Beruflich Dokumente
Kultur Dokumente
Hans Ramsvik
Nautical Class - History
2003: NAUT-OSV
Introducing guidelines for Offshore Service Vessels
NAUT-OSV
2006: NAUT-OSV guidelines converted to rules.
NAUT-OC covers :
Workstations for Commanding control, Navigation, Safety, etc.
Field of vision from workstations
Location of instruments and equipment
Bridge working environment
Range of instrumentation
Instrument and system performance, functionality and reliability
Bridge Alarm management
Extended testing of Bridge equipment
n View astern from the commanding position for easy use of leading marks
and navigational landmarks. The view astern may be obtained either by
visual sight or by means of camera solutions.
n ECDIS
n Track Control System (Grounding Avoidance System)
n Chart radar
n Fully equipped bridge wing consoles with steering control and propulsion/
thruster control for safe docking operations
Pt.6 Ch.8
Section
Section 44 Carriage
Carriage requirements
requirements for
for Navigational
Navigational Systems
Systems and
and Equipment
Equipment
Section
Section 55 General
General Bridge
Bridge Equipment
Equipment Requirements
Requirements
Section
Section 66 Specific
Specific Requirements
Requirements forfor Different
Different Types
Types of
of Bridge
Bridge Equipment
Equipment
Section
Section 77 Man
Man and
and Machine
Machine Interface
Interface
Section
Section 88 Ship
Ship Manoeuvring
Manoeuvring Information
Information
Section
Section 99 Qualifications
Qualifications and
and Operational
Operational Procedures
Procedures
Section
Section 10
10 Bridge
Bridge Equipment
Equipment Tests
Tests
Communication
Safety
225
180
Version 12/12/2007 Slide 15
Field of vision Alignment of blindsectors
Alignment of front windows divisions with the operators line of sight as
seen from the main working position reduce blindsectors
Rubber Packing
Steel Stiffener
Glass
Glass
Eye height
2000 mm
1400 mm
1000 mm
1200 mm
800 mm
700 mm
350 mm
800 mm 400 mm
1500 mm
2700 mm
The width of the passageway shall be 1200 mm at not less than 700
mm at any single point of obstruction.
If the front consoles are not located directly against the bulkhead,
the width of the passageway in front of the consoles shall not be less
than 800mm.
Eye
height
2100 mm
1400 mm
1200 mm
1000 mm
The height of the console for workstations for
350 mm navigation, traffic surveillance and manoeuvring
1500 mm
shall not exceed 1200mm
Surfaces: The bridge surfaces finishes shall have a matt coating and
colours with low reflection range in order to reduce reflections and
indirect glare to a minimum. Deck head areas above workstations,
bulkheads at window heights and consoles are of special importance.
Safety of personnel: