Beruflich Dokumente
Kultur Dokumente
Contents
Basic introduction
2 ANT-M NodeB-F
AISG Cable between
3 RCU and ASBT;
RCU AISG-F
F M
5
NodeB-F ANT-M
F
7
AISG-M
OR R8881
6 OR
Proprietary Confidential
1 1
2 3 2
Comba
1
7 3 4
ANDREW 8
6 3
4
7
5 2 1
Comba
8
ANDREW
AISG cables
Standard AISG cable has two ports: Port A is male and Port B is female. Port
A connects ASBT or RCU and Port B connects to RCU.
Note: If the standard cable is not longer enough, it can be extended.
Special AISG cable has two ports: Port A is DB9 and Port B is AISG female.
Port A connects to ZTE RRU and Port B connects to NSBT.
Note: The special AISG cable has a length of 2.8m. As in the case this cable
is too short it can be extended using standard AISG cable.
Proprietary Confidential
A 12345 A
A
6789
B
6/7 1/2
B 5
4 NA
B
NA NA
Contents
Hardware installation - A
Proprietary Confidential
Hardware installation - B
Proprietary Confidential
Hardware installation - C
Proprietary Confidential
Test the voltage of AISG female port (special AISG cable, ASBT or RCU) by site master;
Contents
We should scan AISG device by LMT after site swap, otherwise OMCB
cant control and adjust the antenna down tilt.
1. Login in CC, right click on ZXSDR BS8700 and choose Scan AISG Device,
Proprietary Confidential
3. Then comes to next window, no need to change anything, just click ok,
Proprietary Confidential
5. After about 10 minters, it will show us the result, the left reply means scan
successful , and the right one means scan fault .
Proprietary Confidential
Contents
Notes:
1. Test voltage in the AISG female port from RRU to RCU step by step ;
2. Attention and avoided short of ping 3,5,6, and 7 when you test,
otherwise the fuse of RRU AISG port will be broken;
Proprietary Confidential