INSULATION LAYER -EPDM -EPDM: improved temperature
-PEEK and reliability: oil and decompression resistance may be selected -PEEK: it may provide improved mechanical properties that allow for improved damage resistance during cable installation and cab le operation. The higher stiffness of PEEK may also allow for greater ease in sealing aver cable members at cable termination points. Such construction can improve reliability of the cable and of a system. - May adhere to or be bonded to a conductor shield. Insulation may be continuous with an insulation shield, optionally completely or partially bonded. Metallic Shield Copper, - Can optionally be applied to aluminum, serve as a ground plane. Such a layer can serve to lead, or other electrically conductive isolate the various phases of the conductors of the material tape, cable from each other. braid, paint, or - Such a layer may also extrusion may serve as a barrier to downhole gas and fluids, be applied to protecting the provide a inner cable layers. conductive - Small amounts of additives to enhance properties layer. (e.g., copper bearing or antimonial lead) Barrier Layer An extruded or - May help protect a taped layer(s) cable from corrosive downhole gases and fluids of fluoropolymers, lead, or other material. Cable Jacket One or more -This jacket can help protect a cable from damage in layers of EPDM, extreme downhole environments. nitrile, HNBR, - Provides for damage resistance and balanced fluoropolymer, temperature distribution and electrical fields. chloroprene, or other material. Cable Armor Galvanized -May be resistant to downhole conditions. steel, stainless - Multiple layers of armor may be included or steel, applied for improved damage resistance. MONELCID alloy, or other metal, metal alloy, or non- metal