0 Bewertungen0% fanden dieses Dokument nützlich (0 Abstimmungen)
5 Ansichten1 Seite
Sensors are installed on rails on either side of an unmanned railway crossing gate to detect approaching trains. When a train triggers the first sensor, a buzzer sounds and the gate lowers. It remains lowered until the train passes the second sensor, at which point the gate opens and the pedestrian bridge gate closes to allow vehicle traffic to pass safely. The dual sensor system prevents accidents by detecting trains from both directions.
Sensors are installed on rails on either side of an unmanned railway crossing gate to detect approaching trains. When a train triggers the first sensor, a buzzer sounds and the gate lowers. It remains lowered until the train passes the second sensor, at which point the gate opens and the pedestrian bridge gate closes to allow vehicle traffic to pass safely. The dual sensor system prevents accidents by detecting trains from both directions.
Sensors are installed on rails on either side of an unmanned railway crossing gate to detect approaching trains. When a train triggers the first sensor, a buzzer sounds and the gate lowers. It remains lowered until the train passes the second sensor, at which point the gate opens and the pedestrian bridge gate closes to allow vehicle traffic to pass safely. The dual sensor system prevents accidents by detecting trains from both directions.
The main objective of this project is to improve the working of unmanned
Railway level crossing and to also prevent accidents. To achieve the objective, sensors are installed on rails on either side of the gate. There are two sensors used on either side. When the train crosses the first sensor, buzzer will buzz. Now, the controller directs the servomotor to lower the gate by few degrees from the vertical position and wait still the train crosses. Then, at the same time there is another gate that is used for people to cross. The pedestrian bridge gate will then open (i.e.) if the railway gate is closed the pedestrian bridge gate will open. When the train has crossed, the sensor at the other end of the gate will sense this and the gate gets opened for the vehicles to go. At that point of time the pedestrian gate will close. Since there are two sensors which are present at two ends of the gate so, it will the sense the arrival of train from both sides. This will not only help in preventing accidents but also in safe crossing of people who travel by walk.