Beruflich Dokumente
Kultur Dokumente
How can you configure your Alliance Access or Alliance Entry to test with the different modes available?
Information
1. Login your Test and Training LT (must have the future message syntax assigned)
2. Send an APC 072 message choosing any of the following options for field 127:
You can switch between the different available modes by sending an APC 072 message before the FIN Select. In that MT 072, you specify the exact
mode that you want to use for your FIN session.
3. Select your Test and Training LT choosing as Test Mode Selection, Full Function Mode or Local Test Mode depending on what you have
selected on the APC 072 message. If you have selected Local Test Mode then you must not select any delivery subsets.
Important Note :
You can receive an error code H30 (Message type does not exist for this application) when sending the MT 072 if you send the MT 072 after
having logged and selected the logical terminal rather than having performed the login only. Correct sequence is: login your Test and Training
LT, send MT 072, select your Test and Training LT.
If the LT gets interrupted, the reconnect will be done (if auto reconnect is enabled) using the same FIN session number and the LT remains
therefore in same mode (e.g. Full Future Mode)
As soon as a Logout has been done or an Abort of the LT occurred, the LT is automatically back into the default mode, which is Full Current
mode.
When you need to work in a different mode than Full Current mode, "automatic Select" usage is not appropriated as you need to get
systematically APC 072 message already sent and acked before the select FIN is sent. Use manual mode instead..
When you exchange T&T FIN messages with your counterparties, make sure that the sender and receiver are both using the same Full
Function mode (either both current, either both future) as FIN maintains separate delivery queues for current-format and future-format
messages.
For more information about the available options for these test facilities, see the SWIFT User Handbook, FIN Service Description, Test & Training.
Related information
Tip 1518163: How to request a message from the tank file (https://www2.swift.com/support/knowledgebase/tip/1518163)
https://www2.swift.com/kb/#/tip/367982 1/2
19/9/2017 Knowledge Base
Audience
Customer
Last update
23/03/2017
Product
Alliance Access
Release
Platform
Change request
Found in
Fixed in
https://www2.swift.com/kb/#/tip/367982 2/2