Beruflich Dokumente
Kultur Dokumente
TB110MW9
DTV Digital to Analog Converter
(Set Top Box)
Important Safeguards
1. Read instructions - All the safety and operating instructions dplacez les deux ensembles avec prcaution. Un
should be read before the appliance is operated. arrt brusque, lutilisation dune force excessive et des
2. Retain Instructions - The safety and operating surfaces irrgulires risquent de dstabiliser lensemble
instructions should be retained for future reference. et de le renverser.
3. Heed Warnings - All warnings on the appliance and in 9. Ventilation - Slots and openings in the cabinet and the
the operating instructions should be adhered to. back or bottom are provided for ventilation and to ensure
4. Follow Instructions - All operating and use reliable operation of this product and to protect it from
instructions should be followed. overheating, and these openings must not be blocked
or covered. The openings should never be blocked by
5. Cleaning - Unplug this product from the wall outlet
placing this product on a bed, sofa, rug, or other similar
before cleaning. Do not use liquid cleaners or aerosol
surface. This product should never be placed near or
cleaners. Use a damp cloth for cleaning.
over a radiator or heat register. This product should not
EXCEPTION: A product that is meant for uninterrupted
be placed in a built-in installation such as a bookcase
service and, that for some specific reason, such as
or rack unless proper ventilation is provided or the
the possibility of the loss of an authorization code for
manufacturers instructions have been adhered to.
a CATV converter, is not intended to be unplugged
by the user for cleaning or any other purpose, may 10. Power Sources - This product should be operated
exclude the reference to unplugging the appliance in only from the type of power source indicated on the
the cleaning description otherwise required in item 5. marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or
6. Attachments - Do not use attachments not
local power company. For this products intended to
recommended by this product manufacturer as they
operate from battery power, or other sources, refer to
may cause hazards.
the operating instructions.
7. Water and Moisture - Do not use this product near
11. Grounding or Polarization - This product is equipped
water-for example, near a bath tub, wash bowl, kitchen
with a polarized alternating-current line plug(a plug
sink, or laundry tub, in a wet basement, or near a
having one blade wider than the other). This plug will
swimming pool, and the like.
fit into the power outlet only one way. This is a safety
8. Accessories - Do not place this product on an feature. If you are unable to insert the plug fully into
unstable cart, stand, tripod, bracket, or table. the outlet, try reversing the plug. If the plug should
This product may fall, causing serious injury still fail to fit, contact your electrician to replace your
to someone, and serious damage to the obsolete outlet. Do not defeat the safety purpose of
appliance. Use only with a cart, stand, the polarized plug.
tripod, bracket, or table recommended
12. Power-Cord Protection - Power-supply cords should be
by the manufacturer, or sold with this
routed so that they are not likely to be walked on or pinched
product. Any mounting of the appliance
by items placed upon or against them, paying particular
should follow the manufacturers instructions and
attention to cords at plugs, convenience receptacles, and
should use a mounting accessory recommended by
the point where they exit from the appliance.
the manufacturer. An appliance and cart combination
should be moved with care. 13. Outdoor Antenna grounding - If an outside antenna
Quick stops, excessive force, and uneven surfaces may or cable system is connected to this product, be
cause the appliance and cart combination to sure the antenna or cable system is grounded so
overturn. as to provide some protection against voltage
surges and built-up static charges. Article 810 of the
AMEUBLES - Cet appareil ne doit tre
National Electrical Code, ANSI/NFPA No. 70, provides
plac que sur un meuble (avec ou sans
information with respect to proper grounding of the
roulettes) recommand par le fabricant. Si
mast and supporting structure, grounding of the lead-
vous linstallez sur un meuble roulettes,
in wire to an antenna discharge unit, size of grounding
2
EN
ELECTRIC SERVICE
EQUIPMENT
GROUNDING
NEC - NATIONAL CONDUCTORS
ELECTRICAL CODE (NEC SECTION 810-21)
POWER SERVICE GROUNDING ELECTRODE GROUND CLAMPS
SYSTEM (NEC ART 250, PART H)
conductors, location of antenna-discharge unit, a. When the power-supply cord or plug is damaged
connection to grounding electrodes, and requirements or frayed.
for the grounding electrode. (Fig. A) b. If liquid has been spilled, or objects have fallen into
14. Lightning - For added protection for this product this product.
receiver during a lightning storm, or when it is left c. If this product has been exposed to rain or water.
unattended and unused for long periods of time, d. If this product does not operate normally by
unplug it from the wall outlet and disconnect the following the operating instructions. Adjust only
antenna or cable system. This will prevent damage to those controls that are covered by the operating
this product due to lightning and power-line surges. instructions, as improper adjustment of other
15. Power Lines - An outside antenna system should not controls may result in damage and will often
be located in the vicinity of overhead power lines or require extensive work by a qualified technician to
other electric light or power circuits, or where it can restore this product to its normal operation.
fall into such power lines or circuits. When installing an e. If this product has been dropped or damaged in
outside antenna system, extreme care should be taken any way.
to keep from touching such power lines or circuits as
f. When this product exhibits a distinct change in
contact with them might be fatal.
performance-this indicates a need for service.
16. Overloading - Do not overload wall outlets and extension
20. Replacement Parts - When replacement parts are
cords as this can result in a risk of fire or electric shock.
required, be sure the service technician has used
17. Object and Liquid Entry - Never push objects of any replacement parts specified by the manufacturer that
kind into this product through openings as they may have the same characteristics as the original part.
touch dangerous voltage points or short out parts that Unauthorized substitutions may result in fire, electric
could result in a fire or electric shock. Never spill liquid shock, injury to persons or other hazards.
of any kind on this product.
21. Safety Check - Upon completion of any service or
18. Servicing - Do not attempt to service this product repairs to this product, ask the service technician to
yourself as opening or removing covers may expose perform routine safety checks to determine that this
you to dangerous voltage or other hazards. Refer all product is in proper operating condition.
servicing to qualified service personnel.
22. Heat - This product should be situated away from heat
19. Damage Requiring Service - Unplug this product from sources such as radiators, heat registers, stoves, or other
the wall outlet and refer servicing to qualified service products (including amplifiers) that produce heat.
personnel under the following conditions:
The serial number of this product may be found on the bottom of the unit. You should record the number and
other vital information here and retain this book as a permanent record. Serial numbers are not kept on file.
Date of Purchase Dealer Phone No.
Dealer Purchase from Model No.
Dealer Address Serial No.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR VITER LES CHOCS LECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU
FOND.
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling,
standing or climbing on it. A falling unit can cause serious injury or even death.
3
EN
Precautions
4
EN
Basic Operation
Selecting Channels on the STB . . . . . . . . . . . . . . . . . . . 15
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed,
downloaded or stored in any storage medium, in any form or for any purpose without the express prior written
consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto
is strictly prohibited.
Information in this document is subject to change without notice. Funai reserves the right to change the
content herein without the obligation to notify any person or organization of such changes.
with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way
without the express written consent of Funai. All other trademarks used herein remain the exclusive property
of their respective owners. Nothing contained in this manual should be construed as granting, by implication
or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or
any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property
rights to the fullest extent of the law.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
5
EN
Overview
CONNECTION
A Connecting to TV without
B Connecting to TV with
P10
a TV with A/V jacks A/V jacks SET TOP BOX
Conexin a otros
dispositivos
SETUP WIZARD
1. Language for TV screen
Idioma para la pantalla
2. Connection for audio output
Conexin para salida de audio
3. Time zone
Husos horarios P14
4. Daylight savings time (D.S.T)
Hora de verano (D.S.T)
5. Display mode
modo de indicaciones
6. Channel scanning
Bsqueda de canales
6
EN
TV
Accessories
Check the following accessories when unpacking the STB:
Remote control: Owners manual: AA battery (x2) RF cable:
NA386UD (x1) 1VMN25977 (x1) WPZ0901TM002 /
WPZ0901TM005 (x1)
Installing Batteries
Instalacin de pilas
1 Unsnap the battery cover from the 2 Install two AA batteries making 3 Snap the battery
back of the remote control. sure the polarity (+ / - ) is correct. cover back.
Abra la cubierta de pilas de la parte Instale dos pilas AA asegurndose que Cierre la cubierta de
trasera del mando a distancia. la polaridad (+ / - ) sea la correcta. pilas.
CAUTION:
NOTE:
Do not mix battery types (alkaline and manganese, or old ones and
new ones).
When replacing batteries, No mezcle tipos de bateras (bateras alcalinas y de manganeso, ni pilas viejas
replace them in pairs. con pilas nuevas).
Cuando cambie las pilas,
Do not recharge, short-circuit, heat, burn or disassemble batteries.
No recargue, caliente, queme o desarme bateras ni provoque un corto circuito
hgalo por pares. con ellas.
Remove batteries from battery compartment that is not going to be
used for a month or more.
Quite las pilas del compartimento de pilas si no se va a utilizar durante un mes o ms.
7
EN
Location of Controls
Ubicacin del control
Remote Control
Mando a distancia
1 STANDBY-ON button: Turns STB on and off.
Conecta y desconecta el STB.
2 Number buttons
3 OK button
1 4 SETUP button: Displays SETUP menu.
7 Switches RF OUT setting by holding this button
down over 3 seconds.
2 8 Despliega el men AJUSTE.
Cambia la configuracin de SALIDA RF al mantenerse
presionado durante 3 segundos.
3 9 5 ALT. CH: Returns to the last selected channel.
10 Regresa al ltimo canal seleccionado.
4
6 AUDIO button: Selects alternative audio
languages (if available).
5 11 Selecciona idiomas de audio alternativos (si existen).
12 7 . (Confirm) button: Press to confirm the channel
6 13 selection made by [the Number buttons].
Presione para confirmar la seleccin del canal, hecha
con [los botones de Nmeros].
8 DISPLAY button: Displays the channel banner.
Despliega el banner del canal.
9 RETURN button: Returns to the previous menu
screen.
Regresa a la pantalla de men anterior.
10 Navigation buttons K / L / s / B
11 EPG button: Displays the Electronic Program
Guide.
Despliega la Gua Electrnica de Programas.
12 CH K / Lbuttons
13 STILL button: Freezes the image on the TV
screen.
Congela la imagen de la pantalla del TV.
To operate this STB with a universal remote, check the instruction manual for remote and find
Magnavox brand STB code. If you do not find the code or the code does not work, try to use Sylvania
brand STB code instead.
8
EN
1 2
1 Remote control sensor
2 POWER indicator:
Turns green when the STB is in operation.
Se vuelve verde cuando el STB est en operacin.
Rear Panel
Panel trasero
1 2 3 4 5
9
EN
TV
TV antenna
Antena de TV
STB
RF cable
(supplied)
cable de RF
(se incluye)
TV
TV antenna
Antena de TV
STB
ye
wh wh llow
ite red ite
red
yel Audio cable
low cable de audio Video cable
cable de
video
NOTE:
If your TV has only one audio jack, connect the AUDIO OUT jack (L) (white) on the STB to the audio input
jack on the TV.
Si su TV slo tiene una toma de audio, conecte la toma AUDIO OUT (L) (blanco) del STB, a la toma de entrada de audio
del TV.
10
EN
Connections
TV antenna
Antena de TV
TV STB
Cable TV
company
ye
wh llow empresa de
red ite TV por cable
wh
ite Audio cable
cable de audio
red
yel
low
Video cable
cable de video Cable box (optional)
caja de cable (opcional)
Incoming
cable signals
RF cable (supplied) Seales del cable
cable de RF (se incluye) de entrada
11
EN
TV antenna
Antena de TV
Splitter
Divisor
TV STB
ye RF cable
wh llow cable de RF
red ite
Audio cable
cable de audio
DVD Recorder or VCR
wh Grabador de DVD o videograbador
ite
red
yell
ow
wh
Audio cable ite
cable de audio
red
yel RF cable
low (supplied)
cable de RF
(se incluye)
Video cable
cable de video
If your DVD recorder or VCR has only one audio jack, connect the AUDIO OUT jack (L) (white)
on the STB to the audio input jack on the DVD.
NOTE: Si su grabador de DVD o videograbador slo tiene una toma de audio, conecte la toma AUDIO OUT (L)
(blanco) del STB, a la toma de entrada de audio del DVD.
12
EN
Initial Setup
Ajste inicial
(Setup Wizard)
Initial Setup
lights up in green
se vuelve verde
2 Turn on the TV, and select the viewing channel (ch3 or external input channel) on
your TV. (Refer to your TVs manual.)
Encienda el TV, y seleccione el canal que quiera ver (canal 3 o uno de entrada externo) en su TV. (Vase el
manual del TV.)
2
1
3
2 6
5 9
1
4 8
7 0 .
CH
.
CH
13
EN
14
EN
19:00
CH4-1 (Soccer)
E.g., selecting 26.12
Basic Operation
19:30
CH4-1 (Soccer) CH4-2 (News)
20:00
: Can be changed by
using [CH K / L].
NOTE:
15
EN
ENGLISH 1/4
SPANISH 2/4
FRENCH 3/4
OTHER 4/4
Picture Still
16
EN
The channel banner provides you with the information on the selected channel.
Press [DISPLAY].
Station name
Program title SMILE ABC-XXX Channel number :
3.1
Information Icons CC ENGLISH 1/2
Audio language
SIGNAL 50
CC (Closed Caption): Signal strength :
Indicates that the program being RESTRICTED PROGRAM Indicates the signal strength of
broadcast is available with closed the current channel.
captioning.
Basic Operation
TV-Y7 FV
Program ratings :
LOCK: Displays all the available ratings.
Indicates that the current program Active ratings are highlighted in
is blocked according to your V-chip red.
setting.
To remove the channel banner:
Press [DISPLAY].
Electronic Program Guide (EPG) is the electronic equivalent of a printed TV program guide.
You can view a list of programs scheduled for the next few hours up to the next seven days.
To display the correct information on EPG, TIME ZONE and D.S.T must be set correctly.
1 Press [EPG] while watching TV.
Closed Caption :
EPG CC Indicates that the program being
Program title SMILE Prog 2 ABC-XXX
3.1 broadcast is available with closed
12:00PM-1:00PM captioning.
Time segment for the program. SMILE 2-1
SMILE 2-2
NOW icon will be displayed on SMILE 2-3
the right for the current program. Channel number
PREV NEXT
17
EN
(Receiving Channels)
NOTE:
Autoscan receives available digital channels and
stores them in a channel map. If canceled, some channels not yet scanned may
not be received. We recommend completing
CAUTION: autoscan.
When you want to completely refresh the
If autoscan is skipped, digital channels may not channel map, delete all the channels, then do
be received correctly. the autoscan again. See Adding/Deleting
Channels on this page for details.
1 Press [SETUP].
When NO SIGNAL appears on the TV screen:
2 Select CHANNEL using [ K / L ],
Verify the antenna connection, then scan again.
then press [OK].
The STB tunes in channel 2-1 and NO SIGNAL
3 Select AUTOSCAN using [ K / L ], appears if the STB could not receive any channels.
then press [OK].
CHANNEL
EXIT
Adding/Deleting Channels
ADD/DELETE
CHANNEL
ANTENNA
TIME
DETAIL
AUTOSCAN Add or delete desired channels in the channel map.
RF OUT
INITIAL
CAUTION:
You cannot recover the deleted channels once
4 Select AUTOSCAN using [ K / L ], they are deleted unless you perform the
then press [OK]. autoscan again.
AUTOSCAN
1 Press [SETUP].
EXIT
AUTOSCAN will rescan all channels. 2 Select CHANNEL using [ K / L ],
This may take a while to complete.
CHANNEL
TIME
then press [OK].
BACK
DETAIL AUTOSCAN
SETUP
INITIAL
EXIT
ADD/DELETE
CHANNEL
ANTENNA
TIME
AUTOSCAN
AUTOSCAN DETAIL RF OUT
INITIAL
The system is now scanning.
map. TIME
ANTENNA
AUTOSCAN
When the scanning is complete, DETAIL RF OUT
INITIAL
NOTE:
5 Select the channel number you want
Entering sub-channel number is not required. to delete from the channel list on the
right using [ K / L ], then press [OK].
5 Press [OK] again to add the channel
to the channel map.
E.g., deleting channel 26.
EXIT
(or leave for CHANNEL
ADD
10
a few seconds) TIME
DELETE 20
26
DETAIL 58
INITIAL
ADD/DELETE 6.X
Operation
Advanced
EXIT ADD/DELETE 58.1
ADD
CHANNEL 6
DELETE 10 EXIT
TIME
20 ADD
CHANNEL 10
DETAIL 58 DELETE 20
TIME
INITIAL 58
DETAIL 60
INITIAL
E.g., adding channel 26.
The selected channel is now deleted.
(or leave for To continue deleting:
a few seconds)
Repeat step 5.
6 Press [SETUP] to exit.
ADD/DELETE 26.X
EXIT
ADD
CHANNEL 6
DELETE 10
TIME
20
DETAIL 26
INITIAL
19
EN
TIME
CLOSED CAPTION
DISPLAY MODE LETTERBOX
indication, adjust the antennas DETAIL AUTO POWER DOWN 4 HOURS
Status bar:
Stretches to the right as the signal 4 Select the desired display mode
strength gets stronger. using [ K / L ], then press [OK].
* Descriptions of each settings are explained
ANTENNA 10.1 in the Information on Display Mode on the
next page.
EXIT
WEAK STRONG Select display mode.
CHANNEL NOW
10
TIME LETTERBOX
50
DETAIL PEAK
BACK ZOOM
INITIAL
FULL
Peak indicator:
Indicates the highest strength ever 5 Press [SETUP] to exit.
reached.
20
EN
EXIT
TIME ZONE EASTERN
CHANNEL
CAUTION: TIME
D.S.T OFF
DETAIL
If the TV is left in LETTER BOX mode for a long period INITIAL
of time, the black bars may cause a permanent burn-
in effect.
4 Select your time zone using [ K / L ],
Operation
Advanced
then press [OK].
Select Time Zone.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
21
EN
DETAIL
INITIAL
4 Select ON or OFF using [ s / B ],
then press [OK].
D.S.T
CAUTION:
EXIT
Select Daylight Saving Time.
NOTE:
Do not forget the password. It will be used as
CHANNEL
2:00AM of the second Sunday in
March until 2:00AM of the first
your V-chip access password from the next time
TIME
Sunday in November. onward.
DETAIL
ON OFF
INITIAL 4-b Enter the password using [the
Number buttons].
5 Press [SETUP] to exit. Asterisk(*) will substitute for your password.
* * * *
V-chip Options
NOTE:
V-chip reads the ratings for programs, then denies
access to the programs which exceed the rating level
you set. With this function, you can block certain If you forget the password, enter 4737 then
programming inappropriate for children. proceed to New Password on page 24.
1 Press [SETUP].
2 Select DETAIL using [ K / L ], then
press [OK].
3 Select V-CHIP using [ K / L ], then
press [OK].
DETAIL
EXIT
V-CHIP
CHANNEL
CLOSED CAPTION
TIME
DISPLAY MODE LETTERBOX
DETAIL AUTO POWER DOWN 4 HOURS
INITIAL
22
EN
CHANNEL
MPAA RATING
TV RATING
R accompanying parent or adult
TIME
CANADIAN ENGLISH RATING
CANADIAN FRENCH RATING
guardian
DETAIL
DOWNLOADABLE RATING
CLEAR DOWNLOADABLE RATING PG-13 Unsuitable for children under 13
NEW PASSWORD
INITIAL
PG Parental guidance suggested
G General audience lower
NR No rating
NOTE:
Operation
Advanced
and its setting, select CLEAR DOWNLOADABLE None No rating
RATING.
23
EN
24
EN
DETAIL
CHANNEL
V-CHIP - the original CC style set by the broadcast
CLOSED CAPTION
TIME
DISPLAY MODE LETTERBOX
station will be applied.
DETAIL AUTO POWER DOWN 4 HOURS If you select MANUAL...
INITIAL
- you can customize the CC style as you like.
CHANNEL
DTV CC OFF 5 Select an item using [ K / L ], then
CC STYLE AUTO
press [OK]. Then use [ K / L ] to select
Operation
TIME CC STYLE EDIT
Advanced
DETAIL
INITIAL
the desired setting and press [OK].
25
EN
EXIT
V-CHIP
CHANNEL
CLOSED CAPTION
TIME
DISPLAY MODE LETTERBOX
DETAIL AUTO POWER DOWN 4 HOURS
INITIAL
26
EN
Method 1 Mtodo 1
You can view analog TV by switching RF OUT setting.
Usted podr ver TV analgica cambiando la configuracin de SALIDA RF.
CONNECTION
CONEXIN
TV
STB
TV antenna
Antena de TV
RF cable (supplied)
cable de RF (se incluye)
1 Press [STANDBY-ON] to activate the STB. 1 Press [STANDBY-ON] to activate the STB.
Presione [STANDBY-ON] para activar el STB. Presione [STANDBY-ON] para activar el STB.
2 Select RF THROUGH in RF OUT 2 Select CH3 in RF OUT menu.
( Page 29)
menu. ( Page 29) Seleccione CH3 en el men SALIDA RF.
Seleccione TRAVS DE RF en el men SALIDA RF.
3 Select ch3 on your TV.
Operation
3 Select the desired channel on your TV.
Advanced
Seleccione canal3 en su TV.
Seleccione el canal deseado en su TV.
ch3
ch4
3
2 6
5 9
1
4 8
7 0
ch6
CH.
CH.
ch8
2
5
3
6
9 You can view digital TV on ch3 of your TV.
1
4 8
7 0
CH.
CH.
ch3
NOTE: ch3
NOTE:
CONNECTION
TV antenna
Antena de TV
TV STB
ye
wh llow
red ite
Video cable
Audio cable cable de video
wh cable de audio
ite
red
RF cable (supplied)
yel cable de RF (se incluye)
low
1 Press [STANDBY-ON] to activate the STB. 1 Press [STANDBY-ON] to activate the STB.
Presione [STANDBY-ON] para activar el STB. Presione [STANDBY-ON] para activar el STB.
4 8
7 0
ch4
CH.
CH.
ch6
ch8
You can view digital TV on external input
2
5
3
6
9
channel of your TV.
1
4 8
externo de su TV.
3 Select desired channel on the STB.
You can view analog TV on your TV channel. Seleccione el canal deseado en el STB.
Usted podr ver TV analgica en su canal de TV.
AUX
AUX
AUX
28
EN
Operation
Advanced
Channel to CH3, then hold down a
SETUPbutton for 3 seconds. luego ajuste el canal de salida del STB a CH4.
RF THROUGH
CH3
CH4 Using [SETUP] to Switch RF OUT
Setting
5 Using [s / B], select YES. Then, Utilizando [SETUP] para cambiar la configuracin
SALIDA RF
press [OK].
Seleccione S utilizando [s / B]. Luego,
presione [OK]. over 3 seconds RF THROUGH
durante 3 segundos TRAVS DE RF
RF OUT is RF THROUGH
Are you sure ?
YES NO
If the screen doesnt show
anything after switching
RF OUT, set the TV Channel CH3
to CH3, then hold down a over 3 seconds
SETUPbutton for 3 seconds. durante 3 segundos
29
EN
Troubleshooting
Before requesting service, check the table below for a possible cause of the problem.
Symptom Remedy
No power
Make sure that the AC power cord is securely plugged into the power
outlet.
Make sure to point the remote control at the remote control sensor.
You may be too far from STB. Try moving closer.
The STB is not responding
Remove any obstacles between the remote control and the remote
control sensor.
to the remote control.
Make sure that the batteries are installed in the correct direction
(+ and ). ( Page 7.)
The batteries may be depleted. Replace them with new ones.
Make sure that the audio / video cables are correctly connected.
Make sure that the TV is turned on.
Make sure that the correct viewing channel (ch3 or external input
No audio / picture channel) is selected on your TV. ( Page 13.) Refer to your TVs manual
for further information.
Make sure the cables are not damaged.
Make sure RF OUT setting is correct. ( Page 29.)
Blocked noise on picture Make sure that the RF cable is connected correctly. ( Pages 10 - 12.)
No EPG or the provided Make sure that D.S.T and TIME ZONE is set correctly. ( Page 21.)
information is wrong
Low volume
Sound volume differs depending on the audio out setting. Select RF
OUT at step 5 in the Initial Setup (Setup Wizard). ( Page 14.)
Make sure to complete autoscan in SETUP WIZARD or in SETUP
menu. When autoscan is not completed, some channels will not be
received.
No reception The selected channel does not exist at that time. There are not always
sub-channels being broadcast.
Some channels with weak signal may not be received properly.
This is not a malfunction.
When you forget the If you forget the password, refer to New Password. ( Page 24.)
password for V-chip
Closed captioning display Change the channel on your TV.
(TEXT mode) does not go Turn the TV off, and then on.
off even after changing
channels through STB.
The TV screen goes blank This is a normal part of the start-up process and is not a malfunction.
just after turning the STB
on.
30
EN
Fin
31
EN