Beruflich Dokumente
Kultur Dokumente
Cascode Amplifier
Experiment No.
SCORE
Loop @ Q1:
VB1-VBE-IE1(RE)=0
re=26mV
IE2
=26mV
3.8mA
re = 6.8ohms
Av1=-re AvTotal=Av1(Av2)
re
=(-1)(-265)
Av1 = -1
AvTotal = 265
Av2=-Rc
Re Vo=AvTotal(Vi)
=-1.8k =(265)(25uV)
6.8ohms
Vo = 6.6mV
Av2 = -265
(Bustos, Christian Lloyd F.)
INTERPRETATION OF DATA
and convert the cascode amplifier configuration to its DC form to solve for the
unknown voltages including the VB1 and VB2. Of course solving also for the
All the currents are the same for this configuration, since we noticed its current
relationships between each other. Then after solving all of the unknowns using dc
analysis method, we proceed now on converting the circuit into its AC equivalent
model to solve for the Av1, Av2, AvTotal and lastly the Vo.
(Bustos, Christian Lloyd F.)
CONCLUSION
configuration are the same (IE1, IE2, IC1, and IC2). But, in terms of voltages, the
value of voltage (VB1) is different from the value of voltage (VB2). We solved also
the Av1 and Av2 to determine the AvTotal of the circuit. Also the Vo (output
values we computed is very close in terms of the values we measured from the
multisim software. With that, we can differentiate its values to each other and we
can determine that our computed values are correct. Lastly, when we used