Beruflich Dokumente
Kultur Dokumente
Input At max M+
DASH moment units Input from DASH Tables
MDc1 k-ft T 1.2.5.1
MDc2 k-ft T 1.2.5.2
MDw k-ft T 1.2.5.2
M +
sidewalk k-ft T 1.2.5.3
M +
HL-93 k-ft T 1.2.5.3
Red ink is the reading from the DASH output tables or FHWA example. Blue ink is the calculated value to be compared with the DA
Yellow fill is the checking block
Check w/ DASH
Shear Tables 1.2.6.5 FHWA Shear Status
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
Max VDL 0.00 Factor Tables 1.2.6.2 0.00 OK?
Max Shear 0.00 Tables 1.2.6.5 0.00 OK?
Shear Range 0 Tables 1.2.6.5 0.00 OK?
Check w/ DASH
Shear Tables 1.2.6.5 FHWA Shear Status
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
= 0.00 Tables 1.2.6.5 0.00 OK?
Max VDL 0.00 Factor Tables 1.2.6.2 0.00 OK?
Max Shear 0.00 Tables 1.2.6.5 0.00 OK?
Shear Range Tables 1.2.6.5
Output At max M+
fDc1 + fDc2 fDw f+HL-93 f+sidewalk stress
Service I 1 x #DIV/0! + 1 x #DIV/0! + 1 x #DIV/0! + 1 x ### = #DIV/0!
Service II 1 x #DIV/0! + 1 x #DIV/0! + 1.3 x #DIV/0! + 1.3 x ### = #DIV/0!
Strength I 1.25 x #DIV/0! + 1.5 x #DIV/0! + 1.75 x #DIV/0! + 1.75 x ### = #DIV/0!
Strength II 1.25 x #DIV/0! + 1.5 x #DIV/0! + 1.35 x #DIV/0! + 1.35 x ### = #DIV/0!
Strength II 0.9 x #DIV/0! + 0.65 x #DIV/0! + 1.35 x #DIV/0! + 1.35 x ### = #DIV/0!
Red ink is the reading from the DASH output tables or FHWA example. Blue ink is the calculated value to be compareD with the DASH output/FHWA example.
Yellow fill is the checking block
Check w/ DASH
Tables, 1.2.9.5, A-F FHWA bot stress Status
Tables, 1.2.9.5, A-F 0.00 OK?
Tables, 1.2.9.5, A-F 0.00 OK?
Tables, 1.2.9.5, A-F 0.00 OK?
Tables, 1.2.9.5, A-F 0.00 OK?
Tables, 1.2.9.5, A-F 0.00 OK?
TABLE 4: MOMENT RANGE AND FATIGUE STRESS CHECK
Red ink is the reading from the DASH output tables or FHWA example. Blue ink is the calculated value to be compared with the DASH output/FHWA example.
Yellow fill is the checking block
T x.x.x.x is the DASH output table number. Please refer to the DASH output or user's manual
or finite life
OK?
utput/FHWA example.
TABLE 5: SHEAR RANGE AND SHEAR CONNECTOR CHECK
At 1st abutment
No. of Connectors per row, n =
VLL Range Q/I Vf Vsr=Vf*Q/I Vsr Connector, Default
T 1.2.6.3A T 1.2.4.3 T 1.2.22.24.1 calculated T 1.2.22.24 Diameter, d
kips k/in k/in in
0.000 0.000
T 1.2.22.24.2
0.000 0.000
Max All. Shear Con. Pitch Max All. Shear Con. Pitch
calculated T 1.2.22.24.1 T 1.2.22.24.2
pnZr/Vsr
FHWA Pitch 0.00
Red ink is the reading from the DASH output tables or FHWA example. Blue ink is the calculated value to be compared with the DA
Yellow fill is the checking block
CK
ADTTsl
assumed
Infinite life
Finite life
Infinite life
Finite life