Beruflich Dokumente
Kultur Dokumente
www.supreme.in
Welding Punching
Galvanizing
Key Specifications
Material :Hot rolled coil from Q235 to Q460, ASTM
573 GR65, GR50, SS400, SS490, ST52-3
Hot dip galvanized Following BS EN ISO 1461-1999,
ASTM A123 or any other standard by client required.
Welding as per IS 813, AWS D 1.1
Base Plate ASTM A 633 GRE Ready Poles
132kV D/C type DA Monopole tested at 132kV D/C type DD Monopole tested at
CPRI (Bangalore) CPRI (Bangalore)
Arm Shapes
Arm Configuration
H+E = Total Length of Pole, H = Height above foundation, th = Thickness of Pole, dt = Diameter of Pole at Top
dg = Diameter of Pole at Ground Level, db = Diameter of Pole at Bottom, Ag = Area of Pole at Ground Level,
Zg = Section Modulus of Pole at Ground Level, St = Weigth of Conical Pole,
Awt = Weight of Swaged Pole presently available at Market