Beruflich Dokumente
Kultur Dokumente
(ADDS)
CONCEPT AND SYSTEM DESIGN
FOR
RATE CONTROLLED DRUG DELIVERY SYSTEM
SURAJ C.
1st M.Pharm
Dept. of Pharmaceutics
AACP
Page 1 of 18
Suraj C. (ADDS)
A. Polymer Membrane Permeation-Controlled DDS
A drug formulation is totally or partially encapsulated within a drug reservoir compartment.
The drug release surface is covered by a rate-controlling polymeric membrane having specific
permeability.
The drug reservoir may exist in solid, solution or suspension form.
The polymeric membrane can be fabricated by a non-porous polymeric material or a micro
porous membrane.
The encapsulation of drug formulation inside the reservoir compartment is by injection molding,
spray coating, capsulation, micro encapsulation or other techniques.
Different size and shape of DDS can be fabricated as in diagram.
The rate of drug release (Q/t) from Polymer Membrane Permeation CDDS should be a constant
value,
The drug reservoir is a suspension of progesterone crystals in silicone medical fluid and is
encapsulated in vertical limb of T-shaped device walled by a non porous membrane of
Ethylene Vinyl Acetate Copolymer.
Page 2 of 18
Suraj C. (ADDS)
It is designed to deliver progesterone in uterine cavity at a daily dosage rate of at least
65mcg/day to achieve contraception for one year.
The drug is a thin disk of pilocarpine complex sandwich between two transparent sheets of
micro porous ethylene vinyl complex membrane.
The micro porous membrane permit the tear fluid to penetrate into the drug reservoir
compartment to dissolve pilocarpine complex.
The drug molecule are released at a constant rate of 20 or 40 mcg/hr for management of
glaucoma for upto 7 days.
Page 3 of 18
Suraj C. (ADDS)
1) Blending therapeutic dose of finely ground drug particles with a liquid polymer or highly viscous
base polymer followed by cross linking of polymer chains.
2) Mixing drug solids with a rubbery polymer at an elevated temperature.
Drug polymer dispersion is then molded or extruded to form a drug delivery device of various
shapes and sizes designed for specific application.
The rate of drug release from this Polymer Matrix Diffusion CDDS is time dependent,
Q/t = (2ACRDP)
A = initial drug loading dose in polymer matrix.
CR = drug solubility in polymer (drug reservoir conc. in system)
DP = diffusivity of drug molecules in polymer matrix.
The release of drug is controlled at a preprogrammed rate by controlling the loading dose, polymer
solubility of drug and diffusivity of drug in polymer matrix.
It is fabricated by first heating an aqueous solution of water soluble polymer, glycerol and
polyvinyl alcohol.
The temperature of solution is then gradually lowered and nitroglycerine and lactose triturate
are dispersed just above the congealing temperature of solution.
The mixture is then solidified in mold at or below room temperature and then sliced to form a
medicated polymer disk.
It is designed for application onto intact skin for 24hr to provide a continuous transdermal
infusion of nitroglycerine at a dosage rate of 0.5mg/cm2/day for treatment of angina pectoris.
Page 4 of 18
Suraj C. (ADDS)
Different shapes and sizes of drug delivery system devices can be fabricated from this micro
reservoir DDS by molding or extrusion.
Depending on physicochemical properties of drug and the desired rate of drug release rate, the
device can be further coated with a layer of biocompatible polymer to modify the mechanism and
release rate.
Rate of drug release dQ/dt is
dQ/dt = Dp Dd m Kp ( n Sp Dl Sl (1-n) { 1 + 1 }
Dp hd + Dd hp m Kp hl Kl Km
m =a/b
a =ratio of drug conc in bulk of elution solution over drug solubility in the same medium.
b =ratio of drug conc at the outer edge of the polymer coating membrane over the drug
solubility in same polymer.
n =ratio of drug conc at the inner edge of interfacial barrier over the drug solubility in the
polymer matrix.
Kl =partition coefficient for interfacial partitioning of drug from liquid compartments to
polymer matrix.
Km =partition coefficient for interfacial partitioning of drug from polymer matrix to polymer
coating membrane.
KP =partition coefficient for interfacial partitioning of drug from polymer coating membrane to
elution solution.
Dl =diffusivity of drug in liquid layer surrounding the drug particles.
DP =diffusivity of drug in polymer coating membrane enveloping polymer matrix.
Dd =diffusivity of drug in hydrodynamic diffusion layer surrounding the polymer coating
membrane.
hl, hp, hd = thickness.
Sl =solubility of drug in liquid compartments.
Sp =solubility of drug in polymer matrix.
Release of drug molecules from this type of CDDS can follow either dissolution or matrix
diffusion-controlled process depending on relative magnitude of Sl and Sp.
The drug reservoir is formed by first preparing a suspension of nitroglycerine and lactose
triturate in an aqueous solution of 40% PEG 400 and dispersing it homogenously with
isopropyl palmitate, as dispersing agent, in a mixture of viscous silicone elastomers by high
energy mixing and then cross linking the polymer chain by catalyst.
Page 5 of 18
Suraj C. (ADDS)
It is then molded to form a solid medicated disk, on a drug-impermeable metallic plastic
laminate. It provides nitroglycerine at a daily dose of 0.5mg/cm2 for once-a-day medication of
angina pectoris.
2. ACTIVATION-MODULATED DDS
Here the release of the drug molecule from delivery system is activated by some physical,
chemical or bio-chemical process and/or facilitated by energy supplied externally.
Regulating the process applied or energy input controls the rate of drug release.
The rate of drug release is controlled by regulating process applied or energy input.
Classification is based on nature of process applied/type of energy used.
A. Physical means;
1. Osmotic Pressure-Activated DDS
2. Hydrodynamic Pressure-Activated DDS
3. Vapor Pressure-Activated DDS
4. Mechanically-Activated DDS
5. Magnetically-Activated DDS
6. Sonophoresis-Activated DDS
7. Iontophoresis-Activated DDS
8. Hydration-Activated DDS
B. Chemical means;
1. pH-Activated DDS
2. Ion-Activated DDS
Page 6 of 18
Suraj C. (ADDS)
3. Hydrolysis-Activated DDS
C. Biochemical means;
1. Enzyme-Activated DDS
2. Biochemical-Activated DDS
A. Physical Means:
1. Osmotic Pressure-Activated DDS
Q/t= Pw Am (s e)
hm
For drug delivery system containing solid formulation the intrinsic rate of drug release Q/t is,
Q/t= Pw Am (s e) Sd
hm
Pw = water permeability of semipermeable housing.
Am = effective surface area of semipermable housing.
hm = thickness of semipermable housing.
s e = differential osmotic pressure between drug delivery system with osmotic pressure s and
the environment with osmotic pressure e.
Sd = aqueous solubility of drug contained in solid formulation.
Release of drug is activated by osmotic pressure and controlled at a rate determined by water
permeability, effective surface area of semi permeable housing and osmotic pressure gradient.
E.g. - Acutrim,
an oral rate-controlled drug delivery system is a solid tablet of water soluble and osmotically
active phenylpropanolamine (PPA) HCl enclosed within a semi permeable membrane made
from cellulose triacetate. Semi permeable layer is further coated with PPA for immediate
release.
In GIT, GI fluids will dissolve immediately releasable layer, which provides initial dose and its
water components then penetrates through the semi permeable at a rate determined by
Pw.Am/hm to dissolve the controlled release dose of PPA under osmotic pressure differential
created (s e), the PPA solution is delivered at a controlled rate through an orifice predrilled
by a laser beam.
Page 7 of 18
Suraj C. (ADDS)
It is designed to provide a controlled delivery of PPA for duration of 16hr for appetite
suppression in a weight control program.
E.g- Alzet,
Alzet osmotic pump the drug reservoir which is normally a solution formulation ,is contained
within collapsible, impermeable polyester bags whose external surface is coated with a layer of
osmotically active salt, such as sodium chloride .
This reservoir compartment is then completely sealed inside a rigid housing walled with a
semipermeable membrane at the implantation site the water component in the tissue fluid
penetrates through the semipermeable housing at a rate determined by PwAm/hm to dissolve
osmotically active salt .
This creates an osmotic pressure in the narrow spacing between the flexible reservoir
compartment wall and regid semipermeable housing.
Under the osmotic pressure the resesvoir compartment is forced to reduce its volume and drug
solution is delivered at a controlled rate.
The drug concentration in the solution, different doses of drug can be delivered at a constant
rate for a period of 1-4 weeks.
Page 8 of 18
Suraj C. (ADDS)
compartment to reduce in volume and causes the liquid drug formulation to release through the
delivery orifice.
Q/t= Pf Am (s-e)
hm
Pf = fluid permeability.
Am = effective surface area of wall.
hm = thickness of wall with annular openings.
s-e = differences in hydrodynamic pressure between drug delivery system and environment.
Release of drug molecule from this type system is activated by hydrodynamic pressure and
controlled at a rate determined by fluid permeability, effective surface area of wall and
hydrodynamic pressure gradient.
Page 9 of 18
Suraj C. (ADDS)
The rate of delivery Q/t is defined by,
Q/t= d4 (Ps-Pe)
40.74 l
Release of drug is activated by vapor pressure and controlled at a rate determined by differential
vapor pressure, formulation viscosity and size of delivery cannula.
E.g. - Infusaid
for intranasal administration of a precision dose of buserlin (synthetic analogue of LHRH and
insulin)
Page 10 of 18
Suraj C. (ADDS)
5. Magnetically-Activated DDS:
In this type of system, the drug reservoir is a dispersion of peptide or protein powders in a
polymer matrix from which macromolecular drug can be delivered at a relatively slow rate.
This low rate of delivery can be improved by incorporating an electromagnetically triggered
vibration mechanism into the polymeric delivery device combined with a hemispherical design.
A sub-dermally implantable, magnetically activated drug delivery device is fabricated by first
positioning a tiny magnet ring in the core of a hemispherical drug-dispersing polymer matrix and
then coating its external surface with a drug impermeable polymer such as ethylene-vinyl acetate
copolymer or silicone elastomers, except one cavity at the center of flat surface.
This uncoated cavity is positioned directly above the magnet ring, which permits a peptide drug to
be released.
It is used to deliver protein drugs, such as bovine serum albumin, at a low basal rate, by a simple
diffusion process under non triggering conditions.
As the magnet is activated to vibrate by an external electromagnetic field, the drug molecules are
delivered at a much higher rate.
6. Sonophoresis-Activated DDS:
This type of DDS utilizes ultrasonic energy to activate the delivery of drugs from a polymeric
drug delivery device.
The system can be fabricated from either a non-degradable polymer such as ethylene-vinyl
acetate copolymer or a bioerodible polymer,such as poly [bis (p-carboxy phenoxy) alkane
anhydride.
Page 11 of 18
Suraj C. (ADDS)
7. Iontophoresis-Activated DDS:
This type of system uses electrical current to activate and modulate the diffusion of a charged
drug molecule across a biological membrane, like skin, in a manner similar to passive diffusion
under a concentration gradient.
Iontophoresis- facilitated skin permeation rate of a charged molecule i consists of three components
and is expressed by,
Jiisp=Jp+Je+Jc
JP = Passive skin permeation flux.
JP = KsDs dc
Hs
Je = Electrical current- driven permeation flux.
Je = ZiDiF Ci dE
RT hs
Jc = Convective flow-driven skin permeation flux.
Jc = K CsId
Ks = partition coefficient for interfacial partitioning from donor solution to stratum corneum.
Ds = diffusivity across the skin.
Di = diffusivity of ionic species i in the skin.
Ci = donor concentration of ionic species i the skin.
Cs = concentration in skin tissues.
dE = electrical potential gradient across skin.
hs
dc = concentration gradient across skin.
hs
Zi = electrical valence of ionic species i.
Id = current density applied.
F = faraday constant.
K = proportionality constant.
R = Gas constant.
T = Absolute temperature.
E.g.-
Page 12 of 18
Suraj C. (ADDS)
This type of system depends on hydration induced swelling process to activate the release of
drug.
The drug reservoir is homogeneously dispersed in a swellable polymer matrix fabricated from
hydrophilic polymer.
The release of drug is controlled by the rate of swelling of polymer matrix.
B. Chemical means:
1. pH-Activated DDS:
This type of DDS permits the delivery of a drug only in the region with a selected pH range.
It is fabricated by coating the drug containing core with a pH sensitive polymer combination.
Gastric fluid labile drug is protected by encapsulating it inside a polymer membrane that resists the
degradative action of gastric pH, such as combination of ethyl cellulose and hydroxy
methylcellulose phthalate.
Page 13 of 18
Suraj C. (ADDS)
In stomach, coating membrane resists the action of gastric fluid and the drug molecules are thus
protected from acid degradation.
After gastric emptying the drug delivery system travels to small intestine and intestinal fluid will
activate the erosion of intestinal fluid soluble hydroxy methylcellulose phthalate component from
coating membrane.
This leaves a micro porous membrane of intestinal fluid insoluble polymer of ethyl cellulose,
which controls the release of drug from the core tablet.
The drug solute is thus delivered at a controlled manner in intestine by combination of dissolution
and pore-channel diffusion.
By adjusting the ratio of intestinal fluid soluble polymer to intestinal fluid insoluble polymer, the
membrane permeability of drug can be regulated as desired.
2. Ion-Activated DDS:
Page 14 of 18
Suraj C. (ADDS)
GI fluid regularly maintains a constant level of ions, theoretically the delivery of drug from this
ion-activated oral drug delivery system can be maintained at a relatively constant rate.
3. Hydrolysis-Activated DDS:
This type of activation controlled drug delivery system depends on hydrolysis process to activate
the release of drug molecules.
Here, drug reservoir is either encapsulated in microcapsules or homogeneously dispersed in
microspheres or nanoparticles for injection.
It can also be fabricated as an implantable device.
All these systems are prepared by bioerodable polymer such as co(lactic-glycolic) polymer,
polyorthoester or poly anhydride.
The release of drug from polymer matrix is activated by hydrolysis induced degradation of
polymer chains and controlled by the rate of polymer degradation.
E.g.
Page 15 of 18
Suraj C. (ADDS)
C. Biochemical means
1. Enzyme-Activated DDS:
This type of activation controlled drug delivery system depends on enzymatic process to activate
the release of drug.
In this system the drug reservoir is either physically entrapped in microspheres or chemically
bound to polymer chains from biopolymer, such as albumin or polypeptides.
The release of drug is activated by enzymatic hydrolysis of biopolymers by a specific enzyme in
the target tissue.
E.g.-
Page 16 of 18
Suraj C. (ADDS)
B. Bioresponsive DDS;
In this system, the drug reservoir is contained in a device enclosed by a Bioresponsive polymeric
membrane whose drug permeability is controlled by the concentration of biochemical agent in the
tissue where the system is located.
E.g.
C. Self-Regulating DDS;
This type of feedback regulated drug delivery system depends on a reversible and competitive
binding mechanism to activate and to regulate the release of drug.
Page 17 of 18
Suraj C. (ADDS)
In this system the drug reservoir is a drug complex encapsulated a semipermable polymeric
membrane.
The release of drug from the delivery system is activated by the membrane permeation of a
biochemical agent from the tissue in which the system is located.
E.g.
Reversible binding of sugar molecules by lectin in the design of self regulating drug delivery
system. It first involves preparation of biologically active insulin derivatives in which insulin
is coupled with a sugar (maltose) and this into an insulin-sugar-lectin complex.
The complex is then encapsulated within a semi permeable membrane. As blood glucose
diffuses into the device and competitively binds at the sugar binding sites in lectin molecules,
this activates the release of bound insulin-sugar derivatives.
The released insulin-sugar derivatives then diffuse out of the device, and the amount of
insulin-sugar derivatives released depends on the glucose concentration. Thus a self regulating
drug delivery is achieved.
REFERENCES
Page 18 of 18