Beruflich Dokumente
Kultur Dokumente
INLET (IN)
FC55
CONTROLLED
FLOW (CF)
EXCESS
FLOW (EX)
FCB51-3/4
FCR51-3/4
INLET (IN)
FCR51
CONTROLLED EXCESS
FLOW (CF) FLOW (EX)
INLET
(IN)
FEATURES:
DIAMOND HONED SPOOL BORE provides consistent spool fit with low leakage.
EVERY FC IS TESTED for shutoff, max. flow, and pressure compensation.
STANDARD 3-PORT allows for pressure compensated flow out of two ports.
STANDARD 416 STAINLESS STEEL side lever spool to prevent the spool from locking up.
STANDARD SAE ORB COMPENSATOR PLUGS to eliminate external leakage from the
compensator bore.
EXTERNAL SEALS ON ROTARY SPOOL prevents contamination from locking up spool.
OPTIONAL TOP PORT allows the customer to plumb their pipe directly in line with the inlet.
OPTIONAL 2-PORT allows for pressure compensated flow out of one port.
OPTIONAL 316 STAINLESS STEEL rotary spool provides highest corrosion resistance.
OPTIONAL FREE REVERSE FLOW allows fluid to move from the CF (control flow) and EX
(excess flow) port to the inlet. (Single reverse flow is also available)
OPTIONAL ADJUSTABLE BALL SPRING RELIEF AND HIGH LIFT BALL SPRING RELIEF
CF (control flow) port.
SPECIFICATIONS: MATERIALS:
See flow chart for capacity. Cast Iron Body.
Rated for 3000 psi (207 bar). Heat Treated Compensator Spool.
Weighs 7- lbs. (3.52 kg). Stainless Steel Rotary Spool.
30-Micron Filtration Recommended. Buna N ORings (Standard)
Heat Treated Free Reverse Check Seat.
PORT SIZE:
3/8 3/8 NPT (0-8 gpm standard) 2 OR 3 PORT:
1/2 1/2 NPT (0-16 gpm standard) 2P 2 port
3/4 3/4 NPT (0-30 gpm standard) Omit 3 port (Standard)
6 - #6SAE (9/16 18) (0-8 gpm standard) TP Top ported
8 - #8SAE (3/4 16) (0-8 gpm standard)
10 - #10SAE (7/8 14) (0-16 gpm standard)
12 - #12SAE (1-1/16 12) (0-30 gpm standard)
Page B-2
Flow Control Valves
Controlled Flow vs. Dial Plate for FC Series Pressure Drop vs. Flow for FC Series
32 200
FC51-3/4
Excess Flow
28
24 150
FC51-1/2
16 100
12
FC51-3/8
8 50
0 0
0 1 2 3 4 5 6 7 8 9 10 0 4 8 12 16 20 24 28 32 36 40 44
Dial Plate Number (0-10) Flow (gpm)
Pressure vs. Flow for FCR51 Pressure vs. Flow for FCB51
3500
2500 TS324 Spring
Pressure (psi)
1500 2000
1500
1000
TS323 Spring
1000
500
500
0 0
0 3 6 9 12 15 18 21 24 27 30 0 5 10 15 20 25 30
CF relief is set at 6 gpm Flow (gpm) CF relief is set at 6 gpm Flow (gpm)
Page B-3
Flow Control Valves
DIMENSIONAL DATA:
3.87"
2.28 REF 29/32
11/32 REF
17/64 THRU
6
2.13" .88
D
=O
(2 PLACES)
MA
8
H A , NE
9 10
IN
1.75" 0.145"
2.88"
FCR51 AND FC51 DIMENSIONAL DATA (FCR51 SHOWN):
3.87"
2.28" 29/32 REF.
11/32 REF
(2 PLACES)
6
2.13" .88
D
=O
7
MA
8
H A , NE
9 10
IN
4.56"
Page B-4