Beruflich Dokumente
Kultur Dokumente
1
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
MOTION CONTROL DESIGN
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
3. Which two properties of compressed air make possible smooth acceleration and reversal of direction of
mechanical motions [ ]
A) Easy to store and very fast working medium B) Elastic and very fast working medium
C) Compressible and elastic D) Efficient and compressible
9. In feedback system [ ]
A)Stability Increases B)disturbances increases C)Gain Increases D)sensitivity Increases
10. Which of the following relates the emf. generated in a single homogeneous wire to the temperature
difference ? [ ]
A) Peltier effect B)Thomson effect C) See beck effect D) none of these
Cont..2
Code No:117FQ :2: Set No. 1
11. When _______________ contacts are actuated, they disrupt the power supply through them.
14. In mechatronics system design process the term theoretical modeling is based on ___________.
16. _______________ the maximum expected error associated with a measurement or a sensor.
19. The fluid power devices that convert the energy of a pressurized fluid into mechanical energy to do work
are called ______________.
20. The device which converts one energy into another is called a ______________ .
-oOo-
Code No: 117FQ Set No. 2
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
MOTION CONTROL DESIGN
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
6. In feedback system [ ]
A)Stability Increases B)disturbances increases C)Gain Increases D)sensitivity Increases
7. Which of the following relates the emf. generated in a single homogeneous wire to the temperature
difference ? [ ]
A) Peltier effect B)Thomson effect C) See beck effect D) none of these
10. Which two properties of compressed air make possible smooth acceleration and reversal of direction of
mechanical motions [ ]
A) Easy to store and very fast working medium B) Elastic and very fast working medium
C) Compressible and elastic D) Efficient and compressible
Cont..2
Code No:117FQ :2: Set No. 2
11. In mechatronics system design process the term theoretical modeling is based on ___________.
13. _______________ the maximum expected error associated with a measurement or a sensor.
16. The fluid power devices that convert the energy of a pressurized fluid into mechanical energy to do work
are called ______________.
17. The device which converts one energy into another is called a ______________ .
18. When _______________ contacts are actuated, they disrupt the power supply through them.
-oOo-
Code No: 117FQ Set No. 3
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
MOTION CONTROL DESIGN
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
4. In feedback system [ ]
A)Stability Increases B)disturbances increases C)Gain Increases D)sensitivity Increases
5. Which of the following relates the emf. generated in a single homogeneous wire to the temperature
difference ? [ ]
A) Peltier effect B)Thomson effect C) See beck effect D) none of these
8. Which two properties of compressed air make possible smooth acceleration and reversal of direction of
mechanical motions [ ]
A) Easy to store and very fast working medium B) Elastic and very fast working medium
C) Compressible and elastic D) Efficient and compressible
Cont..2
Code No:117FQ :2: Set No. 3
11. _______________ the maximum expected error associated with a measurement or a sensor.
14. The fluid power devices that convert the energy of a pressurized fluid into mechanical energy to do work
are called ______________.
15. The device which converts one energy into another is called a ______________ .
16. When _______________ contacts are actuated, they disrupt the power supply through them.
19. In mechatronics system design process the term theoretical modeling is based on ___________.
-oOo-
Code No: 117FQ Set No. 4
JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
IV B .Tech. I Sem., I Mid-Term Examinations, September - 2017
MOTION CONTROL DESIGN
Objective Exam
Name: ______________________________ Hall Ticket No. A
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
2. In feedback system [ ]
A)Stability Increases B)disturbances increases C)Gain Increases D)sensitivity Increases
3. Which of the following relates the emf. generated in a single homogeneous wire to the temperature
difference ? [ ]
A) Peltier effect B)Thomson effect C) See beck effect D) none of these
6. Which two properties of compressed air make possible smooth acceleration and reversal of direction of
mechanical motions [ ]
A) Easy to store and very fast working medium B) Elastic and very fast working medium
C) Compressible and elastic D) Efficient and compressible
Cont..2
Code No:117FQ :2: Set No. 4
12. The fluid power devices that convert the energy of a pressurized fluid into mechanical energy to do work
are called ______________.
13. The device which converts one energy into another is called a ______________ .
14. When _______________ contacts are actuated, they disrupt the power supply through them.
17. In mechatronics system design process the term theoretical modeling is based on ___________.
19. _______________ the maximum expected error associated with a measurement or a sensor.
-oOo-