Beruflich Dokumente
Kultur Dokumente
Availability
Stainless SteelAlloy 2205 is stocked by 79 North American distributors and produced by 52 large
mills. Distributors will offer small quantity buys while mills will generally only sell large quantities,
with delivery times anywhere from 10 to 50 weeks depending on size and form required
This material is stocked primarily in Flat Rolled Products by 39 distributors but is also available to a
lesser extent in Bar Products, Tubular Products, Piping Components, Wire Products, and Forging
Products.
Specifications
The following specifications cover Stainless Steel Alloy 2205
Property Results
Related Metals:
Nauticalloy 4462
Marinox 21(tm)
2205(tm)
http://www.suppliersonline.com/propertypages/Alloy2205.asp 1/4
16/9/2017 Alloy 2205 Stainless Steel Material Property Data Sheet - Product availability and request a quote
AF.F51
AL 2205(tm)
Cabvalloy alloy VS-22(tm)
F51
Cabvalloy VS-22(tm)
RA 2205(tm)
Duplex Alloy 2205
Applications Most often employed in welded pipe and tube in chemical tanks,
flue gas filters, acetic acid distillation components and heat
exchangers.
Forming Due to its inherently high strength and work hardening rate,
2205 is difficult to form. It will take a lower radius than 316
stainless and a higher allowance must be made for springback.
Welding TIG, MIG, SMAW and manual covered electrode methods have
been successfully employed. Use caution in the following areas :
1.) Do not preheat the weld piece. 2.) use low heat inputs and
3.) Cool below 300 F between passes.
Hot Working Hot work should be done in the range of 1750-2100 F, although
room temperature forming is recommended whenever possible.
When any hot forming is performed, a full anneal with rapid
quench is required to reattain maximum stability and
properties.
http://www.suppliersonline.com/propertypages/Alloy2205.asp 2/4
16/9/2017 Alloy 2205 Stainless Steel Material Property Data Sheet - Product availability and request a quote
Form Plate
Condition Test Specimen Annealed
Temper 70
Tensile Strength 105
Yield Strength 75
Elongation 35
Rockwell C24
Brinnell 252
Form Sheet
Condition Test Specimen Annealed
Temper 200
Tensile Strength 90
Yield Strength 50
Form Sheet
Condition Test Specimen Annealed
Temper 400
Tensile Strength 80
Yield Strength 45
Form Sheet
Condition Test Specimen Annealed
Temper 600
Tensile Strength 79
Yield Strength 40
Videos :
Disclaimer
This information is provided "as is" and Metal Suppliers Online, Inc. makes no warranty of any kind
with respect to the subject matter or accuracy of the information contained herein. Metal Suppliers
http://www.suppliersonline.com/propertypages/Alloy2205.asp 3/4
16/9/2017 Alloy 2205 Stainless Steel Material Property Data Sheet - Product availability and request a quote
Online, Inc. specifically disclaims all warranties, expressed, implied or otherwise, including without
limitation, all warranties of merchantability and fitness for a particular purpose.
In no event shall Metal Suppliers Online, Inc. be liable for any special, incidental, indirect or
consequential damages of any kind or any damages whatsoever resulting from loss of use, data,
profits, whether or not advised of the possibility of damage, and on any theory of liability, arising out
of or in connection with the use of the information contained herein.
This publication may include technical inaccuracies or typographical errors. Changes may be
periodically made to the information herein.
Use of this Web Site constitutes acceptance of the Metal Suppliers Online User Agreement.
Copyright 1995-2017 Metal Suppliers Online, LLC. All Rights Reserved.
Metal Suppliers Online Privacy Policy |Contact Us
http://www.suppliersonline.com/propertypages/Alloy2205.asp 4/4