Beruflich Dokumente
Kultur Dokumente
Sirocco Series
INSTALLATION, OPERATION & MAINTENANCE MANUAL
DISCLAIMER
In complying with Acsons policy for continuous product improvement, the information
contained in this document is subject to change without notice. While ACSON makes
no commitment to update or provide current information automatically to the manual
owner, that information, if applicable, can be obtained by contacting the nearest ACSON
Applied Systems office. It is the responsibility to the equipment in question. If there is
any question in the mind of operating/serice personnel as to the applicability of these
documents, then prior to working on the equipment, they should verify with the owner
whether the equipment has been modified and if current literature is available.
! CAUTION
HIGH VOLTAGE
is used in the operation of this equipment.
DEATH OR SERIOUS INJURY
may result if personnel fail to observe safety precautions.
Shut off the power supply to equipment before beginning work and follow
lockout procedures. When working inside equipment with power off, take
special care to discharge every capacitor likely to hold dangerous potential.
Model: IOM-AVS-1401
LOW VOLTAGE
1
1.0 INSTALLATION AND MAINTENANCE
PEMASANGAN & PENYELENGGARAAN
1.4 ILLUSTRATION OF COMPONENTS (Ilustrasi komponen)
WARNING : WARNING :
Cut off power supply and wait until If the supply cord is damaged, it must
blade has stopped before maintenance. be replaced to avoid a hazard.
AMARAN : AMARAN :
Putuskan bekalan kuasa dan pastikan Jika wayar bekalan rosak, ia mesti
kipas berhenti sebelum membuat digantikan supaya perkara bahaya
penyelenggaraan. tidak berlaku.
2
3.0 UNIT DIMENSION / DIMENSI UNIT
MODEL A
MODEL B
MODEL C
IOM-AVS-1401
While utmost care is taken in ensuring that all details in the publication are correct at the time of going to press,
we are constantly striving for improvement and therefore please confirm with your local distribution office for
the latest update on the product interested. All rights reserved.