?
(5+5)
4A. Explain how large capacitive loads can be driven using cascaded inverters. Derive
the necessary expressions.
4B. With the help of a neat circuit diagram explain BiCMOS inverter. What are its
merits and demerits? Show how you can implement 2 input NAND and NOR gates
using BiCMOS logic. (5+5)
6A. Explain the read and write operations in a 6T SRAM with suitable circuit. Also,
discuss the design criteria and estimate the Cell Ratio and Pull up ratio.
6B. Explain the following with the help of suitable circuits: (5+5)
i) Decoders of memory arrays
ii) Sense amplifier
******