Beruflich Dokumente
Kultur Dokumente
www.vishay.com
Vishay Sfernice
Precision Linear Transducers, Conductive Plastic,
up to 1000 mm
FEATURES
Measurement range 25 mm to 1000 mm
High accuracy 1 % down to 0.025 %
Excellent repeatability
Essentially infinite resolution
Non sensitive to temperature variations
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
ELECTRICAL SPECIFICATIONS
Theoretical electrical travel (TET) = E From 25 mm to 1000 mm in increments of 25 mm
Independent linearity (over TET) 1 % 0.1 %
on request 0.05 % for E 100 mm 0.025 % for E 200 mm
Actual electrical travel (AET) AET = TET + 1.5 mm min.
Ohmic values (RT) 400 /cm to 2 k/cm
Resistance tolerance at 20 C 20 %
Repeatability 0.01 %
Maximum power rating 0.05 W/cm at 70 C, 0 W at 125 C
Wiper current Recommended: a few A - 1 mA max. (continuous)
Load resistance minimum 103 x RT
Insulation resistance 1000 M, 500 VDC
Dielectric strength 1000 VRMS, 50 Hz
Protection resistor Integrated inside the transducer to protect against errors when setting up (short circuit)
MECHANICAL SPECIFICATIONS
Mechanical travel E + 8 2 mm
Housing Anodized aluminum
Operating force 7.5 N typical
Shaft (free rotation) Stainless steel
Hydraulic type connector
Termination
DIN 43650
Wiper Precious metal multifinger
Mounting Movable brackets
PERFORMANCE
Operating life 40 million cycles typical/1 Hz/T = 20 C 5 C/80 % TET
Temperature range -55 C to +125 C
1.5 mm peak to peak 0 Hz to 10 Hz
Sine vibration on 3 axes
15 g - 10 Hz - 2000 Hz
Mechanical shocks on 3 axes 50 g - 11 ms - half sine
Speed (max.) 8 m/s for f < 2 Hz; 3 m/s for f < 5 Hz
Note
Nothing stated herein shall be construed as a guarantee of quality or durability.
4
M6
31.7 1 2
34.75
3 18.9
13.1
18.9
2 x 4.2
43
63 A
15
VIEW A-A ELECTRICAL CONNECTIONS
4. GROUND
PIN 3: +
PIN 2: WIPER
PIN1: -
TET
AET TET = THEORETICAL ELECTRICAL TRAVEL
MT AET = ACTUAL ELECTRICAL TRAVEL
MT = MECHANICAL TRAVEL
48 MAX. X
M6
CLEARANCE 3
ORDERING INFORMATION/DESCRIPTION
REC 115 L 23 D 103 W... e.
SERIES MODEL NUMBER THEORETICAL LINEARITY OHMIC VALUE MODIFICATIONS LEAD
OF TRACKS ELECTRICAL FINISH
TRAVEL
L=1 Times 25 mm A: 1 % First 2 digits are Special feature
D: 0.1 % significant numbers code number
E: 0.05 % 3rd digit indicates
F: 0.025 % number of zeros
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
Vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishays knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customers responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customers
technical experts. Product specifications do not expand or otherwise modify Vishays terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.