Beruflich Dokumente
Kultur Dokumente
Advantages and Benefits It is recommended that air admittance White Black Grey
BS EN 12380. Approved Document H of the Building Air Admittance Valve Compression Air Admittance Valve Solvent Air Admittance Valve Solvent Air Admittance Valve Push Fit
G FloPlast air admittance valves are Regulations only permits Air Admittance CODE SIZE CODE SIZE CODE SIZE CODE SIZE
Solvent
BS EN 12380:2002 licence number If the air admittance valve is installed in a AV40 40mm (Universal fitting for
Remove seal from 110mm push fit
White 32mm/40mm/50mm
KM 512474. duct situation ventialtion and access must Waste Pipe) for 82mm
AV50 50mm
G British Board of Agrment (BBA) be provided.
G Saves the need to penetrate the outer G Prevents the loss of water from trap seals
approved 06/4343. Further detailed information on FloPlast roof shell, giving more aesthetic roof lines. and consequent release of foul air into
General Information Air Admittance Valves is available from the G Saves on the cost of pipes and the building.
The FloPlast Air Admittance Valve is detail sheet accompanying the BBA expensive fittings. G Secondary rodding point.
designed to allow the free entry of air into Agrement Certificate No. 06/4343.
G Saves on roof flashing.
the sanitary pipework system without the
escape of foul gasses into the building. Valve Open (Negative pressure in pipework) G Saves on labour costs.
www.floplast.co.uk
4 www.floplast.co.uk www.floplast.co.uk 5