Beruflich Dokumente
Kultur Dokumente
Panel Layout
There are two serials ports in InDTU300, COM 1 is for data communications and COM 2 is for configuration. We use
COM 2 to configure InDTU300.
Typical application
InDTU300 series can be used to connect your serial device (RS232/485) to internet via GPRS network.
Quick Connection to Internet
Step 1: Preparation
Notice: all the operation should be carried out when InRouter keep interruption of power supply.
If you see the following prompt, then you can continue your operations, if not, you have to check your
connection and serial parameters again.
2) Then therell be a window pop up, you should input adm/123456 to login.
3) Before configure InDTU300, youd better read the conf file first. Click Read Conf. File button to get the
configure file of InDTU300.
Now, you can configure what you want.
5) Click GPRS setting then input the right parameters you get from local mobile operator.
Auto Dialup --- On: dialup automatically after configuration / Off: dialup on demand (triggered by
SMS/Call/Serial Data)
Dialup Number--- default: *99***1#, provided by local mobile operator.
APN/Username/Password --- provided by local mobile operator
PPP Heartbeat Interval --- the heartbeat to keep link alive
Redial Interval --- when ppp dialup failed, after this interval, InDTU300 will redial
MAX Retries --- after MAX Retries and no dialup successful, InDTU300 will reboot
6) Click Data Center to configure the details of where InDTU300 connecting central site.
DTU No. --- The Number is for identifying InDTU(only for DC protocol).
Center IP --- Users data center IP address (must be a static IP, if you have DNS only, just set it blank and turn to
DNS).
Port --- Users data center servers port.
DNS --- if your center has only DNS, you can set DNS to let InDTU access to data center.
Protocols --- TCP/UDP client, Modbus Bridge. For Kingview SCADA, you can also set DC UDP protocols.
Heartbeat Interval --- after this interval, InDTU will send a heartbeat to detect whether the server is reachable.
MAX Retries --- after MAX Retries and no heartbeat successful, InDTU will reboot.
DNS IP1/IP2 --- Domain Name Server, recommended setting: 8.8.8.8/8.8.4.4 (Google Domain Name Server).
7) Finished configuration, click Write Conf. File to save the configuration into InDTU300
8) You should reboot InDTU300 after write conf file.
LED Indications
InHand Networks
Headquarters US Office
West Wing, 11th Floor, Qi Ming International Mansion 7926 Jones Branch Dr. Suite 110
Wang Jing Science Park, Chao Yang District McLean, Virginia,22102
Beijing, 100102, China USA
T:+86-10-6439-1099 T: +1-703-348-2988
F:+86-10-8417-0089 F:+1-703-348-2988
info@inhandnetworks.com www.inhandnetworks.com