Sie sind auf Seite 1von 49

www.cuedee.

com
Cue Dee develops and markets innovative
Part of Lagercrantz Group Find us on Linked In
solutions covering the wind and telecom industry

MASTS & TOWERS


PRODUCT CATALOG

foundations & guy anchors


QUALITY DESIGN AND HIGH TECH SOLUTIONS FOR THE TELECOM AND WIND MEASURMENT INDUSTRIES

WIND ACCESSORIES
supports & brackets
rooftop solutions

P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


NEW PRODUCTS
www.cuedee.com www.cuedee.com www.cuedee.com
NEW PRODUCTS
MASTS & TOWERS

MASTS & TOWERS


CHAIN BRACKET RRU DOUBLE LIGHT POLE MOUNT

CONTENT
is designed for instal-
Welcome to 2017 years edition
is a fastening system
for installation of lation of two RRU units
telecom equipment or on mast, towers or
other type of equip-
ment on monopoles or
of the Cue Dee product catalogue PRODUCT CATALOG for telecom and wind material
other vertical struc-
tures.
round poles.

PAGE 39 Last year we decided to merge our two product catalogues in to one. This was
much appreciated by our customers since it made finding the product a lot easier. 7 MASTS & TOWERS
X-Towers....................................................... Page 8
K-Mast/Tower System................................... Page 10
PAGE 45

This year we have added a number of new products to our two business areas Guyed K-Mast System.................................. Page 12
Chain Bracket RRU Holder Telecom and Wind. Guy Frames.................................................. Page 13
OFFSET SUPPORT

foundations & guy anchors


foundations & guy anchors

is designed for instal- Guy Wires..................................................... page 14


lation of one RRU unit is designed for
on Cue Dee Chain installation of one

15
Bracket. It fits Erics- During 2016 we have continued to even more important it is also a requirement in FOUNDATIONS & GUY ANCHORS antenna together with
son, Huawei and NSN strengthen our sales organization, we now order to deliver and install Rooftop and Bracket Mast Foundation for Soil................................ Page 16 RRU units on masts,
RRU models. have Cue Dee representatives in both India solutions. We see this as a further step forward Mastbase for Rock........................................ Page 17 towers or other vertical
and U.S.A We did this to improve our global in our process to be a top quality supplier to Guy Discs..................................................... Page 18 structures.
PAGE 40 presence and to be able to offer our customers the telecom industry. Guy Foundations........................................... Page 19
the best service possible.
Sleeper Fundament....................................... Page 20 PAGE 46
Rock Anchors............................................... Page 21
As for new products this is a constantly
Rock Guy Foundations.................................. Page 22
CHAIN BRACKET SMALL CELL HOLDER We have worked with aluminium for more ongoing process within Cue Dee, we have LIFTING DEVICE
than 20 years and we have always felt that during the year continued to strengthen our
is designed for instal-
23
this is the best material for designing and R&D department and we are now 7 persons WIND ACCESSORIES
is an aid designed to
lation of one NSN
making antenna supports, brackets and any working with development of new products. Wind Measurement Booms........................... Page 24 facilitate lifting Cue
Small Cell unit on Cue
number of mounting solution used in the Top Spires..................................................... Page 27 Dee Offset Support
Dee Chain Bracket to-
telecom industry. SEARCHING FOR SOLUTIONS, please peruse Boom Supports............................................. Page 29 during installation.

WIND ACCESSORIES
gether with the Small
WIND ACCESSORIES

Cell Bracket. our catalog or feel free to visit our web site Adapters....................................................... Page 31
With new and effective production methods where you can find the latest solutions and Climbing Barriers........................................... Page 32 PAGE 47
PAGE 41 as well as an increasing part of recycled newly released products that did not make it Lightning Rods.............................................. Page 34
Wind Turbine Supports.................................. Page 35
aluminum used it is also about to qualify as an to the catalog by print time.
Slack Pullers ................................................. Page 36
environmental friendly raw material compa-
Marking/Warning Flags ................................. Page 37
Chain Bracket Tube Holder red too many others. This goes hand in hand INNOVTATIVE SOLUTIONS made it into this SMALL CELL BRACKET
with our work to minimize our environmental catalog and we are specifically excited about
is designed for is designed for instal-
38
installation of 60 mm impact, you can read more about this next to our Chain Bracket that you will find on page SUPPORT & BRACKETS
this editor. 39. This solution offers interchangeable at- lation of one NSN
mounting tubes in 2 New Products............................................... Page 39
tachments covering antennas, radios, filters Small Cell unit on wall
levels as an accessory Antenna Supports......................................... Page 51
During 2014 we became certified according and other common telecom equipment. or vertical structures.
to the Chain Bracket RRU Supports............................................... Page 64
system. to the EN 1090 standard. It is since mid-2014
a requirement in order to deliver masts and Melker Persson, Marketing Manager
PAGE 48

75
PAGE 42 towers within the European Union, but perhaps ROOFTOP SOLUTIONS

supports & brackets


supports & brackets

Freestanding................................................. Page 76
Fixed............................................................. Page 86
Chain Bracket Tube Holder ext. THE SINGLE RADIO MOUNT

90
is designed for COMPONENTS is designed for easy
installation of 60 mm Alubra Beams................................................ Page 90 installation of one
mounting tubes in 2 Mounting Tubes............................................. Page 92 Ericsson RRU on wall
levels as an accessory Climbing Step............................................... Page 94
Part of Lagercrantz Group or vertical structures.
to the Chain Bracket Cable Holder................................................. Page 95
system.
CUE DEE triple-A rated CUE DEE
PAGE 49
PAGE 43 Cue Dee has been rated triple-A according to Soliditet, the
leading credit rating company in the Nordic region. Their AAA
Sike 58 | SE-915 93 ROBERTSFORS | SWEDEN
Telephone: +46 934 153 10 | Fax: +46 934 150 72
credit rating system is the Nordic regions most trusted and
advanced evaluation model. info@cuedee.com | www.cuedee.com

RRU LIGHT POLE MOUNT THE MULTI RADIO MOUNT


Dont forget to visit our homepage for

rooftop solutions
rooftop solutions

is designed for instal- updates, downloads, news magazine and much more! is designed for easy
lation of one RRU unit www.cuedee.com installation of up to
on mast, towers or three Ericsson RRUs
other vertical struc- on wall or vertical
tures. structures.
2 PAGE 44 3
PAGE 50

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Certificates The CUE DEE Core values
Health & Safety
Cue Dee is certified according to OHSAS 18001:2007
Cue Dee embraces the principle of continuous improvement and systematic development of the working environment.

In the management of our work environment our aim is to create a workplace that is stimulating for all employees. We
achieve this by integrating health and safety standards in all aspects of work undertaken through encouragement of
strong leadership that promotes a safe work environment.

foundations & guy anchors


foundations & guy anchors

We continuously develop competencies and commitment from our employees.


Our management system is applied to all aspects of our business and is an active tool in our ambition to achieve more
efficient processes, always with our customers, the environment and working conditions in focus.

We annually measure and report the employees satisfaction index.

Environment
CUE DEE is certified according to ISO 14001:2004
Our environmental management system emanates from the Natural stepsfour conditions to obtain a sustainable We always focus on the customers specific demands and wishes
society.

These are:
To prevent increasing concentrations of substances extracted from the earths
crust into the environment. Respect Cue Dees products are light, flexible and easy to install. The innovative
To prevent increasing concentrations of substances produced by society into nature. All our actions are based on respect for our customers and suppliers as design is the basis for the total cost efficiency throughout the products

WIND ACCESSORIES
To avoid intrusion on nature physically.
WIND ACCESSORIES

well as internally. We always focus on the customers specific demands lifetime. Cue Dee has several patented solutions.
Not to create obstacles that prevent people from satisfying their needs.
and wishes.
We have identified the following major environmental aspects: Responsibility
To minimize the material consumption of steel and aluminium in our products. Professionalism Our ultimate goal is to be your reliable partner. This includes everything
To minimize emissions in connection with transport. The v solutions are ingeniously designed in every aspect, from the smal- from the suggested solution to comprehensive aftermarket service. Our
lest clamp to overall global logistic solutions. Depending on your demands, commitment regarding business, quality, technology, environment and
we can supply a customised solution based on our flexible standard com- deliveries must always be kept in order to maintain our position as your
Quality
CUE DEE is certified according to ISO 9001:2008 ponents. responsible supplier.
Our quality management system serves as a guide for Cue Dees entire operation and is based on specified custo-
mer demands.

These include:
Reliability Responsiveness Speed Flexibility CUE DEE AB is now certified according to EN 1090-1
Innovation Cost efficient solutions Responsibility

supports & brackets


supports & brackets

Annual customer surveys ensure that we always keep up-to-date with the
changing customer needs and demands.
In compliance with Regulation 305/2011/EU of to products sold within Europe, Cue Dee products sold out-
the European Parliament and of the Council of 9 March side Europe will also fulfill these requirements. The EN-1090
2011, Cue Dee AB has, as of November 2014, been regulation is completely in line with Cue Dees own require-
granted the certificate of conformity of the factory ments in delivering safe and secure high quality products.
EN 1090-1:2009+A1:2011 production control. Certificate id: 0402 - CPR -
This certificate attests that all provisions concerning the assessment and verification SC0642-14 To achieve this certification we have been working
of constancy of performance described in annex ZA of the standard EN 1090-1:2009+A1:2011 with our suppliers both within and outside Europe. Since we
under system 2+ for the performances set out in this certificate are applied and that the factory production This regulation applies for all structural products are using a profound supplier base and with our own quality
control fulfils all the prescribed requirements for these performances. of steel and aluminium throughout the European design the effort of achieving this certification has been
market. quite reasonable.
This certificate was first issued on 2014-11-11 and will remain valid as long as the test methods and/or factory
production control requirements included in the harmonised standard, used to assess the performance of the de- For CUE DEE this is a preferred regula- We received our certificate in November and can now
clared essential characteristics, do not change, and the construction product, and the manufacturing conditions tion which places relevant requirements on CE mark all of our relevant products.

rooftop solutions
rooftop solutions

in the plant are not modified significantly, unless suspended or withdrawn by the product certification body. this kind of products, although this only applies

4 5

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com

o u t
MASTS & TOWERS

MASTS & TOWERS


inf o a
aluminium

foundations & guy anchors


foundations & guy anchors

WIND ACCESSORIES
WIND ACCESSORIES

Advantages of aluminium Easy to form


Aluminium is the third most common element. About eight percent of the Aluminum is a soft material which makes it easy to shape, but through
Earth crust consists of aluminium. It is extracted from bauxite, which is the usage of different alloys aluminium can also provide almost the same
mined in open pit mines mainly around the equator. strength as many steel structures.
Australia, Brazil and Jamaica are three of the most important countries in The material is easy to work with and can be welded, soldered and glued, it
the world when it comes to extracting Bauxite, but also in Europe, in e.g. has great corrosion resistance and also a high surface finish.
Hungary and in the Balkans bauxite is extracted.

MASTS
The aluminum oxide is produced from bauxite at the oxide plants, these Light weight
plants are located in close proximity to the open pit mines, the aluminium With a weight of 2.7 kg/dm3, aluminium weighs only a third of steel. The
oxide is then processed at the primary plant where pure aluminium is ex- interest and the usage of aluminium is growing, not least in the car- and
tracted. transport industry which strives for lighter designs to reduce fuel consump-
tion.
Aluminium profiles

AND towers
Almost every construction problem can have a simple solution: Reduced energy consumption

supports & brackets


supports & brackets

Aluminium can be used instead of steal, copper, plastic or wood. Its true that relatively high energy consumption is needed in the primary
The material is easy to form and the final products has low weight, high production of aluminium, around 16 000 kWh/ton. This problem is mana-
strength, high surface finish and with a high corrosion resistance. geable however since the primary production plants are located in regions
The tooling costs are reasonable, the technical limitations are few and the with a surplus of energy. However, new production methods has shown that
possibilities are almost endless. it is possible to reduce the energy consumption in the primary production
to around 10 000 kWh/ton.
About smelting plants CUE DEE has two different tower systems.
About 50% of the aluminium used in our products comes from recycled Recyclable The K-system and the X-system, both are made of galvanized steel.
aluminium. Our suppliers use both internal and external aluminium scrap to Today the recycling of aluminium is well developed and the remelting of
reuse in their own smelting plants. aluminium requires only 5% of the energy consumption compared to pri-
mary production of aluminium.
Quick regeneration The recycling of aluminium can be done as many times as you need, wit-
Despite a growing bauxite extraction there is no shortage of raw material hout deteriorating the quality of the material.
since bauxite is formed about 50 times faster than it is extracted.

rooftop solutions
rooftop solutions

Research has shown a number of benefits using aluminum instead of other


materials, this can be an explanation of the rapid market growth.

6 7

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


X-Tower System
Straight X Section: Section Type: Section Width:

0,75 m
(2,5 ft)
40-50 mm (1,6-2,0 in) X-1
solid rod frame leg.
X-TOWER SYSTEM 0,75 m

Straight X Section.
Consists of 4 m (13,1 ft) high standard sections and the straight sections (2,5 ft)
are 4 and 2 meters. The side of the sections range from 750 mm (29,5 in) to X-2

2 and 4 meter. (6,5 ft and 13 ft)

foundations & guy anchors


foundations & guy anchors

4350 mm (171 in) bottom width. The tower has solid rod tower legs which
1,05 m
create low windload on the structure. Therefore the tower can use a smaller U 40 x 35 x 4 (1,6 x 1,4 x 0,16 in) (3,5 ft)
bracing member.
footprint and foundation. X-3
FLEXIBILITY 1,35 m
The X-Tower is designed to be easy to erect without the need of a crane or (4,5 ft)

a helicopter. The transport volume is kept small thanks to the 4 m (13,1 ft) X-4
section length and the handling of the components is easy. 1,65 m
(5,5 ft)
QUALITY
X-5
The tower is CE marked and manufactured according to EN-1090. The frame
legs are solid rod steel members and the bracing members are channel pro- 1,95 m
ter (6,5 ft)
files. All members are hot-dip galvanized. As the members are solid, the risk 5 me )
0,7 2,5 ft X-6
of corrosion on the inside of hollow members is eliminated. (

WIND ACCESSORIES
2,25 m
Accessories
WIND ACCESSORIES

Tapered X Sections: (7,4 ft)


Climbing barriers, lightning rods, booms, top spires, fall arrest system, ob- X-7
struction lights, brackets, etc. are available on request. It is possible to attach
a number of antennas using the Cue Dee universal clamps. 2,55 m
(8,4 ft)
X-8
50, 55, 60, 65, 70, 75 mm
(2,0, 2,16, 2,36, 2,56, 2,75, 2,95 in) 2,85 m

Tapered X Sections.
solid rod frame leg depending on tower (9,4 ft)
configuration.
X-9
Technical Details
Optimal height: 20-60 m (65,6-197 ft) 3,15 m
(10,3 ft)
U 40 x 35 x 4 (1,6 x 1,4 x 0,16 in)
Design Standards: TIA 222-G, Eurocode 3, part 1-1, part 1-8 and part 3-1, DIN V 4131 bracing member. X-10

supports & brackets


supports & brackets

4 meter. (13 ft)


Materials: Legs: S355, Braces: S355. 3,45 m
(11,3 ft)
Connections: Bolts, nuts and washers class 10.9
X-11
Anti corrosion: All steel elements are hot-dip galvanised (ISO 1461) Optional
painting (red/white). 3,75 m
(12,3 ft)
Ladder: Open or caged ladder (inside or outside). Safety climbing rail and X-12
cable support are optional.

Anchoring: Anchor bolts grade 8 according to EN ISO 898-1:1999 4,05 m


(13,3 ft)
Positioning template. X-13
Accessories: Work and rest platforms, antenna supports, anti-climb guard,
obstruction light, lightning protection kit, door opening on bottom 4,35 m
section. ,3 ft) (14,3 ft)
(14
ter

rooftop solutions
rooftop solutions

Documentation: Detailed packing list, installation manual, foundation design. 5 me


x 4,3
NOTE! Please contact our sales or design department for configuration and optimizing of your X-Tower. Ma

8 9

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


K-mast/tower system
product No: 4911 / 4933 / 4939 / 4938

k600
The modular K -System
consists of square 2 m (6,6 ft) high sections. The side of the sections range product no: 4911 Drawing No: CD 431100

K600
from 600 mm (23,6 in) to 1350 mm (53,1 in). Tapered sections are used to
section side: 600 mm (23,6 in) section height: 2000 mm (78,7 in)

foundations & guy anchors


foundations & guy anchors

connect two different section sizes.


frame leg diameter: 25 mm (1,0 in) weight / section: 70 kg (154 lb)
Flexibility
The towers can be built at any height up to 40 m (131 ft) and the masts up to
200 m (656 ft). There is no need for an external ladder since the towers are
climbable on the inside and/or outside. It is possible to assemble the tower
k600 STRONG
by using gin pole, crane or helicopter.
product no: 4933 Drawing No: CD 431170
Quality

CONICAL SECTION
The tower sections are robot welded and CE-marked according to EN-1090. section side: 600 mm (23,6 in) section height: 2000 mm (78,7 in)

K900-K600
The mast sections consist of solid rod galvanized steel components. This
frame leg diameter: 30 mm (1,2 in) weight / section: 75,4 kg (166 lb)
gives the system excellent corrosion resistance and a long life. Since the
frame legs are made from solid steel rods there is no risk of inside corrosion.

Accessories

WIND ACCESSORIES
conical section / k900-k600
WIND ACCESSORIES

Climbing barriers, lightning rods, booms, top spires, fall arrest system, ob-
struction lights, brackets, etc. are available on request.
product no: 4939 Drawing No: CD 431160

section side: 900/600 mm (35,4/23,6 in) section height: 2000 mm (78,7 in)

frame leg diameter: 25 mm (1,0 in) weight / section: 110 kg (242,5 lb)

K900
Technical Details
Optimal height: 2-40 m (6,6-131 ft) k900

Design Standards: TIA 222-G, Eurocode 3, part 1-1, part 1-8 and part 3-1 DIN V 4131 product no: 4938 Drawing No: CD 441150

Materials: Legs: S355, S460 Braces: S355 section side: 900 mm (35,4 in) section height: 2000 mm (78,7 in)

supports & brackets


supports & brackets

Connections: Bolts, nuts and washers class 10.9 frame leg diameter: 35 mm (1,4 in) weight / section: 140 kg (308 lb)

Anti corrosion:
CONICAL SECTION

All steel elements are hot-dip galvanised (ISO 1461) Optional pain-
K1350-K900

ting (red/white).

Ladder: Open or caged ladder (inside or outside). Safety climbing rail and cable
support are optional.

Anchoring: Anchor bolts grade 8 according to EN ISO 898-1:1999


Positioning template.
K1350

Accessories: Work and rest platforms, antenna supports, anti-climb guard, ob-
struction light, lightning protection kit.

Documentation: Detailed packing list, installation manual, foundation design.

rooftop solutions
rooftop solutions

NOTE! Please contact our sales or design department for configuration and optimising of your K-mast/tower system.

10 11

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Guyed k-mast system GUY FRAMEs
product No: 1581 / 4933 / 1577 / 5343 / 5342 product No: 1941 / 5029 / 1591 / 5369

The modular K-System external ladder since the masts are climbable on THE GUY FRAMES
consists of square 2 m (6,6 ft) high sections. The the inside and/or outside. The mast is possible to are placed between the mast sections at heights according to the specific
side of the sections range from 600 to 1050 mm assemble by using gin pole, crane or helicopter. mast drawing. The guy frames work as the anchoring points for the guy wires

foundations & guy anchors


foundations & guy anchors

(23,6 to 41,3 in). Tapered sections are used to in the mast.


Quality
connect two different section sizes. To support the
The mast sections are made of galvanized steel FLEXIBILITY
mast, guy wires are used at multiple levels depen-
components. This gives the system excellent The guy frames are available to all our different mast types. We also have
ding on the height of the mast.
corrosion resistance and a long life. All sections torsion versions of the guy frames, they are mainly used for higher masts to
Flexibility are an all welded design. All masts are CE-marked provide extra torsion/twisting resistance.
We have a number of standard green field masts and manufactured according to EN-1090.
QUALITY
of different heights designed for specific antenna
Accessories The guy frames are made of galvanized steel components. This gives the
loads and wind speeds. If none of our standard
Climbing barriers, lightning rods, booms, top spi- system excellent corrosion resistance and a long life.
masts suit your needs the masts can of course be
res, fall arrest system, obstruction lights, brackets,
built according to your specifications. Just let us Easy Assembly
etc. are available on request.
know what you are looking for and we will design Each guy frame is attached with 8 pcs (16 for the K-600 strong) of M16 bolts,
a mast to suit your needs! There is no need for an washers and nuts to the foot plates of the K-600 sections.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information
FUNCTION DESCRIPTION: The modular standard K-system consists of square modules, ranging from 600 mm (23,6 in) sides to 1050 mm
(41,5 in) sides, that can be combined into guyed masts of desired height. Tapered sections creates a smooth FUNCTION DESCRIPTION: The guy frames are placed between the mast sections at heights according to the specific mast drawing.
transition between different sizes of straight modules. All modules, straight and tapered, are 2 meters high. The guy frames work as the anchoring points for the guy wires in the mast.

PRODUCT NAME: K600 K600 STRONG K900 K1050 K1050 STRONG PRODUCT NAME: K-600 K-600 STRONG K-900 K-1050 K-1050 STRONG
Prod. No: 1581 4933 1577 5343 5342 ORDER No: 1941 5029 1591 5369 5369
Drawing No: CD 431100 CD 431170 CD 441150 CD 455030 CD455020 drawing no: CD 431142 CD 431142 Strong CD 441142 CD 455043 CD 455043

MECHANICAL DATA: Length: 749 mm (29,5 in) 840 mm (33,0 in) 1085 mm (42,7 in) 1140 mm (44,9 in) 1140 mm (44,9 in)
Section side: 600 mm (23,6 in) 600 mm (23,6 in) 900 mm (29,5 in) 1050 mm (41,4 in) 1050 mm (41,4 in) Width: 749 mm (29,5 in) 840 mm (33,0 in) 1085 mm (42,7 in) 1140 mm (44,9 in) 1140 mm (44,9 in)
Section height: 2000 mm (78,7 in) 2000 mm (78,7 in) 2000 mm (78,7 in) 2000 mm (78,7 in) 2000 mm (78,7 in) Height: 60 mm (2,4 in) 60 mm (2,4 in) 60 mm (2,4 in) 100 mm (3,9 in) 100 mm (3,9 in)
Frame leg diameter: 25 mm (0,98 in) 30 mm (1,18 in) 35 mm (1,37 in) 50 mm (1,94 in) 60 mm (2,36 in) Weight: 28 kg (61,7 lb) 52 kg (114,7 lb) 44 kg (97,0 lb) 102 (225 lb) 102 (225 lb)

rooftop solutions
rooftop solutions

Weight/section: 70 kg (154 lb) 75,4 kg (166 lb) 140 kg (309 lb) 300 kg (661 lb) 312 kg (688 lb)) Material: Galvanized steel Galvanized steel Galvanized steel Galvanized steel Galvanized steel
NOTE! Please contact our sales or design department for configuration and optimizing of your K-mast system.

12 13

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


GUY WIREs
product No: 1758 / 1757 / 4915 / 1759 / 5372 / 5163 / 5373

THE GUY WIREs


are available in many different dimensions depending on mast height and
load. We always supply you with the correct guy wires to your mast.

foundations & guy anchors


foundations & guy anchors

FLEXIBILITY
The guy wires are available in 7 or 19 strand versions. Thicker guy wires can
be hard to work with if you have fewer strands as they become very stiff, it
might then be advantageous to use the 19 strand version.

QUALITY
The guy wires are made of galvanized steel. This gives the system excellent
corrosion resistance and a long life. The guy wires are usually shipped to the
mast site uncut on wire drums. The guy wires are then measured and cut at
site to ensure correct length depending on terrain variations. 10% extra wire
is always included in the mast delivery.

Easy Assembly
Each guy wire is attached to the mast and to the anchoring point in the

WIND ACCESSORIES
WIND ACCESSORIES

ground with a slack puller.

foundations
and guy anchors

supports & brackets


supports & brackets

ORDER AND Technical information


FUNCTION DESCRIPTION: Guy wires are needed to give the mast rigidity and torsion resistance.
Different guy wire dimensions are available depending on mast height, location and load.

ORDER NO: Strands: mm: Weight/m: Min Breaking load: mast foundations for both rock and soil conditions.
52 mm (2,0 in) 1758 7 9,2 mm (0,36 in) 410 grams (0,90 lb) 68kN We can also provide you with different types of guy anchors.
68 mm (2,7 in) 1757 7 10,6 mm (0,41 in) 535 grams (1,17 lb) 89kN
89 mm (2,0 in) 4915 7 12,1mm (0,47 in) 698 grams (1,53 lb) 116kN
105 mm (4,1 in) 1759 7 13,1mm (0,51in) 821 grams (1,80 lb) 136kN
135 mm (5,3 in) 5372 19 15 mm (0,59 in) 1060 grams (2,33 lb) 175kN
142 mm (5,6 in) 5163 19 15,4 mm (0,60 in) 1120 grams (2,46 lb) 184kN

rooftop solutions
rooftop solutions

185 mm (7,3 in) 5373 19 17,6 mm (0,69 in) 1470 grams (3,24 lb) 241kN

14 15

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


FOUNDATIONs (soil) mast base (rock)
We supply tailor made mast foundations to all our masts

K-600 Mast Foundation K-600/K-600 STRONG AND K-900 STEEL MAST BASE
are steel mast bases used when installing our K-masts on bed rock.
product No: 3143
Flexibility

foundations & guy anchors


foundations & guy anchors

K-600 Concrete Mast Foundation The foundation is delivered complete with threaded rods, washers and nuts.
is a concrete slab 1700 x 1700 x 400 mm (67 x 67 x 15,7 in)
used when installing the K-600 mast on soil. Quality
The steel mast base is made out of a HEB 100 steel beam for maximum
ORDER AND Technical information strength and durability. We have also added extra reinforcement plates to in-
Drawing No: FSK600-6021 KIT crease the strength even more. The threaded rods, nuts and washers are all
galvanized for maximum corrosion resistance. A minimum or maintenance is
Package dimensions: Length: Width: Height: Weight: required thanks to the corrosion resistance of the mast base.
1,7 m (67 in) 1,7 m (67 in) 400 mm (15,7 in) 2700 kg (5952 lb)

K-600 Strong Mast Foundation K-600/K-600 Strong mast base

WIND ACCESSORIES
WIND ACCESSORIES

product No: 5521 product No: 3953

K-600 Strong Concrete Mast Foundation K-600/K-600 Strong mast base


Consists of two concrete slabs 2200 x 2200 x 250 mm (87 x 87 x 9,9 in) and is a steel cross 883 x 883 mm (34,8 x 34,8 in) used when installing the
1700 x 1700 x 400 mm (67 x 67 x 15,7 in) it is used when installing the K-600/K-600 strong mast on rock.
K-600 Strong mast on soil.

ORDER AND Technical information ORDER AND Technical information


Drawing No: FSK600-6033 Drawing No: CD 431156

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
2,2 m (87 in) 2,2 m (87 in) 650 mm (25,6 in) 5700 kg (2700 x 2) (12566 lb) 883 mm (34,8 in) 883 mm (34,8 in) 140 mm (5,5 in) 59 kg (130 lb)

supports & brackets


supports & brackets

K-900 Mast Foundation K-900 mast base


product No: 3013
product No: 3142

K-900 Mastbase
K-900 Mast Foundation
is a steel cross 1167 x 1167 mm (46 x 46 in) used when installing the
is a concrete slab 1700 x 1700 x 400 mm (67 x 67 x 15,7 in) used
K-900 mast on rock.
when installing the K-900 mast on soil.

ORDER AND Technical information ORDER AND Technical information


Drawing No: FSK900-6010 Drawing No: CD 441156

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

1,7 m (67 in) 1,7 m (67 in) 400 mm (15,7 in) 2700 kg (5952 lb) 1167 mm (46 in) 1167 mm (46 in) 195 mm (7,7 in) 111 kg (245 lb)

16 17

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


guy discS guy foundations
PRODUCT No: 5905

GUY DISCs QUALITY The guy foundations


are used as anchors for single guy wires, they are used when in- The guy discs are made of galvanized steel. This gives the system excellent are used as anchors for multiple guy wires, they are used when installing a
stalling a mast on soil. They are available in many different versions corrosion resistance and a long life. mast on soil. We always supply you with the correct guy foundation for your

foundations & guy anchors


foundations & guy anchors

depending on guy wire dimension. We always supply you with the Cue Dee mast.
Easy Assembly
correct guy disc for your Cue Dee mast. The guy discs are light weight
The guy discs are light weight and easy to handle manually. Each guy disc is FLEXIBILITY
and therefore easy to transport to remote sites.
attached with a slack puller to the guy wire. It is possible to fit anywhere from 1 to 6 guy wires to the same guy founda-
FLEXIBILITY tion depending on guy wire dimension.
The guy discs are available from 620 mm (24,5 in) up to the square
QUALITY
disc 750 x 750 mm. (29,5 x 29,5 in)
The guy foundations are made of reinforced concrete and galvanized steel.
This gives the system excellent corrosion resistance and a long life.

Easy Assembly
The guy foundation comes complete with extension rods to connect to the
slack puller and guy wire.

Guy disc

WIND ACCESSORIES
WIND ACCESSORIES

product No: 5544

ORDER AND Technical information



FUNCTION DESCRIPTION: The guy disc is used as an anchor point for a single guy wire when installing the mast on
soil. The guy disc is made of galvanized steel.

Package dimensions: Length: Diameter: Max guy wire area: Weight:


2200 mm (86,5 in) 620 mm (24,5 in) 68 mm (0,10 sq in) 17 kg (37,5 lb)

supports & brackets


supports & brackets

Guy disc square


product No: 4738
ORDER AND Technical information
Drawing No: GP170-2011
ORDER AND Technical information FUNCTION DESCRIPTION: The guy foundation is used when the mast is installed on soil. It is possible to attach 1-6 guy wires to the
Drawing No: GPS50-1010 guy foundation as long as the total guy force does not exceed 170kN.

FUNCTION DESCRIPTION: The guy disc is used as an anchor point for a single guy wire when installing the mast on soil. Mechanical data: Maximum guy force: Weight:
The guy disc is made of galvanized steel. 170 kN 1230 kg (2712 lb)

Package dimensions: Length: width: Height: Weight:

rooftop solutions
rooftop solutions

Package dimensions: Length: Disc size: Max guy wire area: Weight:
2200 mm (86,5 in) 750 x 750 mm (29,5 x 29,5 in) 68 mm (0,10 sq in) 76 kg (168 lb) 2200 mm (86,5 in) 1400 mm (55 in) 220 mm (8,7 in) 1230 kg (2712 lb)

18 19

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


THE SLeePER guy anchor ROCK ANCHORS
PRODUCT No: 6907 Are used as anchors for single guy wires, they are used when installing a mast on bedrock
Rock anchors are available in many different dimensions depending on guy wire and bedrock quality.

The Sleepers anchor


Is used as a guy anchor when you have soil conditions on site. It has a higher
capacity then the guy disc (5544) but is no quite as strong as the concreate

Rock anchor/wedge 500 mm

foundations & guy anchors


foundations & guy anchors

foundation (5905)

Flexibility
product No: 1811
Depending on installation depth different guywires can be used up to a maxi-
mum of 142mm. When using the adapter plate (7434) multiple guy wires
ORDER AND Technical information
can be attached to the same guy anchor as long as the maximum guy force
is not exceeded (99 kN). Mechanical data: Forged steel. Fulfills SS-EN 50423 Max guy wire area: Weight:
52 mm (0,08 sq in) 2,7 kg (6 lb)
Quality
The sleeper is made of slow growing pine wood and is impregnated with Package dimensions: Length: Diameter: Weight:
500 mm (19,7 in) 25 mm (1,0 in) 2,7 kg (6 lb)
salt to achieve the longest lifespan possible and to be environment friendly.

Easy Assembly
Since the sleepers are made of wood they are light and easy to handle and
transport.

WIND ACCESSORIES
WIND ACCESSORIES

Rock anchor 25 L1500 mm


product No: 3018

Mutliple guy adapter plate ORDER AND Technical information


Optional 7434
Mechanical data: Forged steel. Fulfills SS-EN 50423 Max guy wire area: Weight:
142 mm (0,22 sq in) 6,7 kg (14,8 lb)

Package dimensions: Length: Diameter: Weight:


1500 mm (59 in) 25 mm (1,0 in) 6,7 kg (14,8 lb)

supports & brackets


supports & brackets

ORDER AND Technical information Rock Anchor 32 L1500 mm


PROD. No: 6907 product No: 4186
FUNCTION DESCRIPTION: The Sleepers guy anchor is used when you have soil conditions on site. It has a higher
capacity then the guy disc (5544) but is no quite as strong as the concreate foundation (5905) ORDER AND Technical information
Mechanical data: Maximum guy force: sliper Weight: Mechanical data: Forged steel. Fulfills SS-EN 50423 Max guy wire area: Weight:
99 kN 70 kg (154 lbs) 185 mm (0,29 sq in) 11,3 kg (25 lb)

Package dimensions: Length: width: Height: Weight: Package dimensions: Length: Diameter: Weight:

rooftop solutions
rooftop solutions

2600 mm (86,5 in) 210 mm (55 in) 200 mm (7,9 in) 94 kg (207 lbs) 1500 mm (59 in) 32 mm (1,3 in) 11,3 kg (25 lb)

20 21

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


ROCK guy foundation
PRODUCT No: 4081

ROCK GUY FOUNDATION


are used as anchors for multiple guy wires, they are used when installing a
mast on bedrock. We always supply you with the correct rock anchor for your

foundations & guy anchors


foundations & guy anchors

Cue Dee mast. Including 2 pcs of 1 m (3,3 ft) threaded rods.

FLEXIBILITY
It is possible to fit anywhere from 1 to 6 guy wires to the same guy founda-
tion depending on guy wire dimension.

QUALITY
The guy foundations are made of galvanized steel. This gives the system
excellent corrosion resistance and a long life.

Easy Assembly
Drill 2 holes 50 mm (2,0 in) wide and approximately 1000 mm (39 in) deep,
fill the holes with grout and insert the threaded rods. Extension rods are
available if the bedrock should be below ground level.

WIND ACCESSORIES
WIND ACCESSORIES

WIND
ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 30505023
We can supply you with various accessories for your wind measurement
mast such as climbing barriers and lightning rods.
FUNCTION DESCRIPTION: The rock guy foundation is used when the mast is installed on bedrock. It is possible to attach 1-6 guy wires to the
rock guy foundation as long as the total guy force does not exceed 350 kN if the bedrock is of good quality.

Mechanical data: Maximum guy force: Weight:


350 kN 24 kg (53 lb)

Package dimensions: Length: width: Height: Weight:

rooftop solutions
rooftop solutions

270 mm (10,5 in) 160 mm (6,3 in) 1000 mm (39 in) 24 kg (53 lb)

22 23

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

Wind measurement Boom Wind measurement boom

MASTS & TOWERS


3.7m (Tiltable) 5,1m
product No: 4329 PRODUCT No: 1923

The Tiltable Boom The Wind measurement Boom 5,1m

foundations & guy anchors


foundations & guy anchors

is designed for meteorological applications to study air quality and wind is designed for meteorological applications to carry measurement equip-
profiles. Frame leg clamping range 25-90 mm (1,0-3,5 in). Measurement ment. Frameleg clamping range 25-120 mm (1,0-4,7 in). Measurement
instrumentation is clamped at the end of the boom, clamping range 25- instrumentation is clamped at the end of the boom, clamping range depends
40 mm (1,0-1,6 in). For easy access to the measurement instrument it is on choice of clamp. Clamp needs to be ordered separately (order no 1818,
possible to tilt the boom into a vertical position. Designed according to IEC 1837, 5431 depending on clamp size).
61400-12-1.
Flexibility
Flexibility The wind measurement boom 5,1 m (16,7 ft) is designed to be installed on
The boom can be tilted up or down to gain access to the measurement masts and towers with a side no greater then 900 mm (35,5 in). The wind
equipment. Optional support wire (5194) or support legs (5411) to add extra measurement boom 5,1 m (16,7 ft) comes complete with a steel wire guy
rigidity. kit for extra rigidity.

Quality Quality
All components are made of anodized aluminium and stainless steel which All components are made of anodized aluminium and stainless steel which

WIND ACCESSORIES
gives the tiltable boom excellent corrosion resistance and a long life. gives the Wind measurement boom 5,1 m (16,7 ft) excellent corrosion resis-
WIND ACCESSORIES

tance and a long life.


Easy assembly
The choice of materials makes the product very light which makes handling Easy assembly
and installation very easy. The choice of materials makes the product very light which makes handling
and installation very easy.

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information
Drawing No: CD 990282
Drawing No: CD 990314
FUNCTION DESCRIPTION: The Wind measurement Boom 5,1m (16,7 ft) is designed for meteorological applications to study air quality and wind
FUNCTION DESCRIPTION: The tiltable boom is designed for meteorological applications to study air quality and wind profiles. Frame leg clamping profiles. Frame leg clamping range 25-120 mm. (1,0-4,7 in). Measurement instrumentation is clamped at the end of
range 25-90 mm (1,0-3,5 in). Measurement instrumentation is clamped at the end of the boom, clamping range the boom, clamping range depends on choice of clamp. Clamp needs to be ordered separately (order no 1818, 1837,
25-40 mm. (1,0-1,6 in) 5431 depending on clamp size).

MECHANICAL DATA: Mechanical data: Protruding from mast: wind area: clamping range: Weight:

rooftop solutions
Protruding from mast: wind area: clamping range: Weight:
rooftop solutions

3,7 m (12,1 ft) 0,4 m (4,3 sq ft) 25-90 mm (1,0-3,5 in) 18 kg (39,7 lb) 5,1 m (16,7 ft) 1,1 m (11,8 sq ft) 25-120 mm (1,0-4,7 in) 40,3 kg (88,8 lb)

24 25

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

Wind measurement boom 6m Top Spire K-600

MASTS & TOWERS


PRODUCT No: 2976 wITH Lightning Rod IEC
PRODUCT No: 7487

The Wind measurement boom 6m THE TOP SPIRE


is designed for meteorological applications to study air quality and wind pro- is designed for meteorological applications to study air quality and wind pro-
files. Frame leg clamping range depends on choice of clamp and needs to be files. It is designed to fullfill the requirements of the coming 2016 revision of

foundations & guy anchors


foundations & guy anchors

ordered separetely (order no 1818, 1837, 5431). Measurement instrumenta- the IEC-61400-12-1. Frame leg clamping range 25-90 mm (1,0-3,5 in). It
tion is clamped at the end of the boom, clamping range 25-40 mm (1,0- is possible to clamp measurement instrumentation at both ends of the beam,
1,6 in). Clamp needs to be ordered separately (order no 3072). clamping range 25-40 mm (1,0-1,6 in). Cup height 4,9 m above the mast
top to achived the IEC 1:11 cone. Distance between anemometers 2,5 m.
Flexibility
The wind measurement boom 6 m (19,7 ft) is designed to be installed on FLEXIBILITY
masts and towers with a side greater then 900 mm (35,5 in). The Top spire can be installed on masts with a side width of 600 mm (23,5
in), it comes with a built in safety hook system and follows the latest IEC
Quality
standard. Top spires for other mast sizes are available on request.
All components are made of anodized aluminium and stainless steel which
gives The wind measurement boom 6 m (19,7 ft) excellent corrosion resis- QUALITY
tance and a long life. All components are made of anodized aluminum and stainless steel which
gives the Top spire excellent corrosion resistance and a long life.
Easy assembly
The choice of materials makes the product very light which makes handling EASY ASSEMBLY

WIND ACCESSORIES
WIND ACCESSORIES

and installation very easy. The choice of materials makes the product very light which makes handling
and installation very easy. The top spire should be installed diagonally in the
mast. If a manhole section is used in the bottom of the mast and as the sec-
tion below the top section, the mast can be climbed on the inside.

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information
Drawing No: CD 990269
Drawing No: CD 990997
FUNCTION DESCRIPTION: The Wind measurement boom 6 m (19,7 ft) is designed for meteorological applications to study air quality and wind
profiles. Frame leg clamping range depends on choice of clamp and needs to be ordered separately (order no FUNCTION DESCRIPTION: The Top Spire is especially designed for meteorological applications to study air quality and wind profiles.
1818, 1837, 5431). Measurement instrumentation is clamped at the end of the boom, clamping range It is meant to be used together with Cue Dees K-Mast system. This model is designed to comply the new
25-40 mm (1,0-1,6 in). Clamp needs to be ordered separately (order no 3072). coming IEC norm.

Mechanical data: Protruding from mast: wind area: clamping range: Weight: MECHANICAL DATA: HEIGTH ABOVE MAST: WIND AREA: CLAMPING RANGE: WEIGHT:

rooftop solutions
rooftop solutions

6 m (19,7 ft) 0,9 m (9,7 sq ft) 25-120mm (1,0-4,7 in) 52,8 kg (116 lb) 3,65 m (12 ft) 1,12 m2 25-90 mm (1,0-3,5 in) 51,9 kg (114 lb)

26 27

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

2 Way Boom Support

MASTS & TOWERS


Top Spire K-600
wITH Lightning Rod PRODUCT No: 5411

PRODUCT No: 7021

THE TOP SPIRE The 2 way boom support


is designed for meteorological applications to study air quality and wind pro- is designed to add extra rigidity to our 3.7m tiltable wind measurement boom
files. It is designed to fullfill the requirements of the coming 2016 revision of (4329). We recommend using the boom support when there is risk a of

foundations & guy anchors


foundations & guy anchors

the IEC-61400-12-1. Frame leg clamping range 25-90 mm (1,0-3,5 in). It heavy icing.
is possible to clamp measurement instrumentation at both ends of the beam,
Flexibility
clamping range 25-40 mm (1,0-1,6 in). A lightning rod is placed in the
The 2 way boom support is designed to be installed on the K-600 mast, to
center reaching 2,47 meters (8,1 ft) above the horizontal boom to protect the
easily level the boom anenometer the vertical support strutt is equipped with
instruments from lightning strikes.
a turnbuckle.
FLEXIBILITY
Quality
The Top spire can be installed on masts with a side width of 600 mm (23,5
All components are made of anodized aluminium and stainless steel which
in), it comes with a built in safety hook system and follows the latest IEC
gives the 2 way boom support excellent corrosion resistance and a long life.
standard. Top spires for other mast sizes are available on request.
Easy assembly
QUALITY
The choice of materials makes the product very light which makes handling
All components are made of anodized aluminum and stainless steel which
and installation easy.
gives the Top spire excellent corrosion resistance and a long life.

WIND ACCESSORIES
EASY ASSEMBLY
WIND ACCESSORIES

The choice of materials makes the product very light which makes handling
and installation very easy. The top spire should be installed diagonally in the
mast. If a manhole section is used in the bottom of the mast and as the sec-
tion below the top section, the mast can be climbed on the inside.

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information
Drawing No: CD 990916
Drawing No: CD 990555
FUNCTION DESCRIPTION: The top spire is designed for meteorological applications to study air quality and wind profiles. It is possible to clamp
measurement instrumentation at both ends of the beam, clamping range 25-40 mm (1,0-1,6 in). Frame leg clam- FUNCTION DESCRIPTION: The 2 way boom support consists of 2 aluminium tubes that are clamped to the wind boom and mast.
ping range 25-90 mm (1,0-3,5 in). The support adds extra rigidity and bending resistance to the boom.

MECHANICAL DATA: HEIGTH ABOVE MAST: WIND AREA: CLAMPING RANGE: WEIGHT: Mechanical data: Height: wind area: clamping range: Weight:

rooftop solutions
rooftop solutions

3,16 m (10,4 ft) 1,0 m2 25-90 mm (1,0-3,5 in) 44,1 kg (97 lb) 2,5 m (8,2 ft) 0,27 m (2,9 sq ft) 25-60 mm (1,0-2,4 in) 8,9 kg (19,6 lb)

28 29

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Boom wire support Gauge Holders and Brackets
PRODUCT No: 5194
Gauge holders Quality
are available for all the major anemometer brands and other common All components are made of anodized aluminium and stainless steel
Boom wire support wind measurement equipment such as wind vanes and ice monitors which gives the gauge holders excellent corrosion resistance and a long
is designed to add extra rigidity to our wind measurement booms. We recom- etc. life.
mend using the boom support when there is risk of heavy icing.
Flexibility Easy assembly

foundations & guy anchors


foundations & guy anchors

Flexibility The gauge holders are available in both aluminium and stainless steel. The choice of materials makes the product very light which makes
The boom wire support is designed to be installed on the K-600. A turnbuckle We can also offer the gauge holders in custom cut lengths to fit your handling and installation very easy.
is included in the wire support to simplify leveling of boom and anemometer. needs.

Quality
All components are made of anodized aluminum and stainless steel which VAISALA ADAPTER
gives the boom wire support excellent corrosion resistance and a long life.
product No: 2598
Easy assembly
The choice of materials makes the product very light which makes handling ORDER AND Technical information
and installation very easy.
Drawing No: CD 990219

Package dimensions: Length: Diameter : Weight:


1000 mm (39,4 in) 40 mm (1,6 in) 1 kg (2,2 lb)

WIND ACCESSORIES
WIND ACCESSORIES

800 mm

THIES ADAPTER
33,7x2,6 mm
product No: 3023

ORDER AND Technical information


ORDER REFERENCE: product no: 3023

Package dimensions: Length: Diameter : Weight:

supports & brackets


800 mm (31,5 in) 33,7 x 2,6 mm (1,3 x 0,10 in) 1,6 kg (3,5 lb)
supports & brackets

800 mm

NRG ADAPTER
ORDER AND Technical information 26,9x2 mm
product No: 4840
Drawing No: CD 990314-90

FUNCTION DESCRIPTION: The boom wire support consists of a steel wire and 2 clamps that are attached to the wind boom and mast.
ORDER AND Technical information
The support adds extra rigidity to the boom. ORDER REFERENCE: product no: 4840

Mechanical data: Height: wind area: clamping range: Weight: Package dimensions: Length: Diameter : Weight:

rooftop solutions
rooftop solutions

2,5 m (8,2 ft) 0,05 m (0,54 sq ft) 25-40/45-60 mm (1,0-1,6/1,8-2,4 in) 1 kg (2,2 lb) 800 mm (31,5 in) 26,9 x 2 mm (1,06 x 0,08 in) 1 kg (2,2 lb)

30 31

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Climbing Barrier k-600 Climbing Barrier k-900
PRODUCT No: 1583 PRODUCT No: 1709

The Climbing Barrier The Climbing Barrier


is designed to prevent unauthorized personnel from gaining access to the is designed to prevent unauthorized personnel from gaining access to the
mast and causing damage to the installed equipment or from injuring them- mast and causing damage to the installed equipment or from injuring them-

foundations & guy anchors


foundations & guy anchors

selves. selves.

Flexibility Flexibility
The Climbing Barrier is available for the K-600 and K-900 masts. Barriers for The Climbing Barrier is available for the K-600 and K-900 masts. Barriers for
other mast sizes are available on request. other mast sizes are available on request.

Quality Quality
All components are made of galvanized and stainless steel which gives the All components are made of galvanized and stainless steel which gives the
Climbing Barrier high strength and excellent corrosion resistance. Climbing Barrier high strength and excellent corrosion resistance.

Easy assembly Easy assembly


The gate in the barrier is designed for fast and easy assembly/disassembly The gate in the barrier is designed for fast and easy assembly/disassembly
for full access to the mast. for full access to the mast.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 431135 Drawing No: CD 441135

FUNCTION DESCRIPTION: The Climbing barrier is a galvanized steel obstacle consisting of four sides and one center piece. FUNCTION DESCRIPTION: The Climbing barrier is a galvanized steel obstacle consisting of four sides and one center piece.
It is designed to keep unauthorized personnel from gaining access to the mast. It is designed to keep unauthorized personnel from gaining access to the mast.

Mechanical data: Protruding from mast: clamping range: Weight: Mechanical data: Protruding from mast: clamping range: Weight:
485 mm (19 in) 25-40 mm (1,0-1,6 in) 23 kg (51 lb) 485 mm (19 in) 25-40 mm (1,0-1,6 in) 30,4 kg (67 lb)

rooftop solutions
Package dimensions: Length: width: Height: Weight: Package dimensions: Length: width: Height: Weight:
rooftop solutions

1245 mm (49 in) 500 mm (19,7 in) 250 mm (10 in) 23 kg (51 lb) 1497 mm (59 in) 798 mm (31,5 in) 250 mm (10 in) 30,4 kg (67 lb)

32 33

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Lightning Rods Wind turbine SupportS
PRODUCT No: 1574

Lightning rods Wind turbine supports


are designed to protect your instruments from lightning strikes. are used to attach small wind turbines to the mast, with a solution like this
you always have access to electricity on the site.
Flexibility

foundations & guy anchors


foundations & guy anchors

Lightning rods are available for the K-600 and K-900 masts as well as the Flexibility
Alma mast. The lightning rods are available in heights from 2-4,5 m (6,5- Wind turbine supports are available for the K-600 and K-900 masts.: Turbine
14,8 ft). However our standard lightning rod is 2 m (6,5 ft), other heights are adapter tube 60 mm (2,4 in). Turbine supports for larger turbines and other
available upon request. adapter diameters are available upon request.

Quality Quality
All components are made of galvanized and stainless steel which gives the All components are made of aluminium and stainless steel which gives the
lightning rods excellent corrosion resistance. wind turbine supports excellent corrosion resistance.

Easy assembly Easy assembly


The lightning rods should be installed at the very top of the mast, either The wind turbine supports are clamped to the frame legs of the mast using
clamped to the frame leg or clamped to the foot plate of the section. our universal clamp for a fast and easy assembly.

WIND ACCESSORIES
wind turbine holder K-600
WIND ACCESSORIES

product No: 3056

ORDER AND Technical information


Drawing No: CD 990492

Function description: A support designed to hold a small wind turbine.

Mechanical data: Length: wind area: Weight:


2 m (79 in) 0,34 m (3,7 sq ft) 17,4 kg (38,5 lb)
Package dimensions: Length: width: Height: Weight:
Package 1 2000 mm (79 in) 75 mm (3,0 in) 135 mm (5,5 in) 10,7 kg (23,6 lb)

supports & brackets


supports & brackets

Package 2 290 mm (11,5 in) 95 mm (3,7 in) 95 mm (3,7 in) 6,7 kg (14,8 lb)

wind turbine holder K-900


product No: 3065
ORDER AND Technical information
ORDER REFERENCE: product No: K-600 1574 product No: K-900 1574 Product No: ALMA 1574 ORDER AND Technical information
Drawing No: CD 339000 Drawing No: CD 339000 Drawing No: CD 990293
Drawing No: CD 990642
FUNCTION DESCRIPTION: Lightning rods are installed to protect your instruments from lightning strikes. They should be installed at the very top Function description: A support designed to hold a small wind turbine.
of the mast, bolted to the foot plate of the top mast section with 2 bolts either clamped to the frame leg or clamped to
the foot plate of the section. Mechanical data: Length: wind area: Weight:
2,5 m (8,2 ft) 0,4 m (4,3 sq in) 19,7 kg (43,5 lb)
Mechanical data: Length: wind area: Weight:

rooftop solutions
rooftop solutions

2 m (6,5 ft) 0,06 m (0,65 sq ft) 2 kg (4,5 in) Package dimensions: Length: width: Height: Weight:
Package 1 2500 mm (8,2 ft) 75 mm (3,0 in) 135 mm (5,5 in) 13 kg (28,7 lb)
Package 2 290 mm (11,5 in) 95 mm (3,8 in) 95 mm (3,8 in) 6,7 kg (14,8 lb)

34 35

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


slack pullers Guy Wire marking
product No: 3022
PRODUCT No: 1471 / 4276 / 1472 / 5436 / 2182 / 5437 / 5358

SLACK PULLER
Slack pullers are used to attach the guy wires to the mast and to the guy ORDER AND Technical information
foundation. ORDER REFERENCE: product no: 3022

foundations & guy anchors


foundations & guy anchors

FLEXIBILITY FUNCTION DESCRIPTION: Guy wire markings are fitted to the guy wires to increase their visibility at ground
Slack pullers are available in many different versions and sizes. We can pro- level. The markings are plastic tubes in two colors: black and yellow. Each kit contains
vide you with slack pullers suitable from 25 mm (0,04 sq in) up to 284 mm 8 markers (4 of each color) L=200 mm (7,9 in)

(0,44 sq in) guy wires.

QUALITY
The slack puller wedge and wedge housing are made of nodular cast iron,
the U-bolt is made of steel. All parts are galvanized, this gives them excellent
corrosion resistance and a long life. Warning flags
product No: 1980
EASY ASSEMBLY
Follow the steps in the installation manual.

WIND ACCESSORIES
ORDER AND Technical information
WIND ACCESSORIES

ORDER REFERENCE: product no: 1980

FUNCTION DESCRIPTION: The warning flags are fitted to the guy wires to increase their visibility.
The warning flags are bright red in colour and 400 x 100 mm. (15,7 x 4,0 in)

supports & brackets


supports & brackets

ORDER AND Technical information


FUNCTION DESCRIPTION: Slack pullers are used to fasten the guy wires to the mast and guy foundations.
Different slack puller sizes are available depending on guy wire dimension.

Mechanical data: Prod no: Size: Fits guy wires: Length: Rec max guy force:
1471 M16 25-68 mm (0,04-0,10 sq in) * 300 mm (12,0 in) 47 kN
4276 M16 25-68 mm (0,04-0,10 sq in) * 800 mm (31,5 in) 47 kN
1472 M20 68-105 mm (0,10-0,16 sq in) ** 350 mm (13,8 in) 72 kN
5436 M20 68-105 mm (0,10-0,16 sq in) ** 800 mm (31,5 in) 72 kN
2182 M24 105-142 mm (0,16-0,22 sq in) 425 mm (16,7 in) 100 kN
5437 M24 105-142 mm (0,16-0,22 sq in) 800 mm (31,5 in) 100 kN
5358 M27 185-284 mm (0,29-0,44 sq in) 425 mm (16,7 in) 200 kN

rooftop solutions
rooftop solutions

* Cue Dee recommend using the larger M20 Slack Puller for the 68 mm2 wire for easier installation.
** Cue Dee recommend using the larger M24 Slack Puller for the 105 mm2 wire for easier installation.

36 37

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


CHAIN BRACKET
product No: 7685, 7706, 7664, 7707

CHAIN BRACKET
is a fastening system for installation of telecom equipment or other type of
equipment on monopoles or round poles.

FLEXIBILITY
The Chain Bracket can be installed on any pole from 110 mm up to 1070
mm. A wide range of accessory mounts are available for mounting tubes,

foundations & guy anchors


foundations & guy anchors

RRU:s, filters etc. even for compensation of inclination when installing on


conical monopoles.

Quality
All components are made of anodized aluminum and acid proof stainless
steel which gives the support excellent corrosion resistance.

Easy assembly
Handling and installation is very easy because of its light weight but also
thanks to the pre-assembled kit system and the facile tightening process.

WIND ACCESSORIES
WIND ACCESSORIES

SUPPORT
ORDER AND Technical information
Drawing No: CD 991019

FUNCTION DESCRIPTION: The chain bracket is an innovative mounting solution for large poles, chimneys etc. with a diameter
over 110 mm. It comes with a full range of accessories such as brackets for RRUs, antennas, filters etc.

AND BRACKETS

supports & brackets


supports & brackets

Mechanical data
Link and tensioner profiles: Aluminum, nature anodized 20m
Link plates and fasteners: Acid proof stainless steel

PERFORMANCE FOR ONE LEVEL OPERATIONAL WIND SPEED MAX SIDE WIND AREA * MAX LOAD WEIGHT **
km/h m/s mph m2 ft2 kg lb
240 67 150 0,4 4,3 330 730
CUE DEE has a number of different supports and brackets. To name a few we have Antenna 210 58 130 0,5 5,5 330 730
180 50 112 0,7 7,5 330 730
and Microwave link supports, RRU Supports, Wall Supports, Flexi Supports etc. 150 42 93 1,0 11 330 730
120 33 75 1,5 16 330 730
*) Max side wind area for each mounted equipment and for each level **) Max load weight for each level

Package dimensions Length Width Height Weight


Art.No Description mm (in) mm (in) mm (in) kg (lb)
7685 Link Set (1 link) 110 (4,3) 60 (2,4) 85 (3,3) 0,35 (0,8)

rooftop solutions
rooftop solutions

7706 Basic Set #1 (3 links) 250 (9,8) 110 (4,3) 85 (3,3) 2,0 (4,4)
7664 Basic Set #2 (6 links) 400 (15,7) 100 (4,0) 85 (3,3) 3,0 (6,6)
7707 Basic Set #3 (9 links) 400 (15,7) 150 (5,9) 85 (3,3) 4,0 (8,8)

38 39

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


CHAIN BRACKET
Chain Bracket RRU Holder SMALL CELL HOLDER
product No: 7798
product No: 7689
CHAIN BRACKET RRU HOLDER
is designed for installation of one RRU unit on Cue Dee Chain Bracket. It fits Ericsson,
CHAIN BRACKET SMALL CELL HOLDER
Huawei and NSN RRU models.
is designed for installation of one NSN Small Cell unit on Cue
Dee Chain Bracket together with the Small Cell Bracket.
FLEXIBILITY

foundations & guy anchors


foundations & guy anchors

Together with the Cue Dee Chain Bracket the RRU Holder can be installed on any pole
FLEXIBILITY
from 110 mm up to 1070 mm.
Together with the Cue Dee Chain Bracket the Small Cell Hol-
By orienting the plates either inwards or outwards the RRU Holder can fit either Erics-
der can be installed on any pole from 110 mm up to 1070
son, Huawei or NSN RRU units.
mm.

Since Chain Bracket is designed with several profile elements around the pole You can
Since Chain Bracket is designed with several profile elements
easily hook on additional RRU units around the pole in the same level by just adding
around the pole You can easily hook on additional Small Cell
RRU Holders.
units around the pole in the same level by just adding Small
Cell Holders.
QUALITY
All components are made of acid proof stainless steel which gives the support excel-
QUALITY
lent corrosion resistance.
All components are made of acid proof stainless steel which
gives the support excellent corrosion resistance.
EASY ASSEMBLEY
Installation is very easy thanks to the hook-on design and the cup head square neck

WIND ACCESSORIES
bolts which give you a free hand when tightening the nuts.
WIND ACCESSORIES

ORDER AND Technical information


Drawing No: 991075

Function description: Small Cell Holder for installation of one NSN Small Cell unit on Cue Dee Chain Bracket. Together with the Cue Dee

supports & brackets


supports & brackets

Chain Bracket it can be mounted on large poles, monopoles, chimneys etc. with a diameter over 110 mm.
ORDER AND Technical information
Mechanical data:
Drawing No: 991087 Plates: Acid proof stainless steel
Fasteners: Acid proof stainless steel
Function description: RRU Holder for installation of one Ericsson, Huawei or NSN RRU unit on Cue Dee Chain Bracket. Together with the
Cue Dee Chain Bracket it can be mounted on large poles, monopoles, chimneys etc. with a diameter over 110mm PERFORMANCE MAX WIND SPEED
km/h m/s mph
Mechanical data: With RRU unit 240 67 150
Plates: Acid proof stainless steel
Fasteners: Acid proof stainless steel Package dimensions Length Width Height Weight
85 mm (3,4 in) 55 mm (2,2 in) 35 mm (1,4 in) 0,5 kg (1,1 lb)
PERFORMANCE MAX WIND SPEED
km/h m/s mph ACCESSORIES P/N
With RRU unit 240 67 150 7685 Chain Bracket, Link Set (1 link)
7706 Chain Bracket, Basic Set #1 (3 links)

rooftop solutions
rooftop solutions

Package dimensions Length Width Height Weight 7664 Chain Bracket, Basic Set #2 (6 links)
290 mm (11,4 in) 80 mm (3,6 in) 85 mm (3,3 in) 1,5 kg (3,3 lb) 7707 Chain Bracket, Basic Set #3 (9 links)
7611 Small Cell Bracket

40 41

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com

Chain Bracket Tube Holder Chain Bracket Tube Holder Ext.


MASTS & TOWERS

MASTS & TOWERS


product No: 7682 product No: 7684

Chain Bracket Tube Holder Chain Bracket Tube Holder


is designed for installation of 60 mm mounting tubes in 2 levels as an ac- is designed for installation of 60 mm mounting tubes in 2 levels as an ac-
cessory to the Chain Bracket system. cessory to the Chain Bracket system.

Flexibility Flexibility
Together with the Cue Dee Chain Bracket the Tube Holder can be installed Together with the Cue Dee Chain Bracket the Tube Holder can be installed
on any pole from 110 mm up to 1070 mm. The Tube Holder is delivered on any pole from 110 mm up to 1070 mm. The Tube Holder is delivered

foundations & guy anchors


foundations & guy anchors

as a set with 1pc upper holder and 1pc lower holder. as a set with 1pc upper holder and 1pc lower holder.
The upper holder is designed with oblong holes in both horizontal directions The upper holder is designed with oblong holes in both horizontal directions
to allow an exact vertical mounting of the mounting tube even when instal- to allow an exact vertical mounting of the mounting tube even when instal-
ling on conical monopoles. ling on conical monopoles.
Since Chain Bracket is designed with several profile elements around the Since Chain Bracket is designed with several profile elements around the
pole You can easily install 2 or 3 antennas around the pole in the same level pole You can easily install 2 or 3 antennas around the pole in the same level
by just adding Tube Holders. by just adding Tube Holders.

QUALITY QUALITY
All components are made of acid proof stainless steel which gives the sup- All components are made of acid proof stainless steel which gives the sup-
port excellent corrosion resistance. port excellent corrosion resistance.

EASY ASSEMBLEY EASY ASSEMBLEY


Installation is very easy thanks to its flexible design and the cup head Installation is very easy thanks to its flexible design and the cup head
square neck bolts which gives you a free hand when tightening the bolts. square neck bolts which gives you a free hand when tightening the bolts.

WIND ACCESSORIES
WIND ACCESSORIES

Upper Lower

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 991072 Drawing No: CD 991073

supports & brackets


supports & brackets

FUNCTION DESCRIPTION: Tube holder for Chain Bracket in 2 levels for installing 60 mm mounting tubes FUNCTION DESCRIPTION: Tube holder for Chain Bracket in 2 levels for installing 60 mm mounting tubes
on any pole or monopole larger than 110 mm. on any pole or monopole larger than 110 mm.

Mechanical data Mechanical data


Plates: Acid proof stainless steel Plates: Acid proof stainless steel
Fasteners: Acid proof stainless steel Fasteners: Acid proof stainless steel

PERFORMANCE OPERATIONAL WIND SPEED MAX SIDE WIND AREA MAX LOAD WEIGHT PERFORMANCE OPERATIONAL WIND SPEED MAX SIDE WIND AREA MAX LOAD WEIGHT
km/h m/s mph m2 ft2 kg lb km/h m/s mph m2 ft2 kg lb
240 67 150 0,8 8,6 100 220 240 67 150 0,3 3,4 70 150
210 58 130 1,0 11 100 220 210 58 130 0,4 4,4 70 150
180 50 112 1,4 15 100 220 180 50 112 0,55 6,0 70 150
150 42 93 2,0 22 100 220 150 42 93 0,8 8,8 70 150
120 33 75 3,0 32 100 220 120 33 75 1,2 13 70 150

rooftop solutions
rooftop solutions

Package dimensions Length Width Height Weight Package dimensions Length Width Height Weight
250 mm (9,8 in) 110 mm (4,3 in) 85 mm (3,3 in) 2,0 kg (4,4 lb) 400 mm (15,7 in) 150 mm (5,9 in) 85 mm (3,3 in) 3,4 kg (7,5 lb)

42 43

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


RRU Light Pole Mount
product No: 7360
RRU DOUBLE LIGHT POLE MOUNT
product No: 7483

RRU LIGHT POLE MOUNT RRU DOUBLE LIGHT POLE MOUNT


is designed for installation of one RRU unit on mast, towers or other vertical is designed for installation of two RRU units on mast, towers or other
structures. vertical structures.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The support can be installed on a wide range of all common vertical structu- The support can be installed on a wide range of all common vertical struc-
res such as round, square, angle etc. tures such as round, square, angle etc.

Quality
Quality
All components are made of anodized aluminum and acid proof stainless
All components are made of anodized aluminum and acid proof stainless
steel which gives the support excellent corrosion resistance.
steel which gives the support excellent corrosion resistance.
Easy assembly
Easy assembly Handling and installation is very easy thanks to its light weight but also
Handling and installation is very easy thanks to its light weight but also thanks to its clever design with elongated opening holes allowing the clamp
thanks to its clever design with elongated opening holes allowing the clamp to be opened and closed without any loose parts which rapidly speeds up
to be opened and closed without any loose parts which rapidly speeds up the installation.
the installation.

WIND ACCESSORIES
WIND ACCESSORIES

ORDER AND Technical information


Drawing No: CD 990990

supports & brackets


supports & brackets

FUNCTION DESCRIPTION: RRU Light Pole Mount for installation on mast, tower or other vertical structures. Fits all common RRU:s in Ericsson
RRU family and other units with horizontal distance c/c 146 mm (5 ) of the attachment points M10 on the back-
side of the unit such as RBS, PBC, GPE etc. ORDER AND Technical information
Mechanical data Drawing No: CD 991007
Link and tensioner profiles: Aluminum, nature anodized 20m
Link plates and fasteners: Acid proof stainless steel FUNCTION DESCRIPTION: RRU Double Light Pole Mount for installation on mast, tower or other vertical structures. Fits all common
RRU:s in Ericsson RRU family and other units with horizontal distance c/c 146 mm (5 ) of the attach-
MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle: ment points M10 on the backside of the unit such as RBS, PBC, GPE etc. (RRU not included)

MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle


Minimum 25 mm (1,0 in) 35 x 35 (1,4 x 1,4 in) 35 x 35 (1,4 x 1,4 in) 40 mm (1,6 in) opening
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening
Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening
Package dimensions Length Width Height Weight Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening

rooftop solutions
rooftop solutions

375 mm (14,8 in) 95 mm (3,8 in) 47 mm (1,9 in) 2,0 kg (4,4 lb) Package dimensions: Length: Width: Height: Weight:
300 mm (11,8 in) 95 mm (3,7 in) 95 mm (3,7 in) 3,0 kg (6,6 lb)
NOTE! RRU is not included.

44 45

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


OFFSET SUPPORT
product No: 7530
LIFTING DEVICE
product No: 7818

OFFSET SUPPORT
is designed for installation of one antenna together with RRU units on masts, towers
or other vertical structures.

FLEXIBILITY
The support can be installed on a wide range of all common vertical structures such
as round, square, angle etc. It can be adjusted and complemented with accessories in

foundations & guy anchors


foundations & guy anchors

order to get a perfect adaption to the site.

Quality
All components are made of anodized aluminum and acid proof stainless steel which
gives the support excellent corrosion resistance.

EASY ASSEMBLY
Handling and installation is very easy thanks to its light weight but also thanks to its
clever design allowing the clamp to be opened and closed without any loose parts
which significantly speeds up the installation.

WIND ACCESSORIES
LIFTING DEVICE
WIND ACCESSORIES

is an aid designed to facilitate lifting Cue Dee Offset Support during instal-
lation.

FLEXIBILITY
The Lifting Device allows the Offset Support tube to be positioned in several
different positions.
ORDER AND Technical information
QUALITY
Drawing No: CD 991022
All components are made of anodized aluminium, acid proof stainless steel
FUNCTION DESCRIPTION: Offset Support for installation of one antenna together with RRU units on masts, towers or other vertical structures. or galvanized steel which gives the support good corrosion resistance.

Mechanical data
Clamp profiles: Aluminium, nature anodized 20m ORDER AND Technical information

supports & brackets


supports & brackets

Beams: Aluminium, nature anodized 20m


Fasteners: Acid proof stainless steel Drawing No: 991047

MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle: FUNCTION DESCRIPTION: Lifting Device to facilitate lifting and installingCue Dee Offset Support.

Mechanical data
Minimum: 30 mm (1,2 in) 35 x 35 (1,4 x 1,4 in) 35 x 35 (1,4 x 1,4 in) 40 mm (1,6 in) opening Profiles: Aluminium, nature anodized 20m
Maximum: 155 mm (6,0 in) 110 x 110 mm (4,3 x 4,3 in) 110 x 110 mm (4,3 x 4,3 in) 140 mm (5,5 in) opening Fasteners: Acid proof stainless steel
Schackle: Galvanized steel
Package dimensions Length Width Height Weight
375 mm (14,8 in) 95 mm (3,8 in) 47 mm (1,9 in) 2,0 kg (4,4 lb) PERFORMANCE:
Max weight: 1500 kg
ACCESSORIES P/N
1994 Mounting tube AL 75 x 5, L=3000 * Package dimensions Length Width Height Weight
2009 Mounting tube AL 90 x 5, L=3000 * *) Mounting tubes and double side strut are available in other lengths. 755 mm (30 in) 130 mm (5,1 in) 85 mm (3,3 in) 5,0 kg (11,0 lb)
7200 Safety stop 75 **) Double side strut is recommended if:
7563 Safety stop 90 1) Frame leg dimension is smaller than L70x70mm / 30mm. ACCESSORIES P/N

rooftop solutions
rooftop solutions

7741-30 Double side strut, L=3000 *,** 2) Load weight is above 110 kg.
7530 Offset Support

46 47

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


small cell BRACKET
product No: 7611
SINGLE RADIO MOUNT
product No: 7773

THE SINGLE RADIO MOUNT


SMALL CELL BRACKET Is designed for installation of one Ericsson radio unit on vertical structures.
is designed for installation of one NSN Small Cell unit on wall or vertical
structures. FLEXIBILITY

foundations & guy anchors


foundations & guy anchors

The Single Radio Mount fits all common units in Ericssons radio family and
FLEXIBILITY other units that have the hole pattern shown here below. Thanks to its design
The Small Cell Bracket allows the Small Cell unit to be tilted up to 15 degrees the Single Radio Mount can handle a wide range of all common frame leg
and panned up to 30 degrees. The bracket is prepared to be mounted to a designs, round, square, angel etc.
wide range of vertical structures by using hose clamps. Together with the
Chain Bracket Small Cell Holder it can be mounted on the Cue Dee Chain QUALITY
Bracket system. All components are made of anodized aluminium or acid proof stainless steel
which gives the support excellent corrosion resistance.
QUALITY
All components are made of anodized aluminium or acid proof stainless steel EASY ASSEMBLY
which gives the support excellent corrosion resistance. Handling and installation is extremely easy thanks to its design with hook
on attachments and also due to the light weight of material.
EASY ASSEMBLY
Installation is very easy thanks to its flexible design and the cup head square
neck bolt which gives you a free hand when tightening the bolts.

WIND ACCESSORIES
WIND ACCESSORIES

ORDER AND Technical information

supports & brackets


supports & brackets

Drawing No: CD 991098

FUNCTION DESCRIPTION: Single Radio Mount for installation of one Ericsson RRU on vertical structures. Fits all common units in
ORDER AND Technical information Ericssons radio family and other units that utilizes the same hole pattern.
Drawing No: CD 991048
MOUNTING span TUBES SQUARE PROFILES 90 ANGLE 60 ANGLE
FUNCTION DESCRIPTION: Small Cell Bracket for installation of one NSN Small Cell unit on wall or vertical structures.

Mechanical data Minimum: 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm opening (1,6 in opening)
Profiles: Aluminium, nature anodized 20m Maximum: 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm opening (4,0 in opening)
Fasteners: Acid proof stainless steel
Mechanical data
Package dimensions Length Width Height Weight Link and tensioner profiles: Aluminum, nature anodized 20m
145 mm (5,7 in) 105 mm (4,1 in) 85 mm (3,3 in) 0,8 kg (1,76 lb) Link plates and fasteners: Acid proof stainless steel
ACCESSORIES P/N Package dimensions Length Width Height Weight

rooftop solutions
rooftop solutions

7689 Chain Bracket Small Cell Holder 180 mm (7 in) 100 mm (4,0 in) 90 mm (3,6 in) 1,1 kg (2,4 lb)
NOTE! 4 pcs of M8 bolts for one RRU is included in the Single Radio Mount.

48 49

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Multi Radio Mount Half Pipe Enclosure ONLY FITS
NOKIA EQUIPMENT

product No: 7700


700/1000 mm
THE MULTI RADIO MOUNT
product No: 7113-700, 7113-1000
Is designed for installation of up to three Ericsson rrus on wall or vertical
structures.

FLEXIBILITY

foundations & guy anchors


foundations & guy anchors

The Multi radio Mount fits all common units in Ericssons radio family and
The Half Pipe Enclosure
is a mounting system used when you want to conceal a small cell site, foliate
other units that have the hole pattern shown below. Due to its design the
the radome to make the site blend in to the surroundings. It is possible to
Multi Radio Mount has mounting options on 3 sides, just like the radio unit
mount on almost any structure such as walls, traffic lights, flag poles etc.
has. This gives a tremendous number of installation possibilities which can
be good in case there is lack of space.
Flexibility
The Half Pipe Enclosure is the perfect installation base for Nokia Flexi Lite
QUALITY
BTS, Nokia Flexi Zone outdoor Micro & Pico BTS, Nokia Nano BBU, Nokia
All components are made of anodized aluminum or acid proof stainless steel
Harmony Lite and many other Nokia solutions.
which gives the support excellent corrosion resistance.

EASY ASSEMBLY Quality


All components are made of anodized aluminium and acid proof stainless
Handling and installation is extremely easy thanks to its design with hook
steel which gives the enclosure excellent corrosion resistance. The plastic
on attachments and also due to the light weight of material. The attached
radome is made by UV-stabilized ABS plastic.
drill template further simplifies installation.

Easy Assembly

WIND ACCESSORIES
WIND ACCESSORIES

Installation is done on the ground, the entire enclosure is then lifted in place
for easy installation.

ORDER AND Technical information

supports & brackets


supports & brackets

Drawing No: CD 991090

FUNCTION DESCRIPTION: Multi Radio Mount for installation of up to three Ericsson RRUs on wall or vertical structures.
Fits all common units in Ericsson radio family and other units that utilizes the same hole patterns. ORDER AND Technical information
Drawing No: CD 990952-70 / CD 990952-100
MOUNTING span TUBES SQUARE PROFILES 90 ANGLE 60 ANGLE
Function description: A mounting system used to conceal a small cell site on almost any structure
such as walls, traffic lights, flag poles etc.
Minimum: 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm opening (1,6 in opening)
Maximum: 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm opening (4,0 in opening) mounting span: Tubes Square profiles 90 Angle 60 Angle

Mechanical data
Link and tensioner profiles: Aluminum, nature anodized 20m Minimum 25 (1,0 in) 35 x 35 (1,4 x 1,4 in) 35 x 35 (1,4 x 1,4 in) 40 mm (1,6 in) opening
Link plates and fasteners: Acid proof stainless steel Maximum 120 (4,7 in) 90 x 90 (3,5 x 3,5 in) 90 x 90 (3,5 x 3,5 in) 100 mm (4,0 in) opening

Package dimensions Length Width Height Weight Package dimensions Length Width Height Weight

rooftop solutions
rooftop solutions

286 mm (11,2 in) 188 mm (7,4 in) 80 mm (3,1 in) 1,8 kg (4,0 lb) 7113-700 Half Pipe Enclosure 700 mm 700 mm (27,5 in) 460 mm (18,1 in) 360 mm (14,2 in) 13 kg (28,5 lb)
7113-1000 Half Pipe Enclosure 1000 mm 1000 mm (39,4 in) 460 mm (18,1 in) 360 mm (14,2 in) 16 kg (35 lb)
NOTE! 4 pcs of M8 bolts for one RRU is included in the Multi Radio Mount. When installing 2 or 3 units extra bolt kit needs to be ordered seperately.

50 51

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


AIR antenna SUPPORT AIR ANTENNA SUPPORT FRAME
product No: 5861 product No: 6455

AIR antenna SUPPORT The Air Antenna Support Frame


is designed for installation of one AIR unit (antenna integrated radio) or other is designed as a reinforcing frame for joining the attachment points at the
common panel antennas on the market. rear of the 2.4 m (8 ft) Air Antenna.

foundations & guy anchors


foundations & guy anchors

FLEXIBILITY - All functions included! Usability


The AIR antenna support can handle a wide range of all common tower leg The Air Antenna Support Frame is used together with the Air Antenna Sup-
designs, round, square, angle etc. Thanks to the unique design You can install port (Prod No: 5861) for installation of one 2,4 m (8 ft) Air Antenna unit di-
the AIR unit directly towards the frame leg without mounting tube and still rectly on a tower leg or other vertical structures of various size and shape.
rotate the azimuth +/- 60 degrees. Further features included are compensa-
tion for inclined tower legs and mechanical tilt function. Quality
The Air Antenna Support Frame is a hot-dip galvanized welded steel con-
QUALITY struction which gives the frame excellent corrosion resistance.
All components are made of anodized aluminium and acid proof stainless
steel which gives the support corrosion resistance. Easy assembly
Thanks to its design, handling and installation of the frame is very easy.
EASY ASSEMBLEY
Handling and installation is very easy due to the choice of materials and
design, but also because the support is partly preassembled at delivery.

WIND ACCESSORIES
WIND ACCESSORIES

Example of support installed on


common panel antenna.

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 990657

FUNCTION DESCRIPTION: AIR antenna support in two levels for installation of one AIR unit or other common panel antennas on the market.
For installation directly on tower leg or other vertical structures of various size and shape. Mounting tube not
needed. Including features such as compensation for inclined tower legs, turnable azimuth and mechanical tilt.
ORDER AND Technical information
MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle: Drawing No: CD 990714

FUNCTION DESCRIPTION: Reinforcement frame for the 2,4 m (8 ft) Air Antenna.
Minimum 25 mm (1,0 in) 35 x 35 (1,4 x 1,4 in) 35 x 35 (1,4 x 1,4 in) 40 mm (1,6 in) opening Stabilizes the attachment points on the back of the antenna.
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening
Mounting tubes 60-90 mm (2,4-3,5 in) Mechanical data: Welded steel S235, hot-dip galvanized according to EN ISO 1461

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions Length: Width: Height: Weight:
285 mm (11,2 in) 190 mm (7,5 in) 150 mm (5,9 in) 8 kg (17,6 lb) 1016 mm (40 in) 225 mm (8,8 in) 40 mm (1,6 in) 5,55 Kg (12,2 lb)

52 53

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


parallel Support antenna Support
FOR SMALL FRAME LEGS product No: 1763

product No: 1623 THE ANTENNA SUPPORT


is designed for installation of any kind of panel antennas, radio links up to 1,2
(3,9 ft) meters with strut support or other common telecom equipment. It can
be installed on masts as well as conical towers.

foundations & guy anchors


foundations & guy anchors

The parallel support


is an anodized aluminium support designed for use with the K-600 and
K-900 sections. The bracket can also be used on other masts using round FLEXIBILITY
frame members with a diameter between 25 mm (1,0 in) and 40 mm (1,6 in). The Antenna support can handle a wide range of all common frame leg de-
signs, round, square, angular etc. When the included extensions on the upper
Flexibility support are used it will compensate for the inclination of towers.
The bracket can also be turned around to fit a 25 mm (1,0 in) to 40 mm (1,6
in) tube to any round frame member with a diameter between 60 mm (2,4 QUALITY
in) and 90 mm (3,5 in). The parallel support is designed to fit an antenna All components are made of anodized aluminium and stainless steel which
tube with an outer diameter between 60 mm (2,4 in) and 90 mm (3,5 in). The gives the support excellent corrosion resistance.
60-90 mm
bracket is intended for panel antennas and small microwave links. (2,4-3,5 in)
EASY ASSEMBLY
Quality The choice of materials makes the product very light which makes the handling
All components are made of anodized aluminium and stainless steel which and installation very easy.
gives the support excellent corrosion resistance.
25-40 mm

WIND ACCESSORIES
(1,0-1,6 in)
WIND ACCESSORIES

Easy assembly
The choice of materials makes the product very light which makes the hand-
ling and installation very easy.

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 2770

FUNCTION DESCRIPTION: Universal clamp kit in two levels with space for one mounting tube.
Typical for installation of panel antennas, radio links or other common telecom equipment.
ORDER AND Technical information
Drawing No: CD 1880 MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle:

FUNCTION DESCRIPTION: Parallel support kit in two levels with space for one mounting tube.
Minimum 25 mm (1,0 in) 25 x 25 mm (1,0 x 1,0 in) 35 x 35 mm (1,4 x 1,4 in) 95 mm (3,7 in) opening
MOUNTING SPAN: frame leg diameter: mounting tube: Maximum 210 mm (8,3 in) 150 x 150 mm (5,9 x 5,9 in) 150 x 150 mm (5,9 x 5,9 in) 210 mm ( 8,3 in) opening
25-40 mm (1,0-1,6 in) 60-90 mm (2,4-3,5 in) Mounting tubes 60-90 mm (2,4-3,5 in)

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
127 mm (5 in) 127 mm (5 in) 80 mm (3,1 in) 2,5 kg (5,5 lb) per set 285 mm (11,2 in) 190 mm (7,5 in) 150 mm (5,9 in) 8 kg (17,64 lb)
NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93). NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93).

54 55

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com

OFFSET ANTENNA SUPPORT


MASTS & TOWERS

MASTS & TOWERS


Flexible ALD Mounting Support product No: 6967 / 6968 / 6969 / 7248 / 7239

product No: 5891 / 5896 THE OFFSET ANTENNA SUPPORTS


Are available in 5 different lengths with an offset from 360 mm (14,2 in) up

FLEXIBLE ALD MOUNTING SUPPORT to 1000 mm (39,4 in). They are designed for installation of panel antennas,
holder on the inside or the outside of the clamp.
is designed for installation of 1-3 antenna line microwave antennas and other common telecom equipment such as RRUs,
These options makes the support very flexible and
device units such as TMA, filters etc. By adding TMAs etc.
easy to optimize for your type of installation.

foundations & guy anchors


foundations & guy anchors

expansion for ALD mounting support it is possible FLEXIBILITY


QUALITY
to install up to 6 units of antenna line device. The offset antenna support can handle a wide range of all common frame leg
All components are made of anodized aluminium
FLEXIBILITY designs such as round, square, angular etc. The support is very light and still
and acid proof stainless steel which gives the sup-
The flexible ALD mounting support can handle has a high loadbearing capacity.
port excellent corrosion resistance.
a wide range of all common frame leg designs, QUALITY
EASY ASSEMBLEY
round, square, angle etc. Thanks to the unique de- All components are made of anodized aluminium and stainless steel which
The choice of materials and design makes the
sign. You can choose the position of the included gives the support excellent corrosion resistance and a very long lifespan.
product very light which makes the handling and
mounting tube. This can be done by turning the
installation very easy. EASY ASSEMBLY
tube holder in reverse position or mount the tube
The choice of materials makes the product very light which makes the hand-
ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

ORDER AND Technical information


product No: 5896 product No: 5891 Drawing No: CD 990909-500 / CD 990909-650 / CD 990909-750 / CD 990909-941 / CD 990909-1150
ORDER AND Technical information
FUNCTION DESCRIPTION: Offset Antenna Support in two levels designed for installation of panel antennas, microwave antennas and other

supports & brackets


supports & brackets

Drawing No: CD 990664 / CD 990665 common telecom equipment such as RRUs, TMAs etc. Available in five different lengths with an offset from 360
1000 mm. (14,2 39,4 in). Antenna mounting tube is not included, must be ordered separately.
FUNCTION DESCRIPTION: 5891: Flexible ALD mounting support in one level for installation of 1-3 antenna line device units. For Installa-
tion directly on tower leg or other vertical structures of various size and shape. 3 pc of mounting tubes MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle:
are included.
5896: Expansion for ALD mounting support to be added on the flexible ALD mounting support.
Containing 1pc tube holder and 1pc mounting tube. Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening
MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle:
Package dimensions: Length: Width: Height: Weight:
Ordering P/N Offset mm (in) mm (in) mm (in) kg (lb)
Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening 6967 360 mm 790 (31,1) 130 (5,1) 90 (3,5) 6,5 (14)
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm 4,0 in) opening 6968 500 mm 790 (31,1) 130 (5,1) 90 (3,5) 7,3 (16)
Mounting tubes 60 x 3 L=400 mm (2,4 x 3 L=15,7 in) 6969 600 mm 790 (31,1) 130 (5,1) 90 (3,5) 7,8 (17)
7248 800 mm 290 (11,4) 185 (7,3) 150 (5,9) 3,8 (8,4)
Package dimensions: Length: Width: Height: Weight: 950 (37,4) 100 (4,0) 50 (2,0) 5,0 (11)

rooftop solutions
rooftop solutions

5891: 405 mm (15,9 in) 136 mm (5,3 in) 136 mm (5,3 in) 4,8 kg (10,6 lb) 7239 1000 mm 290 (11,4) 185 (7,3) 150 (5,9) 3,8 (8,4)
5896: 550 mm (21,6 in) 95 mm (3,7 in) 95 mm (3,7 in) 1,5 kg (3,2 lb)
1150 (45,3) 100 (4,0) 50 (2,0) 6,1 (13)
NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93).

56 57

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Parallel Cog Support Double Antenna SupporT
product No: 5408 product No: 4984

The Parallel Cog Support The Double antenna support


is designed for installation of panel antennas and other common telecom is designed for installation of 2 panel antennas or small radio links or other
equipment such as RRU, TMA etc. common telecom equipment.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The Parallel Cog support has an off set between 205 mm (8 in) and 300 mm The support is assembled to a tower or mast frame member via 2 clamps.
(11,8 in) and can handle a wide range of all common frame leg designs such This clamp can handle all common frame leg designs such as, round, square,
as round, square, angle etc. angle etc.

Quality Quality
All components are made of anodized aluminium and stainless steel which All components are made of anodized aluminium and stainless steel which
gives the support excellent corrosion resistance. gives the support excellent corrosion resistance.

Easy assembly Easy assembly


The choice of materials makes the product very light which makes the hand- The choice of materials makes the product very light which makes the hand-
ling and installation very easy. ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

c/c
466
mm
(18,
3 in
)

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 990601 Drawing No: CD 990517

FUNCTION DESCRIPTION: Parallel support kit in two levels with an off set between 205 mm (8 in) and 300 mm (11,8 in) for FUNCTION DESCRIPTION: Clamp kit in two levels, with horizontal beams, and space for two mounting tubes. Typical for installation of
installation of panel antennas or other common telecom equipment such as RRU, TMA etc. panel antennas, radio links or other common telecom equipment.

MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle: MOUNTING SPAN: Tubes: Square profiles: 90 Angle: 60 Angle:

Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening Minimum 25 mm (1,0 in) 25 x 25 mm (1,0 x 1,0 in) 45 x 45 mm (1,8 x 1,8 in) 65 mm (2,6 in) opening
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 120 mm (4,7 in) opening
Mounting tubes 60-90 mm (2,4-3,5 in) Mounting tubes 60-90 (2,4-3,5 in)

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
285 mm (11 in) 186 mm (7,3 in) 144 mm (5,7 in) 6 kg (13,2 lb) 790 mm (31 in) 130 mm (5,1 in) 90 mm (3,5 in) 10,4 kg (22,9 lb)
NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93). NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93).

58 59

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


3-Sector Frame Double SPLIT Support
product No: 7080-12 / 7080-12 product No: 1624 / 1626

The 3-Sector Frame The Double SPLIT Support


Is a two level support designed for installation of three panel antennas on the is designed for installation of 2 panel antennas up to 2,6 m (8,5 ft).
same bracket. The c/c distance between the antennas is 500 mm (19,7 in).
Flexibility

foundations & guy anchors


foundations & guy anchors

Flexibility The support is mounted to a centre tube with dimension 75 to 120 mm, (3,0
The support can be mounted to basically any type of frame leg for example to 4,7 in). The antenna mounting tube can be 45-60 mm, (1,8 to 2,4 in).
round, square, 60 angle as well as 90 thanks to the very flexible bracket.
Quality
Quality All components are made of anodized aluminium and stainless steel which
All components are made of anodized aluminium and stainless steel which gives the support excellent corrosion resistance.
gives the support excellent corrosion resistance.
Easy assembly
Easy assembly The choice of materials makes the product very light which makes the hand-
The choice of materials makes the product very light which makes the hand- ling and installation very easy.
ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 990904-1150 / CD 990904-1750 Drawing No: CD 189023 CD 189123

FUNCTION DESCRIPTION: 3-Sector frame for installation of three panel antennas or microwave antennas on one frameleg. mounting span: mounting tube: centre tubes: mounting tube: centre tubes:
45-60 mm 75-100 mm 45-60 mm 100-120 mm
MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle: (1,8 to 2,4 in) (3,0 to 4,0 in) (1,8 to 2,4 in) (4,0 to 4,7 in)

FUNCTION DESCRIPTION: Antenna support kit in two levels with space for 2 mounting tubes on 1 centre tube.
Minimum: 25 mm (1,0) 25 x 25 mm (1,0 x 1,0) 35 x 35 mm (1,4 x 1,4) 95 mm (3,7 in) opening Typical for installation of panel antennas.
Maximum: 210 mm (8,3) 150 x 150 mm (5,9 x 5,9) 150 x 150 mm (5,9 x 5,9) 210 mm i (8,3 in) opening
Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

Package dimensions P/N: Length: Width: Height: Weight: 1624 285 mm (11,1 in) 190 mm (7,5 in) 150 mm (5,9 in) 4,2 kg (9,25 lb)
1200 mm (47,2 in) 800 mm (31,5in) 350 mm (3,77 in) 32 kg (70,5 lb) 1626 285 mm (11,2 in) 190 mm (7,5 in) 150 mm (5,9 in) 4,4 kg (9,7 lb)
NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93). NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93).

60 61

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Triple SPLIT SupporT 1-L Link Support
product No: 1625 / 1627 product No: 1981

The Triple SPLIT SupporT The 1-L Link Support


is designed for installation of three panel antennas up to 2,6 m (8,5 ft). is designed for installation of several small radio links or one large link up
to 3,0 m (10 ft) with strut support. The 1-L link support can be installed on
Flexibility masts as well as conical towers.

foundations & guy anchors


foundations & guy anchors

The support is mounted to a centre tube with dimension 75 to 100 mm, (3,0
to 4,0 in) or 100 to 120 mm, (4,0 to 4,7 in) The antenna mounting tube can Flexibility
be 45-60 mm, (1,8 to 2,4 in). The 1-Leg link support can handle a wide range of all common frame leg
designs, round, square, angular, etc. Thanks to the flexibility of the Cue Dee
Quality clamp 270. The oblong holes on the upper extension arms allow the support
All components are made of anodized aluminium and stainless steel which to compensate for inclined towers.
gives the support excellent corrosion resistance.
Quality
Easy assembly All components are made of anodized aluminium and stainless steel which
The choice of materials makes the product very light which makes the hand- gives the support excellent corrosion resistance.
ling and installation very easy.
Easy assembly
The choice of materials makes the product very light which makes the hand-
ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

UpPer LOWER

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 184224
ORDER AND Technical information
Drawing No: Prod.Nr 1625, CD 189060 Prod.Nr 1627, CD 189160 FUNCTION DESCRIPTION: Clamp kit in two levels, with space for 1 mounting tube.
Typical for installation of large radio links or several small ones or other common telecom equipment.
mounting span: mounting tube: centre tubes: mounting tube: centre tubes:
45-60 mm 75-100 mm 45-60 mm 100-120 mm MOUNTING SPAN: Tubes: Square profiles: 90 Angle
: 60 Angle:
(1,8 to 2,4 in) (3,0 to 4,0 in) (1,8 to 2,4 in) (4,0 to 4,7 in)

FUNCTION DESCRIPTION: Antenna support kit in two levels with space for 3 mounting tubes on 1 centre tube. Minimum 25 mm (1,0 in) 60 x 60 mm (2,4 x 2,4 in) 60 x 60 mm (2,4 x 2,4 in) 65 mm (2,6 in) opening
Typical for installation of panel antennas. Maximum 270 mm (10,6 in) 210 x 210 mm (8,3 x 8,3 in) 220 x 220 mm (8,7 x 8,7 in) 310 mm (12,2 in) opening
Mounting tube 25-120 (1,0-4,7 in) (Recommended 114 mm (4,5 in), see page 92-93).
Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

1625 285 mm (11,2 in) 190 mm (7,5 in) 150 mm (5,9 in) 5,1 kg (11,24 lb) Package dimensions: Length: Width: Height: Weight:
1627 285 mm (11,2 in) 190 mm (7,5 in) 150 mm (5,9 in) 5,2 kg (11,46 lb) 540 mm (21 in) 175 mm (6,9 in) 180 mm (7,1 in) 23 kg (51 lb)
NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93). NOTE! Mounting tubes are not included. Must be ordered separately (see page 92-93).

62 63

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Top Spire 2-l mUnit Base Mount ONLY FITS
Ericsson EQUIPMENT

product No: 5215 product No: 6127

The Top Spire 2-L The mUnit Base Mount


is designed as an extension kit for towers and masts and is suitable to install is designed as a base component in a building system for mUnit products.
3 panel antennas up to 2,3 m (7,5 ft). (Other versions are available up on By only using the mUnit Base Mount it`s possible to install one mRRU or
request). mRBS on wall. Along with additional accessories (Pole Clamp, Hose Plate

foundations & guy anchors


foundations & guy anchors

The centre aluminium pole 120 mm (4,7 in) is 4,8 m (15,7 ft) long and etc.) it is also possible to install on masts, towers or other vertical / horizontal
equipped with split supports to carry the included 60 mm (2,4 in) mounting structures.
tubes.
Flexibility
Flexibility The mUnit Base Mount can either be installed in vertical position used for tilt
The support has 1,5 m (5 ft) alubra bars at two levels to distribute the load function or horizontal position used for azimuth function. If needed its pos-
on two frame legs. The support can be installed on top of towers and masts sible to combine both features by using two Base Mount units mounted cross
with all common frame leg designs, round, square, angle etc, thanks to the wise to achieve both azimuth and tilt function. A degree scale on one of the
Cue Dee clamp. link arms helps the installer to reach exact orientation.
Quality
Quality
All components are made of anodized aluminium and stainless steel which
All components are made of anodized aluminium or acid proof stainless steel
gives the support excellent corrosion resistance.
which gives the support excellent corrosion resistance.
Easy assembly
The choice of materials makes the product very light which in turn makes the Easy assembly

WIND ACCESSORIES
handling and installation very easy. Handling and installation is very easy thanks to the light weight material of
WIND ACCESSORIES

the product.

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information Drawing No: CD 990705

Drawing No: CD 189648-4 FUNCTION DESCRIPTION: mUnit Pole Clamp for attachment of mUnit Base Mount on mast,
towers or other vertical/horizontal structures.
FUNCTION DESCRIPTION: Top Spire support kit in 2 levels with alubra bars which distribute the load on frame legs.
For installation of 3 panel antennas up to 2,3 m (7,5 ft). Mechanical data:
Mounting Plates: Aluminium, nature anodized 20my
MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle: Drill template for wall: Included, square c/c 140 mm (5,5 in) screw dimension M10
Link arms: Blast acid proof stainless steel
Tilt function: On wall max down tilt: 23 degree
Minimum 25 mm (1,0 in) 30 x 30 mm (1,2 x 1,2 in) 35 x 35 mm (1,4 x 1,4 in) 35 mm (1,4 in) opening Azimuth function: On wall max +/- 45 degree
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 60 mm (2,4 in) opening Fasteners: Acid proof stainless steel

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
4800 mm (189 in) 300 mm (11,8 in) 300 mm (11,8 in) 65 kg (143 lb) 260 mm (10,2 in) 240 mm (9,5 in) 40 mm (1,6 in) 2.5 kg (5,5 lb)
NOTE! RRU is not included.

64 65

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


mUnit POLE CLAMP ONLY FITS
Ericsson EQUIPMENT mUnit OMNI SUPPORT ONLY FITS
Ericsson EQUIPMENT

product No: 6120 product No: 6129

The mUnit Pole Clamp The mUnit Omni Support


is a part of building system for mUnit products and designed for attach- is designed for installation of two small omni antennas on one mRRU or one
ment of mUnit Base Mount towards mast, towers or other vertical / horizontal mRBS unit.
structures.

foundations & guy anchors


foundations & guy anchors

Flexibility
Flexibility Thanks to the design of the mUnit Omni Support it allows the omni antennas
The mUnit Pole Clamp can handle a wide range of all common tower leg to be mounted either in a vertical or a horizontal position on the mRRU/mRBS
designs, round, square, angle etc. The Pole Clamp also has elongated slotted unit. For wall, pole, mast and tower installation the mUnit Omni Support is
holes which means that the installer can unhook one half during installation always mounted together with the mUnit Base Mount.
and do not need to handle any loose parts.
Quality
Quality All components are made of acid proof stainless steel which gives the sup-
All components are made of anodized aluminium or acid proof stainless steel port excellent corrosion resistance.
which gives the support excellent corrosion resistance.
Easy assembly
Easy assembly Handling and installation is very easy thanks to the light weight material of
Handling and installation is very easy thanks to the light weight material of the product.
the product.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 990703

FUNCTION DESCRIPTION: mUnit Pole Clamp for attachment of mUnit Base Mount towards mast, towers or other vertical/horizontal structures. ORDER AND Technical information
Mechanical data: Drawing No: CD 990706
Clamp profiles: Aluminium, nature anodized 20m
Fasteners: Acid proof stainless steel M10 x 185 mm (7,3 in) FUNCTION DESCRIPTION: mUnit Omni Support for installation of two small omni antennas on one mRRU or one mRBS unit.

mounting span: Tubes: Square profiles: 90 Angle 60 Angle: Mechanical data:


Omni Support: Acid proof stainless steel 3 mm (0,118 in)
Fasteners: Acid proof stainless steel

Minimum: 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening Package dimensions: Length: Width: Height: Weight:
Maximum: 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening) 310 mm (12,2 in) 160 mm (6,3 in) 95 mm (3,7 in) 0,7 Kg (1,5 lb)

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: ACCESSORIES p/n:


210 mm (8,3 in) 235 mm (9,2 in) 45 mm (1,8 in) 1,5 kg (4 lb) 6127 mUnit Base Mount
NOTE! RRU is not included. NOTE! RRU is not included.

66 67

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


mUnit HOSE PLATE ONLY FITS
Ericsson EQUIPMENT RRU Support kit ONLY FITS
Ericsson EQUIPMENT

product No: 6193 product No: 5335 / 5336 fits ericsson rru models: RRUW, RRUS 01, RRUS 11

The RRU Support kit Quality


The mUnit Hose Plate is designed for installation of one RRU unit perpendicular to the mounting All components are made of anodized aluminium and stainless steel
is a part of a building system for mUnit products and designed for attachment tube with possibility to add additional units such as A2 or PSU. which gives the support excellent corrosion resistance.
of mUnit Base Mount towards round structures.
Flexibility Easy assembly

foundations & guy anchors


foundations & guy anchors

The RRU support can handle a wide range of all common frame leg de- The choice of materials makes the product very light which makes the
Flexibility
signs, round, square, angular etc. The grooves in the attachment beam on handling and installation very easy.
The mUnit Hose Plate allows installation of a wide range of round structures
the back of the clamp allows the installed unit/units to always be centred
depending on the choice of Hose Clamp as accessories.
around the frame leg.

Quality Expansion kit


All components are made of acid proof stainless steel which gives the sup-
port excellent corrosion resistance.

Easy assembly
Handling and installation is very easy thanks to the light weight material of
the product.

RRU support kit

WIND ACCESSORIES
WIND ACCESSORIES

The RRU support kit is designed to install one single RRU. By adding the
expansion kit it is possible to install one additional RRU on the same support.

rru support kit ORDER AND Technical information


Drawing No: CD 990581

FUNCTION DESCRIPTION: RRU support kit is a two level support for installation of one RRU with possibility
to attach PSU, A2 or TSBDA units
MOUNTING SPAN: Tubes: Square profiles: 90 Angle
: 60 Angle:

supports & brackets


supports & brackets

Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening
Maximum with 130 mm 80 mm (3,14 in) 65 x 65 mm (2,6 x 2,6 in) 90 x 90 mm (3,5 x 3,5 in) 80 mm (3,14 in) opening
ORDER AND Technical information (5 in) bolts (standard)
Drawing No: CD 990709 Maximum with 200 mm 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening
(7,9 in) bolts (optional)
FUNCTION DESCRIPTION: mUnit Hose Plate for attachment of mUnit Base Mount on round structures.
Package dimensions: Length: Width: Height: Weight:
Mechanical data: 550 mm (21,6 in) 95 mm (3,7 in) 95 mm (3,7 in) 5 kg (11 lb)
Hose Plate: Acid proof stainless steel 2 mm (0,08 in)
Fasteners: Acid proof stainless steel expansion kit ORDER AND Technical information
Package dimensions: Length: Width: Height: Weight: Drawing No: CD 990582
210 mm (8,3 in) 235 mm (9,3 in) 45 mm (1,8 in) 0,75 Kg (1,65 lb)
FUNCTION DESCRIPTION: Expansion kit for installation of two RRU units with possibility to attach PSU or A2 units.
ACCESSORIES p/n:

rooftop solutions
rooftop solutions

6127 mUnit Base Mount Package dimensions: Length: Width: Height: Weight:
6371 Hose Clamp 390 mm (15,35 in) 85 mm (3,35 in) 85 mm (3,35 in) 2 kg (4,4 lb)
NOTE! Hose Clamps not included, RRU is not included. NOTE! RRU is not included.

68 69

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


UNIVERSAL ONLY FITS
Ericsson EQUIPMENT
Double RRU Support ONLY FITS
Ericsson EQUIPMENT

SINGLE RRU SUPPORT product No: 6400 fits ericsson rru models: RRUW, RRUS 01, RRUS 11

product No: 6651 fits ericsson rru models: RRUW, RRUS 01, RRUS 11 The double RRU Support
is designed for installation of 2 RRU units with possibility to attach a PSU on
the back.
Universal Single RRU Support

foundations & guy anchors


foundations & guy anchors

is designed for installation of one RRU unit on mast, towers or other vertical Flexibility
and horizontal structures. The RRU support can handle a wide range of all common frame leg designs
such as round, square, angular, etc.
Flexibility
The support can be installed on a wide range of all common vertical and Quality
horizontal structures such as round, square, angle etc. It can also be instal- All components are made of anodized aluminium and stainless steel which
led on wall. The support is designed for both a RRU unit and for a RRU unit gives the support excellent corrosion resistance.
combined with a PSU or A2 unit.
Easy assembly
Quality The choice of materials makes the product very light which makes the hand-
All components are made of anodized aluminum and acid proof stainless ling and installation very easy.
steel which gives the support excellent corrosion resistance.

Easy assembly
Handling and installation is very easy thanks to its light weight but also
thanks to its clever design with elongated opening holes allowing the clamp

WIND ACCESSORIES
to be opened and closed without any loose parts which rapidly speeds up
WIND ACCESSORIES

the installation.

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 990849 ORDER AND Technical information
FUNCTION DESCRIPTION: Universal Single RRU Support for installation on mast, tower or other vertical and horizontal structures as well as Drawing No: CD 990787
on wall. Fits all common RRU:s in Ericsson RRU family and other units with horizontal distance c/c 146 mm (5 )
such as RBS, PBC, GPE or A2 etc. When installing RRU it can also be combined with a PSU or A2 unit. FUNCTION DESCRIPTION: Double RRU support for installation of 2 RRU units with possibility
to attach a PSU on the back.
MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle
MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle

Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
280 mm (11 in) 90 mm (3,5 in) 90 mm (3,5 in) 3,3 kg (7,28 lb) 290 mm (11,4 in) 124 mm (4,88 in) 122 mm (4,80 in) 5,1 kg (11,24 lb)
NOTE! RRU is not included. NOTE! RRU is not included.

70 71

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


triple RRU Support ONLY FITS
Ericsson EQUIPMENT
RRU Light Wall Support ONLY FITS
Ericsson EQUIPMENT

product No: 7294 fits ericsson rru models: RRUW, RRUS 01, RRUS 11 product No: 5865 fits ericsson rru models: RRUW, RRUS 01, RRUS 11

The Triple RRU Support KIT RRU Light Wall Support


is designed for installation of three RRU units with possibility to is designed for installation of one RRU unit or 1 RBS 6302 unit on wall.
attach a PSU on the back.
Flexibility

foundations & guy anchors


foundations & guy anchors

Flexibility The support is easy to install towards the wall. A template for drilling is in-
The RRU support can handle a wide range of all common frame leg designs cluded. The fixing angles have 2 flanges with different length which makes
such as round, square, angular, etc. it possible to choose long or short distance from wall. The long distance
makes it possible to fit a PSU on the backside of the RRU when needed.
Quality
All components are made of anodized aluminium and acid proof stainless Quality
steel which gives the support excellent corrosion resistance. All components are made of anodized aluminium and acid proof stainless
steel which gives the support excellent corrosion resistance.
Easy assembly
The support is installed on only one level which makes installation very fast. Easy assembly
Handling and installation is very easy thanks to the light weight material of
the product.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information


ORDER AND Technical information
Drawing No: CD 990986
Drawing No: CD 990658
FUNCTION DESCRIPTION: Triple RRU support in aluminium for installation of three RRU units
FUNCTION DESCRIPTION: A two level support for installation of 1 RRU or 1 RBS 6302 on any wall. Containing 2 sets of angle brackets
with possibility to attach a PSU on the back. (RRU not included)
with different length sides which make it possible to choose distance from the wall and also fit a PSU when needed.
MOUNTING SPAN: Tubes: Square profiles: 90 Angle 60 Angle
Mechanical data:
Angle profiles: Aluminium, Nature anodized 20m
Minimum 25 mm (1,0 in) 35 x 35 mm (1,4 x 1,4 in) 35 x 35 mm (1,4 x 1,4 in) 40 mm (1,6 in) opening Fasteners: Acid proof stainless steel. (Note! Fasternes for wall are not included).
Maximum 120 mm (4,7 in) 90 x 90 mm (3,5 x 3,5 in) 90 x 90 mm (3,5 x 3,5 in) 100 mm (4,0 in) opening Distance from wall: Short = 84 mm (3,3 in) Long = 125 mm (4,9 in)

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
485 mm (19,1 in) 350 mm (13,8 in) 285 mm (11,2 in) 11.9 kg (26,2 lb) 200 mm (11 in) 90 mm (3,5 in) 90 mm (3,5 in) 2,5 kg (5,5 lb)
NOTE! RRU is not included. NOTE! RRU is not included.

72 73

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


RRU Wall Support ONLY FITS
Ericsson EQUIPMENT

product No: 5553 fits ericsson rru models: RRUW, RRUS 01, RRUS 11

The RRU Wall support


is designed for installation of 1 RRU with the possibility to attach a PSU
or A2 unit on the back. Fastening kits can be supplied depending on wall
quality.

foundations & guy anchors


foundations & guy anchors

Flexibility
The support fits the Ericsson RRU models RRUW 01, RRUS 01, RRUS 11 &
RRUS 12.

Quality
All components are made of anodized aluminium and stainless steel which
gives the support excellent corrosion resistance.

Easy assembly
The choice of materials makes the product very light which makes the
handling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

ROOFTOP
SOLUTIONS

supports & brackets


supports & brackets

ORDER AND Technical information


CUE DEE can supply you with various types of rooftop solutions. We have non-penetrating
Drawing No: CD 990608
ballast solutions as well as Dipods, both are available in a large number of versions.

FUNCTION DESCRIPTION: Wall support kit with space for 1 RRU mounted perpendicular on the wall.

Mechanical data: wall installation: angles and supports:


Threaded M12 Rods or expander bolts Aluminium, Nature anodized 20m

rooftop solutions
rooftop solutions

Package dimensions: Length: Width: Height: Weight:


390 mm (15,3 in) 85 mm (3,3 in) 85 mm (3,3 in) 2,5 kg (5,5 lb)
NOTE! RRU is not included.

74 75

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com

BALLAST SYSTEM 1460 BALLAST SYSTEM 1890


MASTS & TOWERS

MASTS & TOWERS


product No: 6408 / 6409 / 6411 / 6412 product No: 6414 / 6415

THE BALLAST SYSTEM 1460


is a free standing rooftop solution designed for installation of any kind of THE BALLAST SYSTEM 1890
panel antenna, small radio link or other common telecom equipment. is a free standing rooftop solution designed for installation of any kind of
The mounting tube height is 1.5, 2, 2.5 or 3 m (5, 7, 8, or 10 ft). panel antenna, small radio link or other common telecom equipment.
The mounting tube height is 2.5 or 3 m (8 or 10 ft).
Flexibility

foundations & guy anchors


foundations & guy anchors

The ballast system is a non-penetrating rooftop system. The antenna moun- Flexibility
ting tube is fitted to one of the corners of the ballast frame which makes it The ballast system is a non-penetrating rooftop system. The antenna moun-
possible to place the antenna close to the edge of the building. This increases ting tube is fitted to one of the corners of the ballast frame which makes it
coverage and may reduce the required height of the installation. possible to place the antenna close to the edge of the building. This increases
coverage and may reduce the required height of the installation.
Quality
The mounting tube and support tubes with brackets are made of anodized Quality
aluminium. The ballast frame is made of galvanized steel components. This The mounting tube and support tubes with brackets are made of anodized
gives the system excellent corrosion resistance and a long life. A 3 mm (0,12 aluminium. The ballast frame is made of galvanized steel components. This
in) EPDM rubber sheet is included and should be placed under the ballast gives the system excellent corrosion resistance and a long life. A 3 mm (0,12
frame to protect the roof. in) EPDM rubber sheet is included and should be placed under the ballast
frame to protect the roof.
Easy assembly
The light weight aluminium components makes the assembly extremely fast Easy assembly
and easy. The light weight aluminium components makes the assembly extremely fast

WIND ACCESSORIES
and easy.
WIND ACCESSORIES

ORDER AND Technical information


Drawing No: CD 990773-1500 / CD 990773-2000 / CD 990773-2500 / CD 990773-3000
ORDER AND Technical information

supports & brackets


supports & brackets

FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. Typical for installation of panel antennas, Drawing No: CD 990774-2500 / CD 990774-3000
radio links or other common telecom equipment. (Ballast not included)
FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. Typical for installation of panel antennas,
Mechanical data: radio links or other common telecom equipment. (Ballast not included)
Tubes: Aluminium, Nature anodized 20m
Brackets: Aluminium, Nature anodized 20m Mechanical data:
Ballast frame: Galvanized steel Tubes: Aluminium, Nature anodized 20m
U-bolts: Acid proof stainless steel Brackets: Aluminium, Nature anodized 20m
Fasteners: Acid proof stainless steel Ballast frame: Galvanized steel
U-bolts: Acid proof stainless steel
Package dimensions P/N: Length: Width: Height: Weight: Fasteners: Acid proof stainless steel
6408 1600 mm (63 in) 400 mm (16 in) 200 mm (7,9 in) 105 kg (231 lb)
6409 2000 mm (79 in) 400 mm (16 in) 200 mm (7,9 in) 108 kg (238 lb) Package dimensions P/N: Length: Width: Height: Weight:
6411 2500 mm (98 in) 400 mm (16 in) 200 mm (7,9 in) 110 kg (243 lb) 6414 2500 mm (98 in) 400 mm (16 in) 200 mm (7,9 in) 154 kg (340 lb)
6412 3000 mm (118 in) 400 mm (16 in) 200 mm (7,9 in) 113 kg (249 lb) 6415 3000 mm (118 in) 400 mm (16 in) 200 mm (7,9 in) 157 kg (346 lb)

rooftop solutions
rooftop solutions

ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621 ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621
NOTE! Ballast not included. NOTE! Ballast not included.

76 77

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com

BALLAST SYSTEM 2320


MASTS & TOWERS

BALLAST SYSTEM 2750

MASTS & TOWERS


product No: 6416 / 6418 / 6550 product No: 6420 / 6421 / 6423

THE BALLAST SYSTEM 2320 THE BALLAST SYSTEM 2750


is a free standing rooftop solution designed for installation of any kind of is a free standing rooftop solution designed for installation of any kind of
panel antenna, small radio link or other common telecom equipment. panel antenna, small radio link or other common telecom equipment.
The mounting tube height is 3, 4 or 5 m (10, 13 or 16 ft). The mounting tube height is 4, 5 or 6 m (13, 16 or 20 ft).

Flexibility Flexibility

foundations & guy anchors


foundations & guy anchors

The ballast system is a non-penetrating rooftop system. The antenna moun- The ballast system is a non-penetrating rooftop system. The antenna moun-
ting tube is fitted to one of the corners of the ballast frame which makes it ting tube is fitted to one of the corners of the ballast frame which makes it
possible to place the antenna close to the edge of the building. This increases possible to place the antenna close to the edge of the building. This increases
coverage and may reduce the required height of the installation. coverage and may reduce the required height of the installation.

Quality Quality
The mounting tube and support tubes with brackets are made of anodized The mounting tube and support tubes with brackets are made of anodized
aluminium. The ballast frame is made of galvanized steel components. This aluminium. The ballast frame is made of galvanized steel components. This
gives the system excellent corrosion resistance and a long life. A 3 mm (0,12 gives the system excellent corrosion resistance and a long life. A 3 mm (0,12
in) EPDM rubber sheet is included and should be placed under the ballast in) EPDM rubber sheet is included and should be placed under the ballast
frame to protect the roof. frame to protect the roof.

Easy assembly Easy assembly


The light weight aluminium components makes the assembly extremely fast The light weight aluminium components makes the assembly extremely fast
and easy. and easy.

WIND ACCESSORIES
WIND ACCESSORIES

ORDER AND Technical information


ORDER AND Technical information
Drawing No: CD 990777-4000 / CD 990777-5000 / CD 990777-6000

supports & brackets


supports & brackets

Drawing No: CD 990775-3000 / CD 990776-4000 / CD 990776-5000


FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. Typical for installation of panel antennas,
FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. Typical for installation of panel antennas,
radio links or other common telecom equipment. (Ballast not included)
radio links or other common telecom equipment. (Ballast not included)
Mechanical data:
Mechanical data:
Tubes: Aluminium, Nature anodized 20m
Tubes: Aluminium, Nature anodized 20m
Brackets: Aluminium, Nature anodized 20m
Brackets: Aluminium, Nature anodized 20m
Ballast frame: Galvanized steel
Ballast frame: Galvanized steel
U-bolts: Acid proof stainless steel
U-bolts: Acid proof stainless steel
Fasteners: Acid proof stainless steel
Fasteners: Acid proof stainless steel
Package dimensions P/N: Length: Width: Height: Weight:
Package dimensions P/N: Length: Width: Height: Weight:
6420 4000 mm (158 in) 500 mm (20 in) 200 mm (7,9 in) 280,3 kg (618 lb)
6416 3000 mm (118 in) 500 mm (20 in) 200 mm (7,9 in) 207 kg (456 lb)
6421 5000 mm (197 in) 500 mm (20 in) 200 mm (7,9 in) 286,7 kg (632,1 lb)
6418 4000 mm (158 in) 500 mm (20 in) 200 mm (7,9 in) 216 kg (476 lb)
6423 6000 mm (287 in) 400 mm (16 in) 200 mm (7,9 in) 294,3 kg (648,8 lb)
6550 5000 mm (197 in) 500 mm (20 in) 200 mm (7,9 in) 222 kg (489 lb)

rooftop solutions
rooftop solutions

ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621
ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621
NOTE! Ballast not included.
NOTE! Ballast not included.

78 79

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Ballast Box System 2M Ballast Box System 3M
product No: Ballast box system: 1902, EPDM rubber sheet: 2795 product No: Ballast box system: 1782, EPDM rubber sheet: 1962

The 4 ballast box system The 8 ballast box system


is a 2 m (7 ft) high freestanding rooftop solution designed for installation of is a 3 m (10 ft) high freestanding rooftop solution designed for installation of
any kind of panel antenna, small radio link or other common telecom equip- any kind of panel antenna, small radio link or other common telecom equip-
ment. Other antenna mounting tube dimensions are available on request. ment. Other antenna mounting tube dimensions are available on request.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The ballast box system is a non-penetrating rooftop system. The antenna The ballast box system is a non-penetrating rooftop system. The antenna
mounting tube is fitted to one of the corners of the joined modules which mounting tube is fitted to one of the corners of the joined modules which
makes it possible to place the antenna close to the edge of the building. This makes it possible to place the antenna close to the edge of the building. This
increases coverage and may reduce the required height of the installation. increases coverage and may reduce the required height of the installation.

Quality Quality
The mounting tube and support tubes with brackets are made of anodized The mounting tube and support tubes with brackets are made of anodized
aluminium. The ballast box modules are made of galvanized steel compo- aluminium. The ballast box modules are made of galvanized steel compo-
nents. This gives the system excellent corrosion resistance and a long life. nents. This gives the system excellent corrosion resistance and a long life.
As an option a 3 mm (0,12 in) EPDM rubber sheet is placed under the ballast As an option a 3 mm (0,12 in) EPDM rubber sheet is placed under the ballast
boxes to protect the roof. boxes to protect the roof.

Easy assembly Easy assembly


The module based ballast box system together with light weight aluminium The module based ballast box system together with light weight aluminium

WIND ACCESSORIES
WIND ACCESSORIES

components makes the assembly extremely fast and easy. components makes the assembly extremely fast and easy.

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Ballast box system: Drawing No: CD 82391204 EPDM rubber sheet: dimension: 1,05 x 1,05 m (3,4 x 3,4 ft) Ballast box system: Drawing No: CD 82391408 EPDM rubber sheet: dimension: 1,6 x 1,6 m (5,2 x 5,2 ft)

FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop.
Typical for installation of panel antennas, radio links or other common telecom equipment. Typical for installation of panel antennas, radio links or other common telecom equipment.

Mechanical data: mounting tube: Support tubes: Mechanical data: mounting tube: Support tubes:
90, L=2000 (3,5 in, L=78,7 in) (Other dimensions available on request). 75, L=1500 (3,0, L=59 in) 90, L=3000 (3,5 in, L=118 in) (Other dimensions available on request) 75, L=2000 (3,0, L=79 in)

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
Package 1 2000 mm (78,7 in) 150 mm (5,9 in) 160 mm (6,3 in) 13,6 kg (30 lb) Package 1 3000 mm (118 in) 150 mm (5,9 in) 160 mm (6,3 in) 19,4 kg (42,76 lb)
Package 2 1200 mm (47,2 in) 800 mm (31,5 in) 350 mm (13,8 in) 125 kg (275 lb) Package 2 1200 mm (47,2 in) 800 mm (31,5 in) 550 mm (21,6 in) 225 kg (496 lb)

rooftop solutions
rooftop solutions

ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621 ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621
NOTE! Ballast not included. NOTE! Ballast not included.

80 81

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Ballast Box System 4M Ballast Box System 5m
product No: Ballast box system: 1816, EPDM rubber sheet: 1969 product No: Ballast box system: 1821, EPDM rubber sheet: 3089

The 14 ballast box system The 21 ballast box system


is a 4 m (13 ft) high freestanding rooftop solution designed for installation of is a 5 m (16 ft) high freestanding rooftop solution designed for installation of
any kind of panel antenna, small radio link or other common telecom equip- any kind of panel antenna, small radio link or other common telecom equip-
ment. Other antenna mounting tube dimensions are available on request. ment. Other antenna mounting tube dimensions are available on request.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The ballast box system is a non-penetrating rooftop system. The antenna The ballast box system is a non-penetrating rooftop system. The antenna
mounting tube is fitted to one of the corners of the joined modules which mounting tube is fitted to one of the corners of the joined modules which
makes it possible to place the antenna close to the edge of the building. This makes it possible to place the antenna close to the edge of the building. This
increases coverage and may reduce the required height of the installation. increases coverage and may reduce the required height of the installation.

Quality Quality
The mounting tube and support tubes with brackets are made of anodized The mounting tube and support tubes with brackets are made of anodized
aluminium. The ballast box modules are made of galvanized steel compo- aluminium. The ballast box modules are made of galvanized steel compo-
nents. This gives the system excellent corrosion resistance and a long life. nents. This gives the system excellent corrosion resistance and a long life.
As an option a 3 mm (0,12 in) EPDM rubber sheet is placed under the ballast As an option a 3 mm (0,12 in) EPDM rubber sheet is placed under the ballast
boxes to protect the roof. boxes to protect the roof.

Easy assembly Easy assembly


The module based ballast box system together with light weight aluminium The module based ballast box system together with light weight aluminium

WIND ACCESSORIES
components makes the assembly extremely fast and easy.
WIND ACCESSORIES

components makes the assembly extremely fast and easy.

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Ballast box system Drawing No: CD 82392614 EPDM rubber sheet: dimension: 2,05 x 2,05 m (80,7 x 80,7 in) Ballast box system Drawing No: CD 82392821 EPDM rubber sheet: dimension: 2,76 x 2,60 m (109 x 102 in)
FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop. FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop.
Typical for installation of panel antennas, radio links or other common telecom equipment. Typical for installation of panel antennas, radio links or other common telecom equipment.
Mechanical data: mounting tube: Support tubes: Mechanical data: mounting tube: Support tubes:
114, L = 4000 (4,5 in, L=157,5 in) (Other dimensions available on request). 75, L = 3000 (3,0, L=118 in) 114, L = 5000 (4,5 in, L=197 in) (Other dimensions available on request) 75, L = 3900 (3,0 in, L=153,5 in)
Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:
Package 1 4000 mm (157,5 in) 150 mm (5,9 in) 160 mm (6,3 in) 31,3 kg (69 lb) Package 1 5000 mm (197 in) 150 mm (5,9 in) 180 mm (7 in) 39,8 kg (87,8 lb)
Package 2 1200 mm (47,2 in) 800 mm (31,5 in) 740 mm (29 in) 371 kg (818 lb) Package 2 1200 mm (47,2 in) 800 mm (31,5 in) 910 mm (36 in) 540 kg (1190 lb)

rooftop solutions
rooftop solutions

ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621 ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621
NOTE! Ballast not included.
NOTE! Ballast not included.

82 83

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Ballast Box System 6M Dipod 3M Light
product No: Ballast box system: 1823, EPDM rubber sheet: 3089 product No: 2699

The 21 ballast box system The light dipod rooftop system


is a 6 m (20 ft) high freestanding rooftop solution designed for installation of is a 3 m (10 ft) high fixed rooftop solution designed for installation of small
any kind of panel antenna, small radio link or other common telecom equip- panel antennas, small radio links or other common telecom equipment. This
ment. Other antenna mounting tube dimensions are available on request. version is optimized for low weight and cost.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The ballast box system is a non-penetrating roof top system. The antenna The dipodsystem is a system with the capability of handling all possible roof
mounting tube is fitted to one of the corners of the joined modules which inclinations. The supports are attached to the roof to ensure a firm anchoring.
makes it possible to place the antenna close to the edge of the building. This The antenna mounting tube is supported by two stays to ensure stability.
increases coverage and may reduce the required height of the installation.
Quality
Quality The mounting tube and support tubes with brackets are made of anodized
The mounting tube and support tubes with brackets are made of anodized aluminium. This gives the system excellent corrosion resistance and a long
aluminium. The ballast box modules are made of galvanized steel compo- life. A 3 mm (0,12 in) EPDM rubber sheet is placed under the supports to
nents. This gives the system excellent corrosion resistance and a long life. protect the roof.
As an option A 3 mm (0,12 in) EPDM rubber sheet is placed under the ballast
boxes to protect the roof. Easy assembly
The choice of materials makes the product very light which makes the hand-
Easy assembly ling and installation very easy.
The module based ballast box system together with light weight aluminium

WIND ACCESSORIES
WIND ACCESSORIES

components makes the assembly extremely fast and easy.

supports & brackets


supports & brackets

ORDER AND Technical information


Ballast box system: Drawing No: CD 82393021 EPDM rubber sheet: dimension: 2,76 x 2,60 m (109 x 102 in) ORDER AND Technical information
Drawing No: CD 823174
FUNCTION DESCRIPTION: Freestanding non-penetrating rooftop.
Typical for installation of panel antennas, radio links or other common telecom equipment. FUNCTION DESCRIPTION: Fixed mounted roof top, typical for installation of panel antennas,
radio links or other common telecom equipment.
Mechanical data: mounting tube: Support tubes:
114, L = 6000 mm (4,5 in, L=236 in) 75, L = 4900 mm (3,0 in, L=193 in) Mechanical data:
Mounting tube: Support tubes: Tubes and Brackets U-bolts and Fasteners:
Package dimensions: Length: Width: Height: Weight: 75, L = 3000 (3,0 in, L=118 in) 40, L = 2600 (1,6 in, L=102 in) Aluminium, Nature anodized 20m Acid proof stainless steel
Package 1 6000 mm (236 in) 150 mm (5,9 in) 180 mm (7 in) 47 kg (103,6 lb)
Package 2 1200 mm (47,2 in) 800 mm (31,5 in) 910 mm (35,8 in) 540 kg (1190 lb) Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

Package 1 460 mm (18,1 in) 150 mm (5,9 in) 180 mm (7 in) 8,2 kg (18 lb)
ballast: Concrete slab 400 x 400 x 40 mm (15,7 x 15,7 x 1,6 in), Product number: 5621 Package 2 3000 mm (118 in) 100 mm (3,9 in) 150 mm (5,9 in) 11,8 kg (26 lb)
NOTE! Ballast not included. NOTE! Roof attachment bolts are not included.

84 85

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Dipod 3m Dipod 4m
product No: 1827 product No: 1831

The dipod rooftop system The dipod rooftop system


is a 3 m (10 ft) high fixed rooftop solution designed for installation of any kind is a 4 m (13 ft) high fixed rooftop solution designed for installation of any
of panel antenna, small radio link or other common telecom equipment. This kind of panel antenna, small radio link or other common telecom equipment.
version is optimized for high stability.

foundations & guy anchors


foundations & guy anchors

Flexibility
Flexibility The dipodsystem is a system with the capability of handling all possible roof
The dipodsystem is a system with the capability of handling all possible roof inclinations. The supports are bolted through the roof to ensure a firm an-
inclinations. The supports are bolted through the roof to ensure a firm an- choring. The antenna mounting tube is supported by two stays to ensure
choring. The antenna mounting tube is supported by two stays to ensure stability.
stability.
Quality
Quality The mounting tube and support tubes with brackets are made of anodized
The mounting tube and support tubes with brackets are made of anodized aluminium. This gives the system excellent corrosion resistance and a long
aluminium. This gives the system excellent corrosion resistance and a long life. A 3 mm (0,12 in) EPDM rubber sheet is placed under the Supports to
life. A 3 mm (0,12 in) EPDM rubber sheet is placed under the Supports to protect the roof.
protect the roof.
Easy assembly
Easy assembly The choice of materials makes the product very light which makes the hand-
The choice of materials makes the product very light which makes the hand- ling and installation very easy.
ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 823177 Drawing No: CD 823197

FUNCTION DESCRIPTION: Fixed mounted rooftop, typical for installation of panel antennas, FUNCTION DESCRIPTION: Fixed mounted roof top, typical for installation of panel antennas,
radio links or other common telecom equipment. radio links or other common telecom equipment.

Mechanical data: Mechanical data:


Mounting tube: Support tubes: Tubes and Brackets U-bolts and Fasteners: Mounting tube: Support tubes: Tubes and Brackets: U-bolts and Fasteners:
75, L = 3000 (3,0 in, L=118 in) 75, L = 2600 (3,0 in, L=102 in) Aluminium, Nature anodized 20m Acid proof stainless steel 90, L=4000 (3,5 in, L=157 in) 75, L = 3000 (3,0 in, L=118 in) Aluminium, Nature anodized 20m Acid proof stainless steel

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

Package 1 460 mm (18,1 in) 150 mm (5,9 in) 180 mm (7,1 in) 9,2 kg (20,3 lb) Package 1 460 mm (18,1 in) 150 mm (5,9 in) 180 mm (7,1 in) 11,5 kg (25,3 lb)
Package 2 3000 mm (118 in) 150 mm (5,9 in) 150 mm (5,9 in) 19 kg (41,9 lb) Package 2 4000 mm (157 in) 150 mm (5,9 in) 200 mm (7,9 in) 29 kg (64 lb)
NOTE! Roof attachment bolts are not included. NOTE! Roof attachment bolts are not included.

86 87

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Dipod 5m Dipod 6m
product No: 3193 product No: 1834

The dipod rooftop system The dipod rooftop system


is a 5 m (16 ft) high fixed rooftop solution designed for installation of any is a 6 m (20 ft) high fixed rooftop solution designed for installation of any
kind of panel antenna, small radio link or other common telecom equipment. kind of panel antenna, small radio link or other common telecom equipment.

foundations & guy anchors


foundations & guy anchors

Flexibility Flexibility
The dipodsystem is a system with the capability of handling all possible roof The dipodsystem is a system with thecapability of handling all possible roof
inclinations. The supports are bolted through the roof to ensure a firm an- inclinations. The supports are bolted through the roof to ensure a firm an-
choring. The antenna mounting tube is supported by two stays to ensure choring. The antenna mounting tube is supported by two stays to ensure
stability. stability.

Quality Quality
The mounting tube and support tubes with brackets are made of anodized The mounting tube and support tubes with brackets are made of anodized
aluminium. This gives the system excellent corrosion resistance and a long aluminium. This gives the system excellent corrosion resistance and a long
life. A 3 mm (0,12 in) EPDM rubber sheet is placed under the Supports to life. A 3 mm (0,12 in) EPDM rubber sheet is placed under the Supports to
protect the roof. protect the roof.

Easy assembly Easy assembly


The choice of materials makes the product very light which makes the hand- The choice of materials makes the product very light which makes the hand-
ling and installation very easy. ling and installation very easy.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information ORDER AND Technical information


Drawing No: CD 823117 5MS Drawing No: CD 823117 6M

FUNCTION DESCRIPTION: Fixed mounted rooftop, typical for installation of panel antennas, FUNCTION DESCRIPTION: Fixed mounted rooftop, typical for installation of panel antennas,
radio links or other common telecom equipment. radio links or other common telecom equipment.

Mechanical data: Mechanical data:


Mounting tube: Support tubes: Tubes and Brackets: U-bolts and Fasteners: Mounting tube: Support tubes: Tubes and Brackets: U-bolts and Fasteners:
114, L=5000 (4,5 in, L=197 in) 75, L=3900 (3,0 in, L=153,5 in) Aluminium, Nature anodized 20m Acid proof stainless steel 114, L=6000 (4,5 in, L=236 in) 75, L=4900 (3,0 in, L=193 in) Aluminium, Nature anodized 20m Acid proof stainless steel

Package dimensions: Length: Width: Height: Weight: Package dimensions: Length: Width: Height: Weight:

rooftop solutions
rooftop solutions

Package 1 460 mm (18,1 in) 150 mm (5,9 in) 180 mm (7 in) 11,5 kg (25,3 lb) Package 1 460 mm (18,1 in) 150 mm (5,9 in) 180 mm (7 in) 11,5 kg (25,3 lb)
Package 2 5000 mm (197 in) 150 mm (5,9 in) 250 mm (9,8 in) 46,5 kg (102,5 lb) Package 2 6000 mm (236 in) 150 mm (5,9 in) 250 mm (9,8 in) 54 kg (119 lb)
NOTE! Roof attachment bolts are not included. NOTE! Roof attachment bolts are not included.

88 89

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Alubra beams Alubra 50-4 Alubra 75-2

The Alubra beams


are the basic components of several light weight constructions. There are product No: LENGth: mm (in) DRAWING NO: product No: LENGth: mm (in) DRAWING NO:
four different beams available,100 mm (4,0 in) side with 4 grooves, 75 mm
7101 L=500 (20 in) CD 850005 2042 L=500 (20 in) CD 840005
(3,0 in) side with 2 or 4 grooves and 50 mm (2,0 in) side with 4 grooves.

foundations & guy anchors


foundations & guy anchors

7102 L=1000 (39 in) CD 850010 1961 L=1000 (39 in) CD 840010
Quality
The ALUBRA beams are made of age hardened anodized aluminium which 7103 L=1500 (59 in) CD 850015 2011 L=1500 (59 in) CD 840015
gives the beams excellent corrosion resistance and strength. 7104 L=2000 (79 in) CD 850020 4810 L=2000 (79 in) CD 840020

Easy assembly 7105 L=2500 (98 in) CD 850025 2221 L=2500 (98 in) CD 840025
The choice of material makes the product very light which makes the hand- 7106 L=3000 (118 in) CD 850030 2014 L=3000 (118 in) CD 840030
ling and installation very easy.
7107 L=3500 (138 in) CD 850035 5736 L=3500 (138 in) CD 840035
Flexibility 7108 L=4000 (157,5 in) CD 850040 5737 L=4000 (157,5 in) CD 840040
The grooves on the side of the beam fits an M12 bolt with washer, that ena-
bles easy assembly to clamps, angles or brackets of almost any kind. 7109 L=4500 (177 in) CD 850045 5738 L=4500 (177 in) CD 840045
7110 L=5000 (197 in) CD 850050 5739 L=5000 (197 in) CD 840050

Example of application 7111 L=5500 (216,5 in) CD 850055 5740 L=5500 (216,5 in) CD 840055
with Alubra bars
7112 L=6000 (236 in) CD 850060 5741 L=6000 (236 in) CD 840060

WIND ACCESSORIES
WIND ACCESSORIES

Alubra 75-4 Alubra 100-4


ORDER AND Technical information

50/4 75/2 75/4 100/4

product No: LENGth: mm (in) DRAWING NO: product No: LENGth: mm (in) DRAWING NO:
1968 L=500 (20 in) CD 870005 5747 L=500 (20 in) CD 810005

supports & brackets


supports & brackets

2202 L=1000 (39 in) CD 870010 5748 L=1000 (39 in) CD 810010
2532 L=1500 (59 in) CD 870015 5749 L=1500 (59 in) CD 810015
2088 L=2000 (79 in) CD 870020 5750 L=2000 (79 in) CD 810020
product name: product name: product name: product name: 2573 L=2500 (98 in) CD 870025 5751 L=2500 (98 in) CD 810025
50/4 75/2 75/4 100/4
5078 L=3000 (118 in) CD 870030 5752 L=3000 (118 in) CD 810030
Drawing No: Drawing No: Drawing No: Drawing No: 2956 L=3500 (138 in) CD 870035 5753 L=3500 (138 in) CD 810035
CD 8500 CD 8400 CD 8700 CD 8100
5742 L=4000 (157,5 in) CD 870040 2099 L=4000 (157,5 in) CD 810040
FUNCTION DESCRIPTION: FUNCTION DESCRIPTION: FUNCTION DESCRIPTION: FUNCTION DESCRIPTION: 5743 L=4500 (177 in) CD 870045 5754 L=4500 (177 in) CD 810045
50 x 50 mm, 4 grooves 75 x 75 mm, 2 grooves 75 x 75 mm, 4 grooves 100 x 100 mm, 4 grooves
(2,0 x 2,0 in) (3,0 x 3,0 in) (3,0 x 3,0 in) (4,0 x 4,0 in) 5744 L=5000 (197 in) CD 870050 5755 L=5000 (197 in) CD 810050
5745 L=5500 (216,5 in) CD 870055 5756 L=5500 (216,5 in) CD 810055
Weight per Meter: Weight per Meter: Weight per Meter: Weight per Meter:

rooftop solutions
rooftop solutions

2,5 kg (5,5 lb) 3,3 kg (7,3 lb) 4,6 kg (10,1 lb) 5,5 kg (12,1 lb) 5746 L=6000 (236 in) CD 870060 5757 L=6000 (236 in) CD 810060

90 91

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


ORDER AND Technical information

Mounting tubes p/n: tube: mm (in) LENGth: m (ft)


5672 40 x 3 (1,6 x 0,12) 1 (3,3)
p/n:
5683
tube: mm (in) LENGth: m (ft)
40 x 5 (1,6 x 0,20) 1 (3,3)
p/n: tube: mm (in) LENGth: (ft)
5694 50 x 3 (2,0 x 0,12) 1 (3,3)
5673 40 x 3 (1,6 x 0,12) 1,5 (4,9) 5684 40 x 5 (1,6 x 0,20) 1,5 (4,9) 5695 50 x 3 (2,0 x 0,12) 1,5 (4,9)
5674 40 x 3 (1,6 x 0,12) 2 (6,6) 5685 40 x 5 (1,6 x 0,20) 2 (6,6) 5696 50 x 3 (2,0 x 0,12) 2 (6,6)
5675 40 x 3 (1,6 x 0,12) 2,5 (8,2) 5686 40 x 5 (1,6 x 0,20) 2,5 (8,2) 5697 50 x 3 (2,0 x 0,12) 2,5 (8,2)
5676 40 x 3 (1,6 x 0,12) 3 (9,8) 5687 40 x 5 (1,6 x 0,20) 3 (9,8) 5698 50 x 3 (2,0 x 0,12) 3 (9,8)
5677 40 x 3 (1,6 x 0,12) 3,5 (11,5) 5688 40 x 5 (1,6 x 0,20) 3,5 (11,5) 5699 50 x 3 (2,0 x 0,12) 3,5 (11,5)

foundations & guy anchors


foundations & guy anchors

5678 40 x 3 (1,6 x 0,12) 4 (13,1) 5689 40 x 5 (1,6 x 0,20) 4 (13,1) 5700 50 x 3 (2,0 x 0,12) 4 (13,1)
5679 40 x 3 (1,6 x 0,12) 4,5 (14,8) 5690 40 x 5 (1,6 x 0,20) 4,5 (14,8) 5701 50 x 3 (2,0 x 0,12) 4,5 (14,8)
5680 40 x 3 (1,6 x 0,12) 5 (16,4) 5691 40 x 5 (1,6 x 0,20) 5 (16,4) 5702 50 x 3 (2,0 x 0,12) 5 (16,4)
5681 40 x 3 (1,6 x 0,12) 5,5 (18,0) 5692 40 x 5 (1,6 x 0,20) 5,5 (18,0) 5703 50 x 3 (2,0 x 0,12) 5,5 (18,0)
5682 40 x 3 (1,6 x 0,12) 6 (19,7) 5693 40 x 5 (1,6 x 0,20) 6 (19,7) 5704 50 x 3 (2,0 x 0,12) 6 (19,7)

p/n: tube: mm (in) LENGth: m (ft) p/n: tube: mm (in) LENGth: m (ft) p/n: tube: mm (in) LENGth: m (ft)
5705 50 x 5 (2,0 x 0,20) 1 (3,3) 2002 60 x 3 (2,4 x 0,12) 1 (3,3) 2004 75 x 3,5 (3,0 x 0,14) 1 (3,3)
5706 50 x 5 (2,0 x 0,20) 1,5 (4,9) 1949 60 x 3 (2,4 x 0,12) 1,5 (4,9) 1956 75 x 3,5 (3,0 x 0,14) 1,5 (4,9)
5707 50 x 5 (2,0 x 0,20) 2 (6,6) 1948 60 x 3 (2,4 x 0,12) 2 (6,6) 1950 75 x 3,5 (3,0 x 0,14) 2 (6,6)

WIND ACCESSORIES
5708 50 x 5 (2,0 x 0,20) 2,5 (8,2) 1967 60 x 3 (2,4 x 0,12) 2,5 (8,2) 1958 75 x 3,5 (3,0 x 0,14) 2,5 (8,2)
WIND ACCESSORIES

The Mounting tubes Easy assembly 5709 50 x 5 (2,0 x 0,20) 3 (9,8) 2003 60 x 3 (2,4 x 0,12) 3 (9,8) 1919 75 x 3,5 (3,0 x 0,14) 3 (9,8)
can be used as a support for panel antennas, small radio links or other com- The choice of material makes the product very light which makes the hand- 5710 50 x 5 (2,0 x 0,20) 3,5 (11,5) 5716 60 x 3 (2,4 x 0,12) 3,5 (11,5) 3309 75 x 3,5 (3,0 x 0,14) 3,5 (11,5)
mon telecom equipment. And also as an extension of existing tubes. ling and installation very easy.
5711 50 x 5 (2,0 x 0,20) 4 (13,1) 5717 60 x 3 (2,4 x 0,12) 4 (13,1) 1920 75 x 3,5 (3,0 x 0,14) 4 (13,1)
Quality Flexibility 5712 50 x 5 (2,0 x 0,20) 4,5 (14,8) 5718 60 x 3 (2,4 x 0,12) 4,5 (14,8) 5722 75 x 3,5 (3,0 x 0,14) 4,5 (14,8)
The mounting tubes are made of age hardened anodized aluminium which Mounting tubes are available in diameters between 40 mm (1,6 in) and
5713 50 x 5 (2,0 x 0,20) 5 (16,4) 5719 60 x 3 (2,4 x 0,12) 5 (16,4) 5723 75 x 3,5 (3,0 x 0,14) 5 (16,4)
gives the tubes excellent corrosion resistance and strength. 114 mm (4,5 in) at custom lengths up to 6000 mm (236 in).
5714 50 x 5 (2,0 x 0,20) 5,5 (18,0) 5720 60 x 3 (2,4 x 0,12) 5,5 (18,0) 5724 75 x 3,5 (3,0 x 0,14) 5,5 (18,0)
5715 50 x 5 (2,0 x 0,20) 6 (19,7) 5721 60 x 3 (2,4 x 0,12) 6 (19,7) 4585 75 x 3,5 (3,0 x 0,14) 6 (19,7)
ORDER AND Technical information
Identification: Mounting tube: Typical Application: mm (in) t mm (in) Weight: kg/m (lb)
CD 7040 40 x 3 mm (1,6 x 0,12 in) Small antennas and telecom equipment 40 (1,6) 3 (0,12) 0,94 (2) p/n: tube: mm (in) LENGth: m (ft) p/n: tube: mm (in) LENGth: m (ft) p/n: tube: mm (in) LENGth: m (ft)

supports & brackets


supports & brackets

CD 7041 40 x 5 mm (1,6 x 0,20 in) Small antennas and telecom equipment 40 (1,6) 5 (0,20) 1,4 (3,1) 2108 75 x 5 (3,0 x 0,20) 1 (3,3) 3011 90 x 5 (3,5x 0,20) 1 (3,3) 5732 114 x 5 (4,5 x 0,20) 1 (3,3)
CD 7050 50 x 3 mm (2,0 x 0,12 in) Small antennas and telecom equipment 50 (2,0) 3 (0,12) 1,2 (2,6) 5594 75 x 5 (3,0 x 0,20) 1,5 (4,9) 2006 90 x 5 (3,5 x 0,20) 1,5 (4,9) 2041 114 x 5 (4,5 x 0,20) 1,5 (4,9)
CD 7051 50 x 5 mm (2,0 x 0,20 in) Small antennas and telecom equipment 50 (2,0) 5 (0,20) 1,91 (4,2) 2220 75 x 5 (3,0 x 0,20) 2 (6,6) 2007 90 x 5 (3,5 x 0,20) 2 (6,6) 2096 114 x 5 (4,5 x 0,20) 2 (6,6)
CD 7060 60 x 3 mm (2,4 x 0,12 in) Panel antennas, small radio links etc. 60 (2,4) 3 (0,12) 1,45 (3,2) 5595 75 x 5 (3,0 x 0,20) 2,5 (8,2) 2008 90 x 5 (3,5 x 0,20) 2,5 (8,2) 1978 114 x 5 (4,5 x 0,20) 2,5 (8,2)
CD 7075 75 x 3,5 mm (3,0 x 0,14 in) Panel antennas, small radio links etc. 75 (3,0) 3,5 (0,14) 2,12 (4,7) 1994 75 x 5 (3,0 x 0,20) 3 (9,8) 2009 90 x 5 (3,5 x 0,20) 3 (9,8) 1959 114 x 5 (4,5 x 0,20) 3 (9,8)
CD 7076 75 x 5 mm (3,0 x 0,20 in) Panel antennas, small radio links etc. 75 (3,0) 5 (0,20) 2,97 (6,5) 5725 75 x 5 (3,0 x 0,20) 3,5 (11,5) 3540 90 x 5 (3,5 x 0,20) 3,5 (11,5) 5733 114 x 5 (4,5 x 0,20) 3,5 (11,5)
CD 7090 90 x 5 mm (3,5 x 0,20 in) Panel antennas, radio links etc. 90 (3,5) 5 (0,20) 3,61 (8) 1218 75 x 5 (3,0 x 0,20) 4 (13,1) 2410 90 x 5 (3,5 x 0,20) 4 (13,1) 1922 114 x 5 (4,5 x 0,20) 4 (13,1)
CD 7114 114 x 5 mm (4,5 x 0,20 in) Panel antennas, radio links etc. 114 (4,5) 5 (0,20) 4,62 (10,2) 5726 75 x 5 (3,0 x 0,20) 4,5 (14,8) 3847 90 x 5 (3,5 x 0,20) 4,5 (14,8) 5734 114 x 5 (4,5 x 0,20) 4,5 (14,8)
CD 7120 120 x 6 mm (4,7 x 0,24 in) Rooftops/Monopoles 120 (4,7) 6 (0,24) 5,8 (12,8) 5727 75 x 5 (3,0 x 0,20) 5 (16,4) 5730 90 x 5 (3,5 x 0,20) 5 (16,4) 2411 114 x 5 (4,5 x 0,20) 5 (16,4)
CD 7150 150 x 5 mm (5,9 x 0,20 in) Rooftops/Monopoles 150 (5,9) 5 (0,20) 6,15 (13,5) 5728 75 x 5 (3,0 x 0,20) 5,5 (18,0) 5731 90 x 5 (3,5 x 0,20) 5,5 (18,0) 5735 114 x 5 (4,5 x 0,20) 5,5 (18,0)

rooftop solutions
rooftop solutions

CD 7200 202 x 4 mm (7,95 x 0,16 in) Rooftops/Monopoles 202 (7,95) 4 (0,16) 8,92 (19,7) 5729 75 x 5 (3,0 x 0,20) 6 (19,7) 3952 90 x 5 (3,5 x 0,20) 6 (19,7) 1921 114 x 5 (4,5 x 0,20) 6 (19,7)

92 93

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com www.cuedee.com
MASTS & TOWERS

MASTS & TOWERS


Climbing Step CABLE holder
PRODUCT No: 3099 PRODUCT No: 2622 / 2621 / 1614

The Climbing Step THE CABLE HOLDER


is suitable for any tube with diameter between 90-114 mm (3,5-4,5 in). is designed to be an attachment point for any type of cable that is installed
Each climbing step has a connection point to ensure safe climbing. on a site, mast or tower.

foundations & guy anchors


foundations & guy anchors

Flexibility FLEXIBILITY
Fits any tube with an outer diameter between 90-114 mm (3,5-4,5 in). The Cable Holders have a total mounting span of 25-76 mm (1,0-3,0 in),
there are other sizes available upon request.
Quality
The climbing steps are made from galvanized steel and the fasteners from QUALITY
stainless steel. This gives the product excellent corrosion resistance. All components are made of galvanized and stainless steel which gives the
Cable Holder high strength and excellent corrosion resistance.
Easy Assembly
The U-Bolts and nuts are pre waxed upon delivery to ensure a smooth and EASY ASSEMBLY
easy installation. Installation of the Cable Holder is very easy, attach the U-Bolt to the frame leg
and tighten the nuts then attach the cables.

WIND ACCESSORIES
WIND ACCESSORIES

supports & brackets


supports & brackets

ORDER AND Technical information


Drawing No: CD 735012
ORDER AND Technical information
FUNCTION DESCRIPTION: Climbing Step for mounting on any tube with diameter between 90-114 mm (3,5-4,5 in).
Drawing No: CD 101936 (25-40 mm) / CD 101937 (40-60 mm) / CD 101938 (60-76 mm)
Mechanical data:
Climbing step Hot-dip galvanized steel FUNCTION DESCRIPTION: Galvanized cable holder, fits round frame legs 25-76 mm (1,0-3,0 in).
Fasteners Acid proof stainless steel It is possible to install a number of feeder cables together with this bracket.

Mechanical data: Protruding from mast: clamping range: Weight:

rooftop solutions
Package dimensions: Length: width: Height: Weight:
rooftop solutions

300 mm (12 in) 150 mm (6,0 in) 50 mm (2,0 in) 1,7 kg (3,7 lb) 230 mm (9 in) 25-76 mm (1,0-3,0 in) 1,2 kg (2,6 lb)

94 95

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d P R O D U c T c A T A L O G u e t e l e c o m / W I N D C U E D EE y our inno v ati v e partn e r


www.cuedee.com
Cue Dee develops and markets innovative
Part of Lagercrantz Group Find us on Linked In
solutions covering the wind and telecom industry
MASTS & TOWERS

WELCOME TO CONTACT US

Copyright CUE DEE


foundations & guy anchors

HEAD QUARTERS: CUE DEE AB, SIKE 58, SE-915 93 ROBERTSFORS, SWEDEN

PRODUCTION BY: CUE DEE 2017


Tel: +46 934 153 10
Fax: +46 934 150 72
Overall E-mail adress: info@cuedee.com
Sales E-mail adress: market@cuedee.com
ORDER E-mail adress: order@cuedee.se
Personnel: firstname.lastname@cuedee.com
web: www.cuedee.com
WIND ACCESSORIES
supports & brackets

CHINA INDIA U.S.A


Anne Qiu / Sales Manager APAC region Paresh Gupta / Business Head- India region & MEA Hakan Andersson / Head of the Americas
Mobile: +86 139 0515 7159 Mobile: +91 9810175844/ +91 9910429690 Mobile: +1 (601) 212-3462
E-mail: anne.qiu@cuedee.com E-mail: paresh.gupta@cuedee.com E-mail: hakan.andersson@cuedee.com
Cue Dee (Suzhou) Trading Co., Ltd Cue Dee India Private Limited 294 Surrey Crossing Ridgeland, MS 39157
Room 422, Century Financial Tower Plot# 77B, Sector 5, IMT Manesar
No. 1 Suzhou Da Dao West Gurgaon 122050, Haryana, India
rooftop solutions

96

y our i n n o v at i v e part n e r C U E D EE P R O D U c T c A T A L O G u e t e l e co m / w i n d

Das könnte Ihnen auch gefallen