Beruflich Dokumente
Kultur Dokumente
INSTANT
JULY 2017
CONCRETE
SANDS
MORTARS
MAKING IT EASY
WERE HERE TO MAKE LIFE EASY.
QUICK GUIDE 4
CONCRETES
HandiCrete 5
High Strength HandiCrete 6
CivilCrete 7
RapidSet 8 DRICON FIRST INTRODUCED PREMIXED BAGGED
High Strength RapidSet 9 CONCRETE BECAUSE WE SAW HOW MUCH TIME AND
EFFORT IT TOOK TRADIES TO BUY, MIX AND PLACE THE
CivilSet 10 STUFF BACK THEN. IT WAS AN INSTANT HIT.
MORTARS Since those good old days, our product range has taken off,
MortarPlaster 11 and so have many of your businesses, which means now youre
SuperSet 12 looking for even easier ways to make jobs run smoothly - so
you can get on with making stuff, like money.
CivilPlast 13
Trade Mortar 14 EASY INFO BAG FRONTS
Take a look at our new bag fronts, weve applied our make it
Brick Mortar 15
easy mantra to them too. Youll notice weve made the MPa
Coloured Mortar 16 rating big and bold so you can spot the one you need at your
Architectural Mortar 17 merchant quickly. Weve also brought the work time and
set time info to the front too, so when youre comparing one
Trade Mortar Xtra 18 Dricon product against another you dont have to flip it over to
see the important info.
PAVING JOINT SANDS ABBREVIATED
PRODUCT
PaveSand 19 EASY ONLINE HELP LETTERS
PaveLock 20 Another way were helping ease your workload is with our
new Dricon App. Theres no more running around asking
someone which Dricon product is best for the job, now you
SEALERS
can run through all our products on your mobile. The Dricon
Concrete Treatment 21 App quickly helps identify which bag is fit for purpose - from
Moisture Repellent 22 commercial and civil works to small home builds or quick fixes.
Figuring out how much you need is made simple with a built in
Semi Gloss Sealer 23 quantity calculator.
WORK TIME,
SET TIME
GUIDE
This Quick Guide provides the best product option for
various given applications. In some instances more
than one product may be suitable. If in doubt or you
have an application that is not listed, please call
0800 DRICON
HANDICRETE
High Strength HandiCrete
MortarPlaster
Trade Mortar
Brick Mortar
Culvert Bags
HandiCrete
PaveSandTM
SuperSetTM
CivilCrete
RapidSetTM
PaveLock
Tank Plast
Shotcrete
CivilPlast
Civil Set
Oxitone
Paths
Structural Applications
Letterbox Bases
Retaining Walls
Washing Lines
Bricks BENEFITS
Recycled Bricks > Convenient - all the ingredients in one bag > Can be coloured with Oxitone oxides. Refer to page 25 for
more information
Blocks
> Easy to plan how much to buy
> HandiCrete is formulated to reach a target strength of 20MPa after
> Gives you a super smooth finish every time
Block Fill 28 days (under standard curing conditions)
> No mess - no leftover sand, cement and stones to clear away
Stone
> What you dont use stays in the bag
Plaster
Roughcast
General Grouting
Paving Joints
YIELD
Colouring Concrete 1 X 25KG BAG MAKES
Colouring Mortars & Plasters
0.012m3
Architectural Masonry OF CONCRETE
Water Tank Manufacture
1 X 40KG BAG MAKES
Precast Repair
Roof Tiling
0.019m3
OF CONCRETE
Stabilisation For a slab 600mm x 600mm x 100mm
= 3 x 25kg bag
4 5 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
HIGH STRENGTH
HANDICRETE CIVILCRETE
USAGE: HEAVY DUTY PATHS, KERBING USAGE: CIVIL REMEDIAL WORK, QUICK REPAIRS
BAG SIZE: STRENGTH: WORK TIME: SET TIME: BAG SIZE: STRENGTH: WORK TIME: SET TIME:
BENEFITS BENEFITS
> Convenient - all the ingredients in one bag > Fast finishing general purpose concrete (workable for 15 minutes / sets in 45 minutes)
> Easy to plan how much to buy > Convenient all the ingredients in one bag
> Gives you a super smooth finish every time > Easy to plan how much to buy
> No mess - no leftover sand, cement and stones to clear away > Gives you a super smooth finish every time
> What you dont use stays in the bag > No mess no leftover sand, cement and stones to clear away
> Can be coloured with Oxitone oxides. Refer to page 25 for more information
> What you dont use stays in the bag
> High Strength HandiCrete is formulated to reach a target strength of 20MPa after 3 days and 40MPa after 28 days
> Can be coloured with Oxitone oxides. Refer to page 25 for more information
(under standard curing conditions)
> CivilCrete is formulated to reach a target strength of 20MPa after 3 days and 30MPa after 28 days
(under standard curing conditions)
YIELD YIELD
1 X 25KG BAG MAKES 1 X 25KG BAG MAKES
0.012m3 0.012m3
OF CONCRETE OF CONCRETE
For a slab 600mm x 600mm x 100mm For a slab 600mm x 600mm x 100mm
= 3 x 25kg bag = 3 x 25kg bag
When using for post holes, refer to yield chart on page 8
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
6 7 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
HIGH STRENGTH
RAPIDSET RAPIDSET
TM TM
BAG SIZE: STRENGTH: SET TIME: BAG SIZE: STRENGTH: SET TIME:
BENEFITS BENEFITS
> No bracing just hold the post in position for a few minutes and RapidSet will go to work TM
> No bracing just hold the post in position for a few minutes and High Strength RapidSetTM will go to work
> RapidSetTM will set in 15 minutes > High Strength RapidSetTM will set in 15 minutes
> After one hour it will have gained significant strength to enable you to carry on working (e.g fixing rails), > After one hour it will have gained significant strength to enable you to carry on working (e.g fixing rails),
as long as the area is not exposed to rigorous use as long as the area is not exposed to rigorous use
> RapidSetTM saves you time and effort > High Strength RapidSetTM saves you time and effort
> No mixing just pour water into the hole and slowly pour RapidSetTM straight into hole > No mixing just pour water into the hole and slowly pour High Strength RapidSetTM straight into hole
> No mess no leftover sand, cement and stones to clear away. What you dont use stays in the bag > No mess no leftover sand, cement and stones to clear away. What you dont use stays in the bag
> Long term concrete expansion is minimised through use of advanced fast set technology > Long term concrete expansion is minimised through use of advanced fast set technology
> RapidSet is formulated to reach a target strength of 20MPa after 28 days (under standard curing conditions) > High Strength RapidSetTM is formulated to reach a target strength of 20MPa after 3 days and 30MPa after 28 days
(under standard curing conditions)
Height of post Length of post below Bags Height of post Length of post below Bags
YIELD above ground ground/depth of hole per hole YIELD above ground ground/depth of hole per hole
feet metres feet metres 25kg feet metres feet metres 25kg
1 X 25KG BAG MAKES 1 X 20KG BAG MAKES
8 2.4 2ft 7 0.8 2.4 8 2.4 2ft 7 0.8 3
0.012m3
7
6
2.1
1.8
2ft 4
2ft
0.7
0.6
2.1
1.7
0.01m3
7
6
2.1
1.8
2ft 4
2ft
0.7
0.6
2.5
2.1
OF CONCRETE 5 1.5 1ft 7 0.5 1.4 OF CONCRETE 5 1.5 1ft 7 0.5 1.8
4 1.2 1ft 4 0.4 1.1 4 1.2 1ft 4 0.4 1.3
Use the table or calculate the Use the table or calculate the amount
3 0.9 1ft 0.3 0.7 3 0.9 1ft 0.3 0.8
amount of RapidSetTM needed for of High Strength RapidSetTM needed
your hole based on: Table based on a nominal 100mm x 75mm post: 250mm hole diameter. Bags per hole are based on allowing for 100mm for your hole based on: Table based on a nominal 100mm x 75mm post: 250mm hole diameter. Bags per hole are based on allowing for 100mm
of topsoil over the concrete. This table is to be used as a guide only. of topsoil over the concrete. This table is to be used as a guide only.
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
8 9 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
MORTAR
CIVILSET PLASTER
BAG SIZE: STRENGTH: WORK TIME: SET TIME: BAG SIZE: STRENGTH: WORK TIME: SET TIME:
BENEFITS BENEFITS
> MortarPlaster saves time and effort
> Premixable > POST HOLE APPLICATIONS: No mixing just pour water in to
the hole and slowly pour CivilSet straight into hole > Contains a dry plasticiser accepted and endorsed by key trade users
> Ideal for fence posts placed into porous soils
> CIVIL / PREMIXING APPLICATIONS: CivilSet can be very > Convenient all the ingredients in one bag. Easy to plan how much to buy
> No bracing just hold the post in position for a few minutes
quickly mixed in a wheelbarrow immediately prior to use
and CivilSet will go to work > MortarPlaster is easily workable to achieve a variety of plaster finishes
> No mess no leftover sand, cement and stones to clear away.
> CivilSet will set in 15 minutes > No mess no leftover sand or cement to clear away
What you dont use stays in the bag
> After one hour it will have gained significant strength to > What you dont use stays in the bag
> Long term concrete expansion is minimised through use of
enable you to carry on working (e.g. fixing rails), as long as
advanced fast set technology > Can be coloured with Oxitone oxides. Refer to page 25 for more information
the area is not exposed to rigorous use
> CivilSet is formulated to reach a target strength of 20MPa > MortarPlaster is formulated to reach a target strength of 15MPa after 28 days (under standard curing conditions)
> CivilSet saves you time and effort
after 3 days and 30MPa after 28 days (under standard curing
conditions)
YIELD
Height of post Length of post below Bags
YIELD above ground ground/depth of hole per hole PLASTER BRICK/BLOCKLAYING
feet metres feet metres 25kg
1 X 25KG BAG MAKES 8 2.4 2ft 7 0.8 2.4 Use the table to calculate Plaster with a Concrete Bricks Blocks 20 Series
0.012m 3
7
6
2.1
1.8
2ft 4
2ft
0.7
0.6
2.1
1.7
the amount of MortarPlaster
needed.
per 25kg
10mm cover
1.2m2
230 x 90 x 76mm
24-28
390 x 190 x 190mm
16-19
OF CONCRETE 5 1.5 1ft 7 0.5 1.4 When used as a mortar,
4 1.2 1ft 4 0.4 1.1 MortarPlaster should be placed
Use the table or calculate the This table is to be used as a guide only.
3 0.9 1ft 0.3 0.7 at between 10-15mm per layer.
amount of CivilSet needed for
your hole based on: Table based on a nominal 100mm x 75mm post: 250mm hole diameter. Bags per hole are based on allowing for
100mm of topsoil over the concrete. This table is to be used as a guide only.
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
10 11 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
SUPERSET CIVILPLAST
TM
COMES IN: STRENGTH: WORK TIME: SET TIME: BAG SIZE: STRENGTH: WORK TIME: SET TIME:
6KG PAIL
20KG PAIL 60MPa 3-4 10-15 25KG 30MPa 15 45
25KG BAG IN 28 DAYS MINS MINUTES IN 28 DAYS MINS MINS
BENEFITS BENEFITS
> Minimises operational disruption > Fast finishing general purpose plaster that saves time and effort (workable for 15 minutes / sets in 45 minutes)
> SuperSet will set in 10-15 minutes > Contains a dry plasticiser accepted and endorsed by key trade users
> High strength
> Convenient all the ingredients in one bag
> Can be used for a wide range of tasks
> CivilPlastTM is easily workable to achieve a variety of plaster finishes
> Convenient range of packaging sizes available: 6kg & 20kg pail and 25kg bag
> No mess no leftover sand or cement to clear away
> Pail packaging is suitable for storage and handling in work vehicles
> What you dont use stays in the bag
> Can be coloured with Oxitone oxides. Refer to page 25 for more information
> Airtight re-sealable pail lids mean you only use as much as you need for small repair jobs > Can be coloured with Oxitone oxides. Refer to page 25 for more information
> SuperSetTM is quick setting, and is formulated to reach a target strength of 12MPa after 2 hours, and 60+MPa after 28 days (under standard > CivilPlastTM is formulated to reach a target strength of 20MPa after 3 days and 30MPa after 28 days
curing conditions). See test data below (under standard curing conditions)
25KG This table is to be used as a guide only. When used as a bedding mortar, 1 x 25kg bag makes 1.2m3 plaster
0.012m3 SuperSetTM should be placed at between 10-15mm per layer. at 10mm thick
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
12 13 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
TRADE BRICK
MORTAR MORTAR
FOR MASONRY BRICK & STONE FOR BRICK & STONE
BAG SIZE: STRENGTH: WORK TIME: SET TIME: BAG SIZE: STRENGTH: WORK TIME: SET TIME:
> Refer to Architectural Mortar (page 17) for water resistant formulations > Refer to Coloured Architectural Masonry Trade Mortar (page 17) for water resistant formulations
> Trade Mortar is formulated to meet NZS4210:2001 Masonry Construction: Materials and > Brick Mortar is formulated to meet NZS 4210:2001 Masonry Construction: Materials and Workmanship of 12.5MPa
Workmanship of 12.5MPa after 28 days (under standard curing conditions) after 28 days (under standard curing conditions)
YIELD NUMBER OF BRICKS/BLOCKS LAID PER BAG YIELD NUMBER OF BRICKS/BLOCKS LAID PER BAG
Clay Bricks Clay Bricks Clay Bricks Clay Bricks Clay Bricks Clay Bricks
1 X 30KG BAG MAKES 1 X 30KG BAG MAKES
230 x 76 x 70mm 230 x 119 x 70mm 290 x 162 x 70mm 230 x 76 x 70mm 230 x 119 x 70mm 290 x 162 x 70mm
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
14 15 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD JUST ADD
WATER WATER
COLOURED ARCHITECTURAL
MORTAR MORTAR
MASONRY, BRICK & STONE
FOR MASONRY, BRICK & STONE
USAGE: FOR BRICK & BLOCKLAYING USAGE: FOR BRICK & BLOCK LAYING
BAG SIZE: STRENGTH: WORK TIME: SET TIME: BAG SIZE: STRENGTH: WORK TIME: SET TIME:
> Provides consistency of colour throughout the job > Refer to Architectural Mortar (page 17) for water > Colours available: Stone, Slate and Onyx. Customised colours available on request
resistant formulations
> Minimises waste > Contains a water resistant additive
> Coloured Mortar is formulated to meet NZS > Minimises waste
> Has consistent material calculations from bag to bag
4210:2001 Masonry Construction: Materials and
> Contains a dry plasticiser accepted and endorsed by key Workmanship of 12.5MPa after 28 days (under > Has consistent material calculations from bag to bag
trade users standard curing conditions) > Contains a dry plasticiser accepted and endorsed by key trade users
> Architectural Mortar is formulated to meet NZS4210:2001 Masonry Construction: Materials and Workmanship of
YIELD NUMBER OF BRICKS/BLOCKS LAID PER BAG 12.5MPa after 28 days (under standard curing conditions)
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
16 17 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
JUST ADD
WATER
TRADE
MORTAR XTRA PAVESAND
TM
0.014m
Paver recommended gap width 2-4mm
3
42-48 33-38 40-46 Holland 50 Holland 80 Walkway 50 Forum Piazza Boulevard Flagstone
OF MORTAR Per 20kg 6m2 3.75m2 9.4m2 18m2 12m2 13.5m2 20.2m2
oncrete Bricks Blocks 20 Series
C Devonstone Manorstone
230 x 90 x 76mm 390 x 190 x 190mm 290 x 160 x 70mm 390 x 190 x 90mm Per 40kg 12m2 7.5m2 18.8m2 36m2 24m2 27m2 40.4m2
Use the table provided to calculate the
amount of Trade Mortar Xtra needed. 33-38 21-26 41-46 18-24
This table is to be used as a guide only.
When used as a bedding mortar, Trade Mortar Xtra should be placed at between 10-15mm per layer.
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
18 19 Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
CONCRETE
PAVELOCK
TREATMENT
EFFLORESCENCE REMOVAL
PAVE BONDING SAND & GENERAL CONCRETE CLEANER
BENEFITS BENEFITS
> Non aggressive to skin & metals
> Provides locked in strength and durability for paved surfaces > Water soluble for easy, residue free rinsing
> 150x less corrosive to steel and 500x less corrosive to aluminium
> Is resistant to weed growth and insect infestation making it a maintenance free alternative to standard PaveSandTM > No acid fumes - can be used indoors and outdoors without special
compared to 20% hydrochloric acid
breathing equipment
> Easy to use - please follow instructions on rear of pack
> On-demand technology - Dricon CT only becomes active when
> No corrosion or rusting of most metals in surrounding environment
> Requires minimum maintenance after installation exposed to the target surface (concrete) unlike normal acids that
release all their available activity immediately and indiscriminately
> Effective long-term bonding of joints in areas of high wind and steep gradients
> Kiln dried and screened sand blended with bonding additive HOW TO USE
1 2 3
For light and medium applications wet Contact time depends on Remove Dricon Concrete
the substrate before applying. For heavily application but usually less Treatment with water
contaminated applications/concrete build-up than 10 minutes. before surface dries
substrate should be dry when applying. Apply broom off excess ponding.
using spray bottle, brush, flood or plastic
watering can.
YIELD This table is to be used as a guide only as the area covered per bag depends on the face size of the paver & the
number of joints per square metre.
Note: All mortars and concrete products may exhibit a temporary whitening otherwise known as efflorescence which neither affects strength nor durability.
20 21
MOISTURE SEMI GLOSS
REPELLENT SEALER
USAGE: NEW & EXISTING CONCRETE, USAGE: NEW & EXISTING CONCRETE,
CONCRETE PAVERS, MASONRY PRODUCTS, CONCRETE PAVERS, MASONRY PRODUCTS,
POLISHED CONCRETE, PRE-CAST POLISHED CONCRETE, PRE-CAST
BENEFITS BENEFITS
> Reduces water intake > Densifies concrete > Will enhance the colour of your concrete or masonry surface > Slow drying
> Makes cleaning easier and quicker > Allows concrete and masonry products to breathe > Low-odour turps base > Allows concrete and masonry products to breathe
> Minimises efflorescence > Suitable for vertical and horizontal surfaces > Easy to apply (brush, broom, roller, spray pack, spray gun) > Minimal effect on slip resistance (test results available)
> Non-staining > Internal & external use > Internal and external use
> Easy to apply (spray pack, spray gun) > Inhibits mould & mildew growth
HOW TO USE
HOW TO USE
1 2
Clean the surface to be treated Clean the area with Dricon Concrete Treatment to prepare the
with an appropriate product to surface for sealing, rinse thoroughly and let the area dry completely.
1 2 3 4
Clean the surface Apply Moisture Repellent Clean all equipment remove moss & algae growth if If also using Moisture Repellent, do so now as per Moisture Repellent
Clean the area with
to be treated with in two flood coats by with Turpentine. required. instructions before applying Semi Gloss Sealer.
Dricon Concrete
3 4 5
an appropriate Treatment to prepare the low pressure spray and
product to remove surface for sealing, rinse without thinning. (Allow Apply Semi Gloss Sealer with First coat will normally dry within Clean all equipment
moss & algae thoroughly and let the a minimum of 2 hours either a brush, broom, roller, 1-2 hours. Once the first coat is with Turpentine.
growth if required. area dry completely. between coats.) spray pack or spray gun. dry apply a second.
YIELD YIELD
1 LITRE PER 1 LITRE PER
3-5M2 4-6M2
PER COAT PER COAT
DEPENDING ON DEPENDING ON
CONCRETE DENSITY PLEASE NOTE: Moisture Repellent is not compliant with CCANZ CP01:2014 CONCRETE DENSITY PLEASE NOTE: Semi Gloss Sealer is not compliant with CCANZ CP01:2014
Code of Practice for weathertight concrete and concrete masonry construction Code of Practice for weathertight concrete and concrete masonry construction
22 23
WHITE
PORTLAND
CEMENT OXITONE
VARIOUS SIZES
> Cleaner brighter colours are achieved when using with oxides
> Consistent quality to meet the requirements of architects, engineers and builders SYNTHETIC IRON OXIDE COLOURS ARE FOR USE IN CEMENT BASED
> White Portland Cement is fine in texture (ACTUAL WEIGHTS FOR CONTAINER PRODUCT PRODUCTS - CONCRETE, MORTAR AND PLASTER MIXES.
WILL VARY BY COLOUR DUE TO DIFFERENCES
> Can be coloured with Oxitone oxides. Refer to page 25 for more information IN PRODUCT DENSITIES.)
The colour table below represents indicative colours obtained at 4% Oxitone to cement weight. The colours illustrated are intended as
a guide only and do not represent the colour of the final mixed product. For example the use of white oxides in products containing grey
HANDIPATCH
cement will not produce a white coloured finished product. White oxide will only work effectively in products containing white cement.
We recommend Dricon White Portland Cement.
ASPHALT PAVEMENT REPAIR BLACK DARK RED WHITE Please note: these colours are intended as a guide only.
Weve taken every possible care to ensure accurate
LIGHT BROWN MARIGOLD YELLOW reproduction of the true colours as far as the printing
process will allow. Colours in the Oxitone range are
HandiPatch is a permanent cold patch asphalt repair, for fixing obtained at 4% Oxitone to cement weight.
DARK BROWN
holes in asphalt driveways, concrete driveways, playgrounds etc.
HandiPatch is as easy as sweep, fill and compact.
BENEFITS
YIELD > Manufactured to exacting standards
> Meets or exceeds standards for the use of colour for concrete, mortars and plaster applications
20KG > Colour resistant and colour stable
0.012m 3
> Can be used with High Strength HandiCrete, CivilCrete, CivilPlast, SuperSet, MortarPlaster, Trade Mortar, Trade Mortar Xtra, Brick Mortar
> Wont contribute to efflorescence
BENEFITS
HandiCrete 25kg
HandiCrete 40kg
150-170gm
240-270gm
> Quick and easy asphalt repairs YIELD
MortarPlaster 25kg
Trade Mortar 30kg
320-340gm
350-370gm
> Re-sealable and re-usable container
White or Grey Cement 20kg 700-900gm
White or Grey Cement 40kg 1500-1700gm
24 25
BULK BAGS BAGGED WET MIXES
Dricons range of blended wet mixes are suitable for the tradesperson or home improver that prefers to add their own
FOR ALL BUILDERS MIX, SANDS, cement and admixtures. Available in 25kg bags, 250kg and 500kg bulk bags.
SCORIA & METALS
BENEFITS:
> Easy to use and transport - no spillage BUILDERS MIX
> No waste as the bags tie at the top A blend of 14mm chip and No. 1 river sand which contains the absolute minimum of
> Bags have straps for fork lift handling salts. Builders Mix is ideal for mixing with cement for small concreting jobs around
> Bags have release strings for ease of emptying the home. Also available in a dried version.
Bag Size Builders Mix Builders Sand Plaster Sand East Coast Sand Filtration Sand
250kg 0.16m3 0.18m3 0.18m3 0.16m3 0.17m3
500kg 0.32m3 0.36m3 0.36m3 0.32m3 0.34m3
BUILDERS SAND
Bulk bags come in a 250kg or 500kg bag (other products and bag sizes available upon request). Builders Sand is a general purpose No.1 river sand which contains the absolute
minimum of salts. It is ideal for use as a concrete sand, for basic mortars, childrens
sand pits and as a paving stone sub base. In general it has a top particle size of
1.18mm and a bottom particle size of 0.15mm with an average size of 0.4mm.
CULVERT BAGS
PLASTER SAND
USAGE: CULVERTS, NON-STRUCTURAL RETAINING Plaster Sand is a blend of No.1 river sand and a scientifically graded fine sand which
WALLS, GENERAL REMEDIATION, EROSION CONTROL, contains the absolute minimum of salts. It is formulated specifically for plaster and
BRIDGE ABUTMENTS, GABIONS, TRACK STABILISATION mortar mixes. In general it has a top particle size of 1.18mm and a bottom particle
size of 0.15mm with an average size of 0.3mm.
& FARM SUPPORT
BENEFITS:
> Minimises waste
> Easy to use and transport
> Has a consistent material calculation from bag to bag
> 25kg bag size for ease of handling
Culvert Stabilisation
EAST COAST SAND
> Specialised bag construction for rapid breakdown East Coast Sand is an east coast dune sand and is often referred to as Bricklayers Sand.
It contains the absolute minimum of salts. It is ideal for mortar mixes. In general it has a top
> Design drawings available upon request
particle size of 0.6mm and a bottom particle size of 0.075mm with an average size of 0.3mm.
YIELD TBC
1 METRE2
26 27
OTHER TIPS
PRODUCTS
POST HOLES: REPAIRS:
When using Dricon products for post holes, please ensure you follow all Wet concrete does not generally adhere well to existing hardened
instructions carefully. Some products (e.g. RapidSet and High Strength concrete. It is advisable to:
RapidSet) are not designed to be pre-mixed and must be poured dry in to the
1. Cut out and totally remove all the concrete from the affected section, and
water in the hole as per the instructions on the bag.
re-concrete using HandiCrete, High Strength HandiCrete or CivilCrete.
RapidSet and High Strength RapidSet are the best products for standard
2. Remove the loose concrete as much as possible and replace with fresh
fence post applications, however if any premixing is required (e.g. if you have
concrete using a bonding agent to adhere the two surfaces.
porous soils and still want a fast setting mix but dont want to wait hours for a
general purpose concrete to dry) then the premixable Dricon CivilSet should
be used. Porous soils such as sandy loams will often see the water drain away
DRAINAGE & LANDSCAPING PRODUCTS COMMERCIAL DRIED SANDS
FOUNDATIONS:
before you can pour a bag of post hole mix in to the hole. To assist with product
selection use the Dricon Select App.
DRICON HAS A RANGE OF BAGGED DRAINAGE AND LANDSCAPING DRICON HAS A LARGE RANGE OF BAGGED For a grass finish fill the hole leaving a 100mm gap at the top. After all the Foundations for projects such as brick barbeques, low garden walls and
PRODUCTS AVAILABLE. THIS RANGE HAS NOT BEEN KILN DRIED. COMMERCIAL DRIED SANDS, PEBBLES AND posts are in place you can backfill this gap with soil then sow grass seed. garden sheds should in general be 75-100mm thick.
BELOW IS A LIST OF THE STANDARD RANGE HOWEVER OTHER AGGREGATES AVAILABLE. BELOW IS A LIST OF THE Construction of load bearing structures such as boundary walls, retaining
PRODUCTS ARE AVAILABLE UPON REQUEST. THEY ARE AVAILABLE STANDARD RANGE HOWEVER OTHER PRODUCTS ARE walls and structural walls usually require foundations subject to engineering
IN 25KG BAGS AND 250KG, 500KG AND 1 TONNE BULK BAGS. AVAILABLE UPON REQUEST. THEY ARE AVAILABLE IN HOW BIG SHOULD MY POST HOLE BE AND
considerations and council approval. Phone Dricon for advice or consult a
25KG BAGS AND 250KG, 500KG AND 1 TONNE BULK HOW MUCH MIX SHOULD I USE? building professional.
SAP7 BAGS. CONTACT 0800 DRICON TO DISCUSS YOUR
SAP7 is a fine grade of scoria suitable for infill, drainage and landscaping SPECIFIC REQUIREMENTS. of your posts length needs to be installed below ground. e.g. a 2400mm
purposes. Size range is less than 7mm. post should have 600mm in the ground.
PLAYGROUND SAND
Playground sand is certified to meet NZ 5828:2004 (BSEN
The number of bags needed per hole will vary depending on the holes depth.
The bag instructions have an ideal guide on how many bags to use per hole
PATHS:
1177:1988 Impact Absorbing Playground Surfacing - Safety or alternatively, the Dricon Select App has a quantity calculator to assist with Be generous with path width in order to accommodate current and any
requirements and test methods). It is designed for use quantifying. possible future use. Major paths should be not less than 1250mm wide.
in playground areas. In general it has a top particle size For secondary paths 600-800mm wide is often sufficient. It is advisable to do
Using a lesser amount of post hole mix per hole or a watered down mix
of 2.36mm and a bottom particle size of .15mm with an a mock up by marking out the proposed path width to ensure it will suffice.
may result in a weaker than desired structure. A solid base will help provide
COMMERCIAL PRE MIXES average size of .45mm. It has been laboratory tested
enough strength for the fence to withstand high winds and people climbing
Make sure you have enough room for boxing and pegs.
as sterile. Your path should be 75mm thick and if the path is used by pedestrians only,
DRICON HAS A RANGE OF COMMERCIAL PRE MIX BAGGED PRODUCTS over it. Using the correct amount of post hole mix is a good insurance against
later potential costly fence repairs due to a weak foundation. no reinforcement is necessary.
AVAILABLE. BELOW IS A LIST OF THE STANDARD RANGE HOWEVER TENNIS SAND
OTHER PRODUCTS ARE AVAILABLE UPON REQUEST. CONTACT 0800 Tennis Sand is a river sand that is designed for use in For the average domestic fence using 2400mm posts (with 1800mm above If your path will be subject to vehicle traffic, a minimum depth of 100mm
DRICON TO DISCUSS YOUR SPECIFIC REQUIREMENTS. artificial turf areas. In general it has a top particle size of ground and 600mm below ground) approx. 1 bags of RapidSet 25kg would thick should be used in conjunction with reinforcement. In some instances
2.36mm and a bottom particle size of 0.15mm with an be required per hole. heavy duty paths should be constructed with High Strength HandiCrete
50/50 REPAIR MORTAR average size of 0.6mm. or CivilCrete.
Post holes should be at least 250mm in diameter or width. For posts 100mm
50/50 Repair Mortar is a blend of fine white sand and grey and white To ensure proper drainage your path should be 25mm above ground level
x 100mm and larger, aim for 100mm gap between the post and the side of the
cement. It is ideal for repair work on pre-cast concrete panels and tanks. BOWLING SAND and if next to a building, should slope away.
hole. As a general guide the hole should be three times the width of the post.
Available in 25kg bags. Also commonly referred to as Castle Sand Bowling Sand is
Dig your hole a little deeper than required and add stones to the bottom of the For radius curves, run a series of saw-cuts nearly through the wood on the
a river sand that is designed for use in artificial turf areas.
ROOFING BEDDING MORTAR hole first, to bring the post up to the desired height. This is easier than cutting inside of the curve to enable you to bend the wood without breaking it.
In general it has a top particle size of 1mm and a bottom
Roofing Bedding Mortar is a mortar product for the fixing of concrete and particle size of .15mm with an average size of .4mm. the posts to the right height after the posts are in the ground. Use control joints to control cracking due to shrinkage.
clay roof tiles. It is a base product that is factory tuned to meet individual A neat control joint can be achieved by running a thin piece of timber through
specific customer requirements. Available in 25kg bags. IRON SAND (BLASTING SAND) the concrete to make a groove half the depth of the slab. Do this once while
Iron Sand is a product used for abrasive blasting. In general the concrete is fresh, and repeat when it has hardened a little, to finish and
SHOTCRETE
Shotcrete is used in shotcrete spray pump machines otherwise know as
it has a top particle size of 0.6mm and a bottom particle size
of 0.75mm with an average size of 0.2mm.
MORTAR AND PLASTER WORK: set the groove.
gunite machines. It is primarily used for earth stabilisation purposes. It is Only mix as much mortar as you can use up in one hour. Unused mortar that
available in 25kg and 40kg bags and 250kg, 500kg and 1 tonne bulk bags. NO. 1 SAND has started to stiffen must be disposed of and not softened by mixing more
MOWING STRIPS
No. 1 Sand is a river sand suitable for a range of uses water. Adding additional water will weaken the mix.
TANK PLAST including concretes, mortars, grouts, plasters and paint. In For plastering and for clay bricks it is advisable to moisten the surface so that
Tank Plast is a plaster product used for the manufacture of water tanks. It
is available in 25kg and 40kg bags and 250kg, 500kg and 1 tonne bulk bags.
general it has a top particle size of 2.36mm and a bottom
particle size of 0.15mm with an average size of 0.45mm.
the clay bricks or plaster surface does not absorb too much water from the
fresh plaster or mortar. Excess water absorbed from the plaster or mortar
AND GARDEN EDGES:
may cause the plaster or mortar to lose strength. An ideal width for the edge is 150mm, therefore dig a trench 250mm to
BLOCKFILL FOUNDRY SAND accommodate the boxing and pegs.
20MPa Blockfill is a blend of a 5mm aggregate, sand and cement used for Masonry blocks and bricks should be laid dry.
Foundry Sand is a white sand suitable for foundry moulding,
A depth of 75mm will be sufficient.
filling the cores in masonry block work. Available in 25kg bags. stone mason work and as a raw material for fine plastering, All Dricon products used for plaster work (e.g. plastering over a concrete
grouting and paints. In general it has a top particle size deck or steps) should be applied at a minimum 10-12mm thickness per coat. Use spacing joints to control cracking from shrinkage.
of 0.6mm and a bottom particle size of 0.15mm with an Further coats can be added, again at a thickness of 10-12mm. Try to keep mowing strips level to the lawn, this will protect your garden and
average size of 0.2mm. To repair small non-structural cracks use Dricon MortarPlaster. your lawn mower.
To repair structural cracks use Dricon CivilPlastTM or SuperSet. SuperSet
FILTRATION SAND
does not generally require a bonding agent.
It is generally used in commercial filtration. In general it has
a top particle size of 2.36mm and a bottom particle size of
0.6mm with an average size of 1.18mm.
28 29
HOW TOs JUST ADD WATER
RAPIDSET , HIGH STRENGTH RAPIDSET & CIVILSET E
TRADE MORTAR
ET T
N CR AN
1 2 3
CO NS
T
1 2 3
TM T I
kg DSE LI
FT
2
40 API
P
R E
AT
W
D
AD
ST
JU
Prepare the post hole. In sandy soils Add recommended quantity of water After just a few minutes the mix will Pour 3.8 to 4.2 litres of water into the Mix this for 5 or 6 minutes. It may be The material combination in Dricon
you may have to line the hole with to the hole and pour one bag at a steady have set sufficently to allow you to align mixer then add the Dricon Trade necessary to add small quantities of Trade Mortar is designed to give the
plastic to contain the water or use and even rate around the post into the post to desired position. Mortar mix. water to bring the mix up to its final tradesperson maximum spreadability
Civilset (see page 10). Position water. Take approximately 1 minute Bracing is not necessary, but if desired, desired level of workability. and workability. The sand, cement and
the post in the hole and thoroughly per bag. Do not pour too fast. The idea have bracing ready before adding the plasticiser ratios are tuned for brick and
saturate the walls of the hole and the is to wet the concrete as it falls to the mix. Once post is aligned allow the mix blocklaying purposes. The board life
post, so they do not soak up the water bottom. to harden undisturbed for 15 minutes. under normal weather conditions is on
needed for the concrete. Wait at least one hour before working average 30-35 minutes.
with the post.
1 2 3
Ensure the pavers have had an initial Sweep PaveLock into joints using a Lightly spray with water until the paved
vibrating plate compaction of 2 passes stiff broom. Fill the joints to the top of area is saturated and water is ponding. See page See page See page See page See page
to bed them in to the underlying the pavers and compact for at least 2 Avoid spraying directly into the joints as
bedding sand. Remix the product dry
in a wheelbarrow or clean dry concrete
mixer to ensure that the contents of
passes initially, refill joints and then
complete final compaction. Ensure
pavers are free from residue.
this may dislodge PaveLock.
The surface will be useable after one
good drying day.
14 15 16 17 18
the bag are fully reintegrated. Arrange
PaveLock in 5 or 6 piles for every 1-2
square metres over the dry paved area
to ensure the entire area is covered.
Please note: Please ensure you fully read all instructions on back of PaveLock pack.
30 31
ENVIRONMENTAL CARE
CREATING A SUSTAINABLE ENVIRONMENT
As the leading brand in New Zealands pre-bagged concrete and mortars industry,
Dricon is committed to making a positive contribution to sustainability. Concrete
is a versatile and durable building material comprised of mainly natural ingredients.
Cured Dricon wont rust or rot resulting in a long product life cycle. It has inherent
fire resistance and its extremely robust nature means only minimal maintenance is
needed, saving both energy and resources.
STORAGE
Ensure the bags are in a clean, dry place. If the contents of the bag are not kept dry, then KEEP DRY
Dricon does not guarantee the performance or success of the product.
DANGER
May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause cancer.
Causes serious eye damage. If medical advice is needed have product container or label at
hand. Keep out of reach of children and read label before use. May be harmful if inhaled and
cause respiratory irritation. Causes skin irritation including allergic skin irritations.