Sie sind auf Seite 1von 2

Calibration Certificate / Certificado de Calibracin No.

124722

Metrologa Aplicada y Servicios S de RL de CV


Blvd. Manuel Gmez Morn 8009, Partido Senec C.P. 32470
Cd. Jurez, Chih., Mxico
Tels. (656) 617-6617, 207-3949 y 01-800-CALIBRA (225-4272)
www.masmetrologia.com
Accreditation # 22580
INSTRUMENT INFORMATION/INFORMACION DEL INSTRUMENTO CAL. CONDITIONS/CONDICIONES DE LA CALIBRACION

I.D.: MLM-MAS-018 PERFORMED ON: 14 noviembre 2016


DESCRIPTION: Bascula DUE DATE: 14 noviembre 2017
MANUFACTURER: Salter Brecknell TEMPERATURE: 22.00 C
MODEL: SBI-505 HUMIDITY: 35 % H.R.
SERIAL NUMBER: 140725033 DATA TYPE: AS FOUND-AS LEFT
PROCEDURE NAME: MET-04.5.00102

CUSTOMER INFORMATION/INFORMACION DEL CLIENTE: INSTRUMENT CONDITIONS/CONDICIONES DEL INSTRUMENTO:

Metrologia Aplicada y Servicios, S de RL de CV Buenas Condiciones


Blvd. Gomez Morin #8009
Cd. Jurez, Chihuahua 32470

Calibration statement / Declaraciones Generales de la calibracin


Metrologa Aplicada y Servicios S de RL de CV certifies that the above listed instrument met or exceeds the published specifications unless otherwise
noted and has been calibrated in accordance with Metrologia Aplicada y Servicios Quality assurance manual that is accredited under ISO /IEC 17025:2005
requirements, This Calibration report documents the traceability to National Institutes (NIST & CENAM) which realize the units of measurements
according to the International System of Units (SI), this report shall not be used to claim product endorsement by the accrediting body.
-This report may not be reproduced, except in full, unless permission for the publication of an approved abstract is obtained in writing for Metrologia
Aplicada y Servicios S. de R.L. de C.V. the user may be obliged to have the object recalibrated at appropriated intervals we recommend the use of OIML
D10, NCSL RP-1 or ISO 10012.
-Measurement uncertainties at the time of the test, are given on the following pages, where applicable. They are calculated in accordance with ISO /IEC
Guide 98:1995 Guide to the expression of Uncertainty in Measurement (GUM).
-This calibration certificate may contain data that is not covered by our scope of accreditation. Unaccredited data, where applicable is indicated by an
asterisk (*).
Metrologa Aplicada y Servicios S de RL de CV Certifica que el instrumento arriba descrito cumple o excede las especificaciones publicadas a menos
que se indique lo contrario y fue calibrado de acuerdo con el manual de aseguramiento de la calidad de Metrologia Aplicada y Servicios acreditado
segun los requisitos de ISO/IEC 17025:2005, Este informe de calibracion documenta la trazabilidad a Institutos Nacionales (NIST & CENAM) mismos
que resguardan las unidades de medida de acuerdo con el Sistema Internacional de Unidades (SI) El presente informe no podra ser usado para reclamar
aprobacion de producto por parte de la compaia que nos acredita.
-Este informe de calibracion no debe ser reproducido de forma parcial sin la autorizacion escrita de Metrologia Aplicada y Servicios S. de R .L. de C.V. ,
El usuario puede verse obligado a tener por objetivo calibrar a intervalos apropiados para lo cual se recomienda se base en las recomendaciones OIML
D10, NCSL RP-1 o la norma ISO 10012.
-Donde sea aplicable la estimacion de las incertidumbres al momento de la calibracion es expresada en las siguientes paginas y fueron estimadas en
base a ISO/IEC Guide 98:1995 Guide to the expression of Uncertainty in Measurement (GUM).
-Este Certificado de calibracin puede contener datos que no estn cubiertos por nuestro alcance de acreditacin. En su caso los datos no acreditados
estn marcados con un asterisco (*).

Standards Used
Asset # Description Traceability Number Cal Date Due Date
MLM-MAS-009 Troemner AVOIRDUPOIS Juego de pesas NIST-F-200k 113259 2016-03-05 2017-03-05
MLM-TEM-027 Extech Instruments HW30 Humidity/Temperature Stopwatch 117707 2016-06-10 2017-06-10

Calibrated By:/Calibrado por: Authorized By:/Autorizado por:

Mauricio Arguijo
Calibration Tech./Tecnico de Calibracion

-Any questions, comments, suggestions or complaints regarding this service, or the content of this calibration report please send to sugerencias@masmetrologia.com
-Cualquier duda comentario, sugerencia o queja en relacion con este servicio, o el contenido de este informe de calibracion favor de dirigirlo a sugerencias@masmetrologia.com

MET-06.7-1/11 Pgina 1 de 2
No. 124722

Test Results

Test Description True Value Test Result Lower limit Upper limit Units Status Uncert ()
Linearity test 40.0 40.0 39.9 40.1 kg Pass 1.0E-01
Linearity test 80.0 80.0 79.8 80.2 kg Pass 1.0E-01
Linearity test 120.0 120.0 119.8 120.2 kg Pass 1.0E-01
Linearity test 160.0 160.0 159.8 160.2 kg Pass 1.0E-01
Linearity test 200.0 200.0 199.8 200.2 kg Pass 1.0E-01
*Corner Test (200 kg) 0.0 0.0 -0.2 0.2 kg Pass N/A
*Repeatability (500 0.0 0.0 -0.3 0.3 kg Pass N/A
kg)
*Repeatability (1000 0.0 0.0 -0.3 0.3 kg Pass N/A
kg)

End of Certificate/Fin del Certificado

-Any questions, comments, suggestions or complaints regarding this service, or the content of this calibration report please send to sugerencias@masmetrologia.com
-Cualquier duda comentario, sugerencia o queja en relacion con este servicio, o el contenido de este informe de calibracion favor de dirigirlo a sugerencias@masmetrologia.com

MET-06.7-1/11 Pgina 2 de 2

Das könnte Ihnen auch gefallen