Beruflich Dokumente
Kultur Dokumente
: Beam 1
Jul 12, 2016
C:\Users\nag78425\Desktop\MasonryB1.masonry
Designing Please Wait
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 2 of 13
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 3 of 13
Successful
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 4 of 13
Successful
Stirrup configuration resists shear without adjusting block size and strength used for moment design.
Location Stirrup Stirrup
(mm) Stirrup in Shear (kN) Stirrup Size
Configuration Spacing
Cell
Cell
Start End Vf Vr LC Design Allowed Design Allowed Design Allowed
1 0 100 No - - - - - - - - -
2 100 200 No - - - - - - - - -
3 200 300 No - - - - - - - - -
No. 10, No.
4 300 400 No 2.24 6.88 #5 - None N -
15
No. 10, No.
5 400 500 No 2.24 6.88 #5 - None N -
15
No. 10, No.
6 500 600 No 2.24 6.88 #5 - None N -
15
No. 10, No.
7 600 700 No 1.86 6.88 #5 - None N -
15
No. 10, No.
8 700 800 No 1.40 6.88 #5 - None N -
15
No. 10, No.
9 800 900 No 0.93 6.88 #5 - None N -
15
No. 10, No.
10 900 1000 No 0.47 6.88 #5 - None N -
15
No. 10, No.
11 1000 1100 No -0.47 6.88 #5 - None N -
15
No. 10, No.
12 1100 1200 No -0.93 6.88 #5 - None N -
15
No. 10, No.
13 1200 1300 No -1.40 6.88 #5 - None N -
15
No. 10, No.
14 1300 1400 No -1.86 6.88 #5 - None N -
15
No. 10, No.
15 1400 1500 No -2.24 6.88 #5 - None N -
15
No. 10, No.
16 1500 1600 No -2.24 6.88 #5 - None N -
15
No. 10, No.
17 1600 1700 No -2.24 6.88 #5 - None N -
15
18 1700 1800 No - - - - - - - - -
19 1800 1900 No - - - - - - - - -
20 1900 2000 No - - - - - - - - -
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 5 of 13
25.0 mm Input,Design: Horizontal spacing between top bars CSA A371: 8.2.5.4.9
25.0 mm Input,Design: Vertical spacing between top bars CSA A371: 8.2.5.4.9
25.0 mm Input,Design: Horizontal spacing between bottom bars CSA A371: 8.2.5.4.9
25.0 mm Input,Design: Vertical spacing between bottom bars CSA A371: 8.2.5.4.9
Constants and factors
0.8 Factor: Compression block ratio CSA S304.1-04: 11.2.1.6
0.7 Factor: Compressive stress factor positive moment CSA S304.1-04: 11.2.1.6
0.6 Constant: Masonry resistance factor CSA S304.1-04: 4.3.2.1
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 6 of 13
j=1 1
Design: Number of bottom bars in layer j
j=1 1
mm Design: Diameter of top bars in layer j
j=1 11.3 mm
mm Design: Diameter of bottom bars in layer j
j=1 11.3 mm
mm Design: Area of top bars in layer j
j=1 100.0 mm
mm Design: Area of bottom bars in layer j
j=1 100.0 mm
mm
j=1 100.0 mm
100.0 mm
mm
j=1 100.0 mm
100.0 mm
Reinforcement location from top of the beam
55.65 mm
119.35 mm
3.2 kN-m
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 7 of 13
0.0 kN
CSA S304.1-04:
kN
11.2.1.3
j=1 0.0 kN
CSA S304.1-04:
34.0 kN
11.2.1.3
119.35 mm
5.65 mm
55.65 mm
0.0 mm
mm
j=1 100.0 mm
100.0 mm
mm
j=1 100.0 mm
0.0044
CSA S304.1-04:
0.002
11.2.3.1
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 8 of 13
-0.13 mm
2.92 mm
-0.23 mm
-0.15 mm
CSA
-0.08 mm S304.1-04:
11.4.4
CSA
131866946.2 mm S304.1-04:
11.4.3.2
CSA
1.1 kN-m S304.1-04:
11.4.3.2
CSA
0.85 MPa Input, Design: Masonry tensile strength S304.1-04
Table 5
CSA
0.0 MPa S304.1-04:
11.4.3.2
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 9 of 13
98.67 mm
CSA
0.9 kN-m Design: Maximum positive moment due to service loads S304.1-04:
11.4.3.2
131866946.2 mm
19040699.8 mm
mm
j=1 242405.9 mm
mm
j=1 12832523.5 mm
mm Design: Area of tension reinforcement in layer n
j=1 100.0 mm
mm Design: Area of compression reinforcement in layer n
j=1 100.0 mm
mm Design: Depth of tension reinformcent in layer n
j=1 119.35 mm
mm Design: Depth of compression reinformcent in layer n
j=1 55.65 mm
45.5 mm
mm
j=1 -23647.1 mm
mm
j=1 -173529.4 mm
200.0 mm Input: Height of the beam
23.5294
100.0 mm
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 10 of 13
119.35 mm
100.0 mm
55.65 mm
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 11 of 13
119.35 mm
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 12 of 13
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016
Page 13 of 13
file:///C:/Users/nag78425/AppData/Local/Temp/tmpSourceGridExport.htm 12-07-2016