Sie sind auf Seite 1von 1

International Wrokshop on Punching Shear Capacity of RC Slab - Stockholm 2000

Session 6 - Design models & issues II


Reineck K-H ', Beutel R 2 & Staller M 3 Design models and test data bank for 261
1
University of Stuttgart, Stuttgart (DE) punching of structural concrete slabs: the
2
University of Technology, Aachen (DE) fib Bulletin on "Punching of structural
3
Technical University of Munich, Munich (DE)
concrete slabs" dedicated to Prof. S.
Kinnunen
Ozawa M, Uchida Y & Koyanagi W Study on the process on punching shear 277
Gifu University, Gifu (JP) failure of RC slabs
Dechka DC, Loov RE & Dilger W Prediction of punching shear capacity by 285
University of Calgary, Calgary (CA) shear friction
Windisch A Towards a consistent design model for 293
DYWIDAG Systems International GmbH, Munich punching shear capacity
(DE)
Albrecht U Design of flat slabs: comparison of shear 303
FH Nordostniedersachsen, Buxtehude (DE) provisions in various codes

Session 7 - Moment transfer &


connections
Ajdukiewicz A* Experimental tests and analytical models 313
Silesian University of Technology, Gliwice (PL) of composite RC slab-column joints
Polak MA ' & El-Salakawy EF 2 Experimental investigation on the 323
1
University of Waterloo, Waterloo (CA) behaviour of RC slab-column edge
2
Minufiya University, Shebin El-Kom (EG) connections with openings
Kruger G, Burdet O & Favre R Punching strength of RC flat slabs with 333
Swiss Federal Institute of Technology, Lausanne moment transfer
(CH)
Afhami S, Alexander S & Simmonds S Shear and moment transfer in a full-scale 343
University of Alberta, Edmonton (CA) two-panel flat plate specimen
Cleland DJ \ Gilberg S \ Murray KA 2 & The punching capacity of RC slabs at 351
Scott RH 3 edge columns
1
Queen's University of Belfast, Belfast (UK)
2
Dundalk Institute of Technology, Dundalk (IE)
3
University of Durham, Durham (UK)
El-Ghandour AW, Pilakoutas K & Punching shear behaviour and design of 359
Waldron P FRP RC flat slabs
University of Sheffield, Sheffield (UK)

Session 8 - Design models & issues III


Staller MA Analytical studies and numerical analysis 367
Technical University of Munich, Munich (DE) of punching shear failure in RC slabs
Sundquist H Punching of bridge slabs with a special 375
Royal Institute of Technology, Stockholm (SE) reference to non-symmetrical moment
distribution, non-eccentric column load

Das könnte Ihnen auch gefallen