Beruflich Dokumente
Kultur Dokumente
User experience testing is a hot topic for mobile device vendors and network operators.
The R&SCMW500 - Production Test supports engineers to optimize the performance and user experience of their mobile designs in different fields and market segments. The achievable data rate of a mobile device is a basic
but important feature and is determined by the capacity of the interfaces involved.
To discover possible throughput and performance limitations between the application server and the mobile device the R&SCMW500 - Production Test provides fully integrated and optimized servers together with throughput
monitors, performance analysis and message analyzing tools. Acting as gateway to the internet, the R&SCMW500 - Production Test can monitor the communication channels to the internet used by applications by the powerful
IP analysis and protocol statistic measurement and makes application testing fast and easy.
Rohde & Schwarz offers a compact solution for reproducible end-to-end functional and standard-compliant conformance testing of eCall and ERA-GLONASS In Vehicle Systems (IVSs). The R&SCMW-KA094 eCall application
software and the R&SCMW-KA095 extension for ERA-GLONASS simulate public safety answering points (PSAP) and remotely control the R&S CMW500 - Production Test to simulate a cellular network in the lab. They also
control the R&SSMBV100A vector signal generator, which provides the GNSS coordinates required by the IVS to compile the MSD.
To verify whether the IVS modules are in line with the applicable standards, tests like MSD transmission timing, MSD decoding including GNSS position and, in the case of ERA-GLONASS, MSD transmission triggering via SMS
are supported. To simplify conformance tests, the R&SCMW-KT110 CMWrun sequencer software tool is added. It provides ready-to-use test sequences for eCall and ERA-GLONASS modules in line with CEN and Russian
GOST-R specifications.
VoLTE, VoWLAN and WLAN traffic offload testing with the R&SCMW500 - Production Test
The R&SCMW500 - Production Test wideband radio communication tester comes with everything needed for testing VoLTE, VoWLAN and WLAN traffic offload functions on consumer devices. On the Data Application Unit, the
tester provides all access technologies and all necessary servers, such as an ePDG and an IMS server.
It tests the handover between LTE and WLAN as well as single radio voice call continuity (SRVCC), i.e. the handover between LTE and legacy networks such as GSM and UMTS.
The R&SA-GNSS and eCall/ERA-Glonass option is ideal for testing the A-GNSS based position location performance of a mobile phone using customer-defined scenarios. It provides detailed numeric, statistical and graphical
analysis of the accuracy of the calculated position as well as visual representation on a map.
The test software for A-GNSS is a PC-based application which connects to the R&SSMBV100A signal generator and an R&SCMW500 - Production Test radio communication tester in order to perform Assisted GNSS (A-
GNSS) tests.
POLQA and PESQ Speech Quality Tests using R&SCMW500 - Production Test
POLQA and PESQ are objective perceptual speech test methods. A speech test method rates the quality of a speech signal as opposed to a conversational rating where impairments such as round-trip delay are judged for
their impact on a conversation. A perceptual test method assesses degradations in the same way as human beings would. Non-perceptual test methods usually determine physical entities like voltage level.
The R&SCMW500 - Production Test wideband communication tester and the R&SUPV audio tester are the perfect team for manually or fully automatically measuring legacy and VoLTE PESQ and POLQA speech quality. A
ready-to-use test sequence for the R&SCMWrun sequencer software tool makes testing fast and easy.
can be tested. The new virtual subscriber concept allows users to create multiple virtual remote stations that have different characteristics and functionalities. This approach enables users to verify a variety of scenarios such as
codecs, error rates, etc. quickly and effectively. Also interoperability testing of real phones with different hardware or firmware versions are possible.
Assuring the quality of video/audio characteristics, such as timing, buffer models and synchronization between video and audio the R&SCMW500 Data Application Unit is the ideal platform for verification of streaming
performance of a mobile device to ensure that the user experience and the expected quality of product is delivered to the end user. You can use the web portal of the DAU to test video streaming with your mobile under test
using different access technologies provided with the R&SCMW500. In addition, the channel can be modified via IP impairments or through fading scenarios. This allows real test conditions in a fully controlled environment. This
is the perfect base for extensive video performance test scenarios focusing on video quality or battery consumption when a video is streamed to the device under test.
Increase the IP connection security of mobile and IoT device vendors or car telematics units
R&SCMW500 wideband radio communication tester, equipped with the R&SCMW-KM052 analysis option, enables mobile and IoT device vendors or car telematics unit vendors for the first time to improve the security of IP-
based data communication in an early stage of the development. Equipped with the new reporting module the CMW500 performs an analysis of the IP traffic in real-time in a controlled test environment. The R&SCMW500
emulates a controlled mobile network or a WLAN access point and users receive a detailed overview of security-related parameters. Developers can detect and close security gaps at an early stage of the development process.
The 3GPP TS 36.521-1 Radio transmission and reception LTE User Equipment (UE) conformance specification defines the measurement procedures for LTE terminals with regard to their transmitting characteristics, receiving
characteristics and performance requirements as part of the 3G Long Term Evolution (3G LTE) standard. This application note describes how to use the LTE Frequency Division Duplex (FDD) and Time Division Duplex (TDD)
measurement functionality provided by the R&SCMW500 wideband radio communication tester to perform LTE transmitter and receiver measurements according to this test specification.