Beruflich Dokumente
Kultur Dokumente
IRT-WP12-230
Isolated 9~36V to 12V 100W DC/DC Converter Module
Features
High efficiency DC-DC Converter
Low inrush current
Output over-current protection
Wide range voltage input
No minimum load required
RoHS Compliant
GENERAL
Applicable to general mainboard with 12V DC input
MECHANICAL
Unit: mm
Specifications
Input Voltage : 9V to 36V DC
Load Range : 12V, 8.3A
Ripple And Noise : Less than 120mV
Line Regulation : Less than 1% at rated 9~36V input voltage
Load Regulation : Less than 5%
Efficiency : Up to 90%
Altitude : 0 to 10000ft
Protection : OCP protection
Operating Temp. : 0~50C
Storage Temp. : -20~+70C
Humidity : 10~90% non-condensing
Dimension : 120 x 62 x 23 (mm)
Note: All Specifications are subject to change without prior notice! Revised Date:11/24/2014
DC To DC Power Units
IRT-WP12-230
Isolated 9~36V to 12V 100W DC/DC Converter Module
1
2 J9
3
J5
3 1
4 2 3 1
J6
4 2 2
6 6
J4 1
J7
1 1 J1
Note: this is a simplified drawing and some components are not marked in detail.
* Please contact our sales representative if you need further product information.
Pin Assignment:
Note: All Specifications are subject to change without prior notice! Revised Date:11/24/2014