Beruflich Dokumente
Kultur Dokumente
TDX26 PLUS
PRESET
DELAY PREV NEXT ENTER
TDX26 PLUS
EDIT
MODE A B 1 2 3 4 5 6
UTILITY ESC
Protective Ground Terminal Do not install this product near any direct heat source.
Do not block areas of ventilation. Failure to do so could
AC mains (Alternating Current)
result in fire.
AC mains (Alternating Current) Keep product away from naked flames.
Denotes the product is turned on.
IMPORTANT SAFETY INSTRUCTIONS
Denotes the product is turned off.
Read these instructions
WARNING Follow all instructions
Describes precautions that should be observed to Keep these instructions. Do not discard.
prevent the possibility of death or injury to the user. Heed all warnings.
Only use attachments / accessories specified by the
CAUTION manufacturer.
Describes precautions that should be observed to
Power Cord and Plug
prevent damage to the product.
Do not tamper with the power cord or plug. These are
Disposing of this product should not be placed in designed for your safety.
municipal waste but rather in a separate collection.
Do not remove Ground connections!
If the plug does not fit your AC outlet seek advice
WARNING
from a qualified electrician.
Power Supply
Protect the power cord and plug from any physical
Ensure that the mains source voltage (AC outlet) stress to avoid risk of electric shock.
matches the voltage rating of the product. Failure to
Do not place heavy objects on the power cord. This
do so could result in damage to the product and
could cause electric shock or fire.
possibly the user. Unplug the product before electrical
storms occur and when unused for long periods of time Cleaning
to reduce the risk of electric shock or fire. When required, either blow off dust from the product
or use a dry cloth.
External Connection
Do not use any solvents such as Benzol or Alcohol.
Always use proper ready-made insulated mains
For safety, keep product clean and free from dust.
cabling (power cord). Failure to do so could result in
shock/death or fire. If in doubt, seek advice from a Servicing
registered electrician. Refer all servicing to qualified service personnel only.
Do not perform any servicing other than those instruct
Do Not Remove Any Covers
-ions contained within the User's Manual.
Within the product are areas where high voltages may
present. To reduce the risk of electric shock do not The mains plug or an appliance coupler is used as
remove any covers unless the AC mains power cord is the disconnect device, the disconnect device shall
removed. Covers should be removed by qualified service remain readily operable.
personnel only.
Carts and stands - The
No user serviceable parts inside. component should be used
only with a cart or stand
Fuse that is recommended by
To prevent fire and damage to the product, use only the manufacturer.
the recommended fuse type as indicated in this A component and cart
combination should be
manual. Do not short-circuit the fuse holder. Before moved with care. Quick
replacing the fuse, make sure that the product is OFF stops, excessive force,
and uneven surfaces may
and disconnected from the AC outlet.
cause the component and
cart combination to overturn.
TDX
1.INTRODUCTION ........................................................................................................1
2.FEATURES ..................................................................................................................1
5.REAR PANEL.................................................................................................................5
6.SIGNAL PROCESSING...................................................................................................6
8.SYSTEM CONFIGURATION...........................................................................................8
9.FIRST SETUP................................................................................................................10
15.UTILITY MENU...........................................................................................................34
16.GANGING SUBMENU................................................................................................34
17.CONFIGURATIONS....................................................................................................43
18.CONNECTIONS..........................................................................................................46
20.TECHNICAL SPECIFICATIONS.....................................................................................54
21.GUARANTEE ...........................................................................................................55
22.NOTE ........................................................................................................................56
TDX
Thank you for purchasing TOPP PRO product, the TDX26 PLUS. TDX26 PLUS is 2 In Digital Signal Processor for
speaker management. For the input section, thereare Input Gain, 8 bands Parametric Equalizer(PEQ)and delay
functions for the stereo input signal processing. In the 6 / 4 output channels section, there are equipped
with Input selection, 5-band Parametric Equalizer, Crossover, Delay, Gain, Limiter,and Mute.In order to
make the users understand the ways of operation conveniently, it uses the LEDs and LCD to indicate the
respective parameter settings.
Please read this manual carefully so you can take advantages of all the features of the TDX26 PLUS.
Thanks again for choosing TOPP PRO.
1
TDX
PRESET
DELAY PREV NEXT ENTER
TDX26 PLUS
EDIT
MODE A B 1 2 3 4 5 6
UTILITY ESC
USB
2
TDX
4
PRESET
DELAY PREV NEXT ENTER
TDX26 PLUS
EDIT
MODE A B 1 2 3 4 5 6
UTILITY ESC
3
TDX
4
TDX
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4
OUTPUTS
3 2 1 INPUT B INPUT A
USB
USB
USB
5
TDX
6
TDX
7
TDX
TOPP PRO T DX 2 6 +
8
TDX
9
TDX
10
TDX
10
11
TDX
TOPP PRO
12
TDX
13
TDX
11
14
TDX
15
TDX
16
TDX
17
TDX
12
18
TDX
19
TDX
20
TDX
21
TDX
13
22
TDX
~
~
~
~
23
TDX
~
~
~
~
24
TDX
14
25
TDX
26
TDX
27
TDX
28
TDX
29
TDX
~
~
30
TDX
31
TDX
32
TDX
~ ~
33
TDX
15
16
34
TDX
35
TDX
36
TDX
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
37
TDX
TDX26 PLUS
~ ~
38
TDX
39
TDX
40
TDX
41
TDX
42
TDX
17
43
TDX
44
TDX
45
TDX
18
USB
USB
46
TDX
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
TDX26 PLUS
47
TDX
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
TDX26 PLUS
48
TDX
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
TDX26 PLUS
49
TDX
OUTPUTS
TDX26 PLUS
50
TDX
TDX26 PLUS
USB
TDX26 PLUS
USB
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
51
TDX
TDX26 PLUS
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
USB
USB
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
TDX26 PLUS
USB
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
AC INPUT: 100-240V~50/60Hz
FUSE: T630mAL AC250V
RATED POWER CONSUMPTION:14W OUTPUTS
POWER
ON
OFF
DIGITAL IN RS485 OUT RS485 IN USB 6 5 4 3 2 1 INPUT B INPUT A
52
TDX
19
53
TDX
20
USB
54
TDX
21 GUARANTEE
Topp Pro guarantees the normal operation of the product against any defect of manufacture
and/or vice of material, by the term of (12) months, counted as of the date of purchase on the part
of the user, committing itself to repair or to change, to its election, without position some, any
piece or component that will fail in normal conditions of use within the mentioned period.
This guarantee is valid if the original buyer will have to present /display this certificate properly
sealed and signed by the selling house, accompanied by the corresponding invoice of purchase
where it consisted the model and serial number of the acquired equipment.
The guarantee does not cover:
-Damages caused by the illegal use of the product, repair and/or nonauthorized modification
conducted by people by Topp Pro.
-Damages caused by the connection of the equipment to other equipment different from the
specified ones in the manual of use, or by bad connection to these last ones.
-Damages caused by electrical storms, blows and / or incorrect transport.
-Damages caused by excesses or falls of tension in the network or by connection to networks
with a tension different from the required one by the unit.
-Damages caused by the presence of sand, acid of batteries, water, or any strange element
inside the equipment.
-Deteriorations produced by the course of the time, use and/or normal wear of the unit.
-Alteraion or absence of the serial number of factory of the equipment.
The repairs could only be carried out the authorized technical service by Topp Pro , that will
inform about the term and other details into the repairs to take place according to this guarantee.
Topp pro, will repair this unit in counted a term nongreater to 30 days as of the date of entrance
of the unit to the Technical Service. In those cases in that due to the particularity of the spare
part, outside necessary their import, the repair time and the viability of the same one will be
subject to the effective norms for the import of parts, in which case one will inquire to the user
about the term and possibility into repair.
With the object of its correct operation, and of the validity of this one guarantee, this product
will have to be installed and to be used according to the instructions that are detailed in the
manual associate or the package of the product.
This unit will be able to appear for its repair, next to the invoice of purchase (or any other
comprobante where the date of purchase consists), to its authorized distributer Topp Pro or an
authorized technical center on watch by Topp Pro.
Exclusion of damages:
THE RESPONSIBILITY OF TOPP PRO BY ANY DEFECTIVE PRODUCT IS LIMITED THE REPAIR
OR THE REPLACEMENT OF HE HIMSELF, TO TOPP OPTION PRO. IF WE CHOSE TO REPLACE
THE PRODUCT, THE REPLACEMENT CAN BE A RECONDITIONATED UNIT. TOPP PRO WILL
NOT BE RESPONSIBLE BY THE DAMAGES BASED ON THE LOST, INCONVENIENCE, LOSS
OF USE, BENEFITS, LOST SAVINGS, BY THE DAMAGE TO OTHER EQUIPMENT OR OTHER
ARTICLES IN THE USE SITE, OR BY ANY OTHER DAMAGE IF HE IS FORTUITOUS,
CONSEQUENT OR OF ANOTHER TYPE, ALTHOUGH TOPP PRO HAS BEEN NOTICED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow to exclusion or the limitation to the fortuitous or consequent damages,
so the aforesaid limitation can not be applied to you.
This guarantee gives specific legal rights him, you can also have other right that varies of state
to state.
55
TDX
22
56
TDX