Sie sind auf Seite 1von 2

TM

Our products make us industry leaders.

Our people make us world class.

Christopher M. Nook
CEO
H e l i x L i n e a r Te c h n o l o g i e s , I n c .
TRUNION MOUNTED NUTS

2nd Edition Supplement

TM

23200 Commerce Park Road | Beachwood, OH 44122 USA | 1-855-HELIXLT or 216-485-2232 | www.helixlinear.com | email: sales@helixlinear.com w w w . h e l i x l i n e a r . c o m
TM

PRECISION MINIATURE
LEAD SCREW ASSEMBLIES

TRUNION MOUNT NUT TRUNION MOUNT NUT

TMA025 062 RA / 1K / 4N / 12.25 / FS

TRUNION MOUNT NUT


NUT MATERIAL CODE
A = Blue Acetal
B = Black Acetal
C = Natural (white) Acetal
D = Delrin AF
"D" E = Helix Bronze
F = Torlon
4X "C" X 45
DIAMETER CODE
OIL VISCOSITY Example:
"E" 025 = 1/4 Diameter
See pages (7882) for Diameter Codes

LEAD CODE
Example
062 = 0.0625 Lead
"F" SCREW DIA. See pages (7882) for Lead Codes
"A"
"G"
SCREW MATERIAL
R = Right Hand Thread RA A= Alloy Steel, Rolled
L = Left Hand Thread B= Alloy Steel, Milled
C= Alloy Steel, Ground
NOTE: S= Stainless Steel, Rolled
Not all threads/materials are T = Stainless Steel, Milled
available for all sizes. U= Stainless Steel, Ground

"B" FIRST END CONFIGURATION


"A"
End Machining 1K Shaft Extension (see pages 86-90)
1 = Type 1 K = Shaft Extension
2 = Type 2 L = Shaft Extension without Keyway
3 = Type 3 N = No Shaft Extension
4 = Type 4

B = Universal Double Bearing Support G = Flanged Single Bearing Support


End Cap Facing Screw Thread Flange Away From Screw Thread
C = Universal Single H = Flanged Double Bearing Support
Bearing Support Flange Away From Screw Thread
D = Flanged Single Bearing Support 00 = No End Machining (Screw will be
DIM "G" - SCREW cut to desired length)
PART NO.* DIM "A" DIM "B" DIM "C" DIM "D" DIM "E" DIM "F" Flange Facing Screw Thread
INCH METRIC E = Universal Double Bearing Support XX = Custom Machining (Print or
spedified data must be provided)
TM-01 0.220 0.250 0.03 0.125 0.050 0.320 1/8" 4 mm End Cap Facing Away From Screw Thread
F = Flanged Double Bearing Support NOTE: Both Ends must be specified.
TM-02 0.275 0.315 0.04 0.157 0.050 0.375 3/16"-1/4" 5 mm-6 mm Flange Facing Screw Thread Omit this code if ordering nut only.
TM-03 0.438 0.500 0.06 0.188 0.100 0.638 5/16"-3/8" 8 mm-10 mm
TM-04 0.563 0.625 0.08 0.225 0.150 0.863 7/16"-1/2" 12 mm SECOND END CONFIGURATION
Refer to the First End Configuration.
* Refer to reference number system for order codes. Both Ends must be specified.
NOTE: Omit this code if ordering nut only.

OVERALL LENGTH (OAL)


Length in inches, 2 place decimal. Omit this code if ordering nut only.

MODIFIER LIST
T = PTFE Coating (Optional)
S or M Required
S = Standard. no additional description required
M = Modified, additional description required

ONLINE

HELIX
NOOK PRECISION
QUALITY LEAD SCREWS helixlinear.com
The specifications and data in this publication are believed to be accurate and reliable. However, it is the responsibility of the product user to determine the suitability of
Helix products for a specific application. While defective products will be replaced without charge if promptly returned, no liability is assumed beyond such replacement.

Das könnte Ihnen auch gefallen