Beruflich Dokumente
Kultur Dokumente
(Rates are as per U.P.P.W.D. Schedule Of Rates For Year-2015-16 Applicable For Lucknow
Page 1
5 12mm cement plaster in single coat on fair side of single or half brick
wall for exterior plastering up to floor two level including internal
rounded angles chamfers, and/or rounded angles not exceeding
80mm in girth and finished even and smooth no extra for mixing any 30.25 SQM.
additive. (1)1 cement : 6 fine sand (a) Providing and fixing water
proofing materials in cement mortar for plastering or in concrete work
in the proportion recommended by the manufacturer. (PWD-586+599)
6 6mm thick plaster in 1:3 on ceiling and soffits of stairs upto floor two
75.25 SQM.
level. (PWD-582+587)
7 Providing and laying vitrified tiles flooring of approved make by E/I
flooring over 20 mm thick base of cement mortar 1:4 ( 1cement :
4coarse sand)laid and jointed with white cement (with pigment) slurry
including rubbing and polishing of joints complete. (Size 60x60 cm) 55.25 SQM.
8 Mild steel or iron work of small sizes and sections such as holding
down bolts, hold fast tierods,gratings etc.( when not included in an
over all rates) wrought to required from including supply of steel
and its wastage including cost of bolts, nuts if required for and
185.00 KG.
welding, grinding and making holes as required completion of work
fabrication of holes doors,chaukhats nosing. (PWD 502)
9 Providing & fixing ISI marked flush door shutters conforming IS:
2202 non- decorative type, core of block board construction with
frame of 1st class hard wood and well matched commercial 3 ply
veneering with vertical grains or cross bands and face veneers on 10.50 SQM.
both faces of shutters .
10 Painting two coat over priming coat (but including cost of priming
coat) on steel and other metal surfaces up to 10 cm. width or
girth or small articles not exceeding 0.10sqm in area white superior
synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX
specified brushing to give an even shade and including cleaning
the surface of all dirt,dust and other foreign matter sand papering 54.25 SQM.
and stoping including cost of all materials, labour tools and plants
etc. required for proper completion of the work.
13 Providing & laying one coat of acrylic primer & wall sealer in the
ratio of 1:1 + Repair check with Putty + primer on the repaired
surface+ one coat of Texture ( Duracoat) + Two top coat of Pure
acrylic Emulsion with a unique property of dust pick up 30.25 SQM
resistant ( Ultrasheild- tinted), applied with roller & brush.
Page 2
14 Fabrication, supply and installation of SS 304 grade railing made of
38mm baluster and 38mm top rail of 1.6mm thickness with 3 mid rails
of 12 OD tube connected with CNC machine made. Modular
connectors fixed with dash fastners. Centre distance between each 9.25 RM
baluster 900mm & 950mm high baluster.
15 Add 12.5 % For Internal Electrical Work's (As per UP.PWD Plinth Area Rate. )
16 Add 12% For Internal Water supply & Sewrage (As per UP.PWD P.A Rate. )
SAY RS.
Page 3
Floor
RATE AMOUNT
5330.00 161232.50
7650.00 80325.00
7350.00 3748.50
7850.00 31243.00
8640.00 39052.80
6890.00 137179.59
100.00 16315.00
Page 4
125.00 3781.25
152.00 11438.00
1402.55 77490.89
69.90 12931.50
3580.00 37590.00
75.00 4068.75
128.00 13504.00
85.40 9009.70
460.00 13915.00
Page 5
6400.00 59200.00
Rs. 712025.48
Rs. 89003.18
Rs. 85443.06
Rs. 886471.72
8.86 LAC
Page 6