Beruflich Dokumente
Kultur Dokumente
COURSE : MATS-1021-04
EXPERIMENT NO. : 03
STUDENT ID : 0786405
CLASS : PEM1.1A
Martensite
Ferrite
Pearlite
Ans. From the above results, it can be concluded that there are two
phases present in the annealed specimen that were ferrite and pearlite.
In annealed specimen both pearlite and ferrite are present in same
percentage that was 50 percent. It is interesting to note that only one
phase was present in the hardened that was tempered martensite.
Ans. After looking the hardness comparison chart from the Metal hand
book , it was found that :
CONCLUSION:
From the above analysis, it was observed that Hardened steel sample
posses higher hardness value as compare to the Annealed specimen
.There is huge difference in the figure for Brinell hardness both
hardened sample and annealed sample that were 784 and 184.33
consecutively. The reason behind that only one phase is present in the
hardened sample which was martensite that posses high hardness
value. Whereas , two phases ferrite and pearlite present in the
annealed sample which make it softer because the ferrite is softer in
nature as compared to other phase.