Sie sind auf Seite 1von 3

Minutes of Meeting

Meeting of: FIAP172 Group 20 Chairperson: Roemy Janse van


Rensburg
Date: 30 July 2017 Secretary: Harry Nell
Time: 12:00 pm Venue: Amfie Theater

1. Welcome:
1.1. The Chairperson, Roemy Janse van Rensburg opened the meeting with an warm
welcome.

2. Attendance:
2.1. Apology: All members were present at the meeting and therefor there was no
apology.
2.2. Absent without apology: No members were absent as stated in 2.1 above.

3. Personalia:
3.1. The Chairperson gave an opportunity to all members to share their personal highs
and lows with the group.

4. Approval of Minutes:
4.1. The minutes of the previous meeting was approved and all mistakes were reflected
on by the group.

5. Matters arising from previous minutes:


5.1. No matters arose from the previous meeting.

6. Determining of agenda:
6.1. Peer assessment of the essays.
6.2. Rewrite the essay with new knowledge acquired from previous class.
6.3. - Update the "04 Meeting Documents" directory of your group's site as prescribed in the "04
Example Site.
7. Next meeting:
7.1. Next meeting will be held when necessary.

8. Action List Activities:


Edit essay Before end of meeting
Do peer assessment 31 July 2017
9. Determine the date for the next meeting and appoint the next chairperson and
secretary.

The next Chairperson will be Aletta and Muller van Schalkwyk will be her secretary

The next meeting will be confirmed by the chairperson at least 24hours before the meeting
to the members

10. Reflection on this meeting:


10.1. The Chairperson will assess all feedback of members on the meeting and give a point
to each ones performance
There were no points given on where to improve and the first meeting was confirmed a
success by every member
10.2. All members were pleased about the meeting and there were no complaints
by any member and no points of issues were mentioned.

FIAP172 2017 Minutes of Meeting Number 004 30 July 2017


11. Essay

Roughly nine important steps can be followed if you want to successfully construct a brick
wall.

Firstly, choose a location on level ground and decide on the width and length of your brick
wall. Choose the type of brick and be sure to buy enough of it, as well as extra in case some
bricks get damaged. Stick to the standard type of sever weathering brick which is usually
222mm in length, 106mm in width and 73mm in height.

Secondly, gather all the necessary tools and materials. This includes a spade, string, buckets,
steel tape measure, level, blocking chisel, water compass, mashing hammer, brick trowel,
mortar, and some water.

Thirdly, dig out a trench for the foundation according to the necessary dimensions. Dig until
the soil becomes unyielding. Solidify the trench with a layer of concrete that needs to be
levelled. Mark string guidelines for the wall on the concrete strip. Make sure the concrete is
dry before construction is started.

Start laying the first course of bricks on the layer of mortar and level it. The first course of
bricks can now be covered in mortar and another course. Pull a line of string along the first
layer to ensure that the wall is straight. Lay the remainder of the bricks on the bottom layer,
constantly ensuring that the wall is straight in width and height.

Step six and seven. Continue with the course of brick laying as stated previously. Scrape off
as much excess mortar in the process as possible. File down the brick wall to ensure an even
surface.

The final step would be to seal the wall and mortar with waterproof sealer between the layers
of brick. This will ensure that the wall does not erode over time.

This concludes the nine important steps that you will need to follow to successfully construct
a brick wall.

[310 words]

FIAP172 2017 Minutes of Meeting Number 004 30 July 2017

Das könnte Ihnen auch gefallen