Beruflich Dokumente
Kultur Dokumente
Special Tool(s)
Vehicle Communication Module (VCM) and Integrated
Diagnostic System (IDS) software with appropriate
hardware, or equivalent scan tool
1. The adaptive learning procedures and self-tests should be done with the Vehicle Communication Module (VCM) and
Integrated Diagnostic System (IDS) .
2. NOTE:The VCMLED prove-out confirms power and ground from the Data Link Connector (DLC) to the VCM.
5. Verify that the calibration file is present on the scan tool. If the file is present, go to Step 10. If the file is not present, continue
with this procedure.
6. Update the PCM/Transmission Control Module (TCM) calibration. Calibration files maybe obtained at Professional Technician
Society (PTS) website. Independent Technicians refer to www.motorcraft.com.
The scan tool checks to see if the file is present on the scan tool. If the calibration file is present, the technician may proceed
with downloading the file to the PCM/ TCM. If the file is not present, the scan tool will need to be connected to the server to
download the file onto the scan tool.
http://dh.identifix.com/SearchFixes/Index?ROID=174303470&VID=2377673&VSM=1&LocationId=2#KW=P287B&SOption=1&VETId=8&STMode=1&Paging=&SMode=2&position=0 1/5
8/9/2017 Direct-Hit -- Bsqueda
8. Follow the instructions on the network to download the strategy file to the scan tool.
9. If the scan tool cannot connect to the PTSserver, download the file from www.motorcraft.com.
If the scan tool cannot download a strategy from the web site, a partial strategy will automatically be downloaded.
TCMReprogramming
1. Using the scan tool, navigate to the Module Reprogramming sub menu.
1. Module Programming
2. Module Reprogramming
3. TCM
TCMProgramming
1. Using the scan tool, navigate to the Module Reprogramming sub menu.
1. Module Programming
2. Programmable Module Installation
3. TCM
1. Using the scan tool, navigate to the TCMAdaptive Learning sub menu.
1. PCM
2. TCM
3. TCMAdaptive Learning
2. Select TRsensor.
1. Using the scan tool, navigate to the TCMAdaptive Learning sub menu.
1. PCM
2. Transmission
http://dh.identifix.com/SearchFixes/Index?ROID=174303470&VID=2377673&VSM=1&LocationId=2#KW=P287B&SOption=1&VETId=8&STMode=1&Paging=&SMode=2&position=0 2/5
8/9/2017 Direct-Hit -- Bsqueda
3. TCMAdaptive Learning
1. Using the scan tool, navigate to the TCMAdaptive Learning sub menu.
1. PCM
2. Transmission
3. TCMAdaptive Learning
2. Select Clutch.
1. Using the scan tool, navigate to the TCMAdaptive Learning sub menu.
1. PCM
2. Transmission
3. Clutch System Test
1. Using the scan tool, navigate to the TCMAdaptive Learning sub menu.
1. PCM
2. Transmission
3. Speed Sensor Test
Drive Cycle
NOTICE: If a drive cycle is not completed, the customer may feel erratic shifts and driveability concerns.
NOTE:To perform drive cycle, drive the vehicle on a level road surface.
http://dh.identifix.com/SearchFixes/Index?ROID=174303470&VID=2377673&VSM=1&LocationId=2#KW=P287B&SOption=1&VETId=8&STMode=1&Paging=&SMode=2&position=0 3/5
8/9/2017 Direct-Hit -- Bsqueda
2. Shift to Drive.
3. Wait 15 seconds.
4. Shift to Reverse.
5. Wait 2 seconds.
9. Repeat steps (7-8) five (5) times in dealership parking lot or similar setting.
10. Accelerate from a stop with light throttle performing 1-2, 2-3, 3-4 shifts maintaining 1700-2000 rpm.
11. Accelerate to a speed between 50 mph (80 km/h) and 65 mph (104 km/h), achieve 6th gear, keep throttle steady with engine
below 3000 rpm for a minimum of two (2) minutes.
http://dh.identifix.com/SearchFixes/Index?ROID=174303470&VID=2377673&VSM=1&LocationId=2#KW=P287B&SOption=1&VETId=8&STMode=1&Paging=&SMode=2&position=0 4/5
8/9/2017 Direct-Hit -- Bsqueda
This publication contains material that is reproduced and distributed under a license from Ford Motor Company. No further
reproduction or distribution of the Ford Motor Company material is allowed without the express written permission of Ford Motor
Company.
http://dh.identifix.com/SearchFixes/Index?ROID=174303470&VID=2377673&VSM=1&LocationId=2#KW=P287B&SOption=1&VETId=8&STMode=1&Paging=&SMode=2&position=0 5/5