Sie sind auf Seite 1von 2

WORK REPORT

ZR - MTNE LOCATION WORKSHOP


WORK SUMMARY.

PREPERATION OF LIGHT FITTING FOR SHUTDOWN JOB

03/07/2017

1. 8 Roles 24 Volt extension cable tested ok and provided insulation for protect the plug & Socket.

Replaced one no socket.

Replaced one no plug.

2. 24 Volt hand lamp with extension cable 4 No's checked ok. During testing found one lamp problem and one cable gland replaced,
because insulation damaged near cable gland.

04/07/2017

1. 24 volt inspection lamp check 8 No's checked ok. During testing one bulb replaced and one fitting wire re termination.

2. 220 volt hand lamp (Gray) 3 No's checked ok. During testing one bulb replaced.

3. 24 volt hand lamp 8 No's checked ok. During testing cable (two meter each fitting) with gland replaced for 3 fittings, and plug
replaced for two fittings.

4. 220 Volt aluminum bench 2 No's was tested ok.

05/07/2017

1. 6 roles 24 Volt extension cable tested ok.

2. 220 Volt Hand lamp (Gray) 7 No's checked ok. During testing found cable damaged in one light fitting. Replaced 15 meters new
cable.

3. 220 Volt flood light (yellow) 7 No's checked ok. During testing found cable damaged in one light fitting. Replaced 25 meters new
cable and one fitting bulb replaced.

4. 24 volt hand lamp 3 No's checked ok.

5. 24 Volt Aluminum bench 2 No's checked ok.

06/07/2017

1. 220 Volt flood light (yellow) 5 No's checked ok. During testing one fitting bulb, Capacitor and cable gland replaced.

2. 220 Volt aluminum bench 1 No's checked ok.

3. 24 volt hand lamp 8 No's checked ok. During testing found 2 fitting not working, lamp replaced. One fitting cable replaced and two
fitting plug replaced.

4. 24 Volt hand lamp with cable 1 No tested ok.

PERFORMER ENGINEER
WORK STARTED WORK COMPLETED
NAME:

03/07/2017 10/07/2017 SIG : SIG :


WORK REPORT

LOCATION WORKSHOP
WORK SUMMARY.

PREPERATION OF LIGHT FITTING FOR SHUTDOWN JOB

09/07/2017

1. 4 roles 24 Volt extension cable tested ok. During testing found 1 socket damage, replaced new one.

2. 220 Volt Hand lamp (Gray) 10 No's checked ok. During testing two fitting bulb replaced and 6 fitting cable gland replaced.

3. 220 Volt bench with stand 2 No's checked ok.

4. 24 Volt hand lamp with extension cable 1 No's checked ok. During testing found metal plug damage. Replaced new one.

10/07/2017

1. 220 Volt flood light (yellow) 25 No's checked ok. During testing two fittings having plug damaged. Replaced new plug.

All the light fittings are kept in wooden ballet with proper tie. And also all plug and socket provided proper protection.

PERFORMER ENGINEER
WORK STARTED WORK COMPLETED
NAME:

03/07/2017 10/07/2017 SIG : SIG :

Das könnte Ihnen auch gefallen