Sie sind auf Seite 1von 1

`

MATERIAL SAFETY DATA SHEET VANADIUM PENTOXIDE


PRODUCT IDENTIFICATION (Vanadium pentoxide)
FIRST AID MEASURES
INHALATION INGESTION SKIN CONTACT EYE CONTACT
If inhaled, remove to fresh air. If not If swallowed, do not induce vomiting unless directed to do In case of contact, immediately flush skin with plenty of water for Check for and remove any contact
breathing, give artificial respiration. If so by medical personnel. Never give anything by mouth to at least 15 minutes while removing contaminated clothing and lenses. In case of contact, immediately
breathing is difficult, give oxygen. Get an unconscious person. Loosen tight clothing such as a shoes. Cover the irritated skin with an emollient. Cold water may flush eyes with plenty of water for at
medical attention immediately. collar, tie, belt or waistband. Get medical attention be used. Wash clothing before reuse. Thoroughly clean shoes least 15 minutes. Cold water may be
immediately. before reuse. used.

FIRE-FIGHTING MEASURES
EXTINGUISHUING MEDIA HAZARDOUS COMBUSTION PRODUCTS SPECIAL PROTECTIVE EQUIPMENT
Di-vanandium pentoxide; Vanadic anhydride; NA Splash goggles. Lab coat. Dust respirator. Be sure to use an
Vanadium Pentaoxide approved/certified respirator or equivalent. Gloves.
ACCIDENTAL RELEASE MEASURES
PERSONAL PRECAUTION ENVIRONMENTAL PRECAUTION METHODS & MATERIALS FOR CLEANING UP
Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained Waste must be disposed of in accordance with Prevent entering sewage systems or surface water. Vacuum preferred (or sweeping).
breathing apparatus should be used to avoid inhalation of the product. federal, state and local environmental control Addition of sand or sweeping compound is advisable. Avoid decontamination
Suggested protective clothing might not be sufficient; consult a specialist regulations. procedures which create airborne dusting. Use ventilation if necessary to control
BEFORE handling this product. dusting.

HANDLING AND STORAGE


HANDLING PPEs COMPATIBLE MATERIALS OF CONSTRUCTION STORAGE
Avoid areas where dust is present. Keep dry Use respirators approved by NIOSH/MSHA in Incompatible materials: Incompatible with water, sodium, polar solvents, Store in a closed steel container under a
and in closed containers. Incompatible dusty areas. Use goggles or safety glasses with most plastics, aluminum. dry inert-gas blanket. Storage area
materials: Incompatible with aluminum side shields. Use protective gloves and barrier should be well ventilated. Protect
powder. creams. containers from temperature cycling
which may cause breathing.

PHYSICAL AND CHEMICAL PROPERTIES


PHYSICAL STATE ODOR pH DENSITY
Pale Yellow Clear Liquid Acrid NA NA
REACTIVITY INFORMATION
CHEMICAL STABILITY CONDITIONS TO AVOID INCOMPATIBLE MATERIALS HAZARDOUS DECOMPOSITION PRODUCTS

Avoid exposure to heat, moisture. Aqueous Reactive with acids, alkalis. NA


The product is stable.
solutions react with aluminium and forms hydrogen.

Prepared by TALHA JAMIL

Das könnte Ihnen auch gefallen