Beruflich Dokumente
Kultur Dokumente
SEATWORK
1. The The compound bar carries the axial 3. The following data were obtained during a tension
forces P and 2P. Find the maximum test of an aluminum alloy. The initial diameter of the
allowable value of P if the working test specimen was 0.505 in., and the gage length was
stresses are 40 ksi for steel and 20 ksi for 2.0 in.
aluminum, and the total elongation of the
bar is not to exceed 0.2 in. Load (lb) Elongation(in) Load (lb) Elongation(in)
0 14000 0.02
2310 0.0022 14000 0.025
4640 0.0044 14500 0.06
6950 0.0066 14600 0.08
9290 0.0088 14800 0.1
11600 0.0110 14600 0.12
13000 0.015 13600 Fracture
2. The steel bars AC and BC, each of cross-
sectional area 120 mm2, are joined at C
with a pin. (a) Determine the displacement 1. Find the proportional limit.
of point C caused by the 15-kN load. Use 2. Find the modulus of elasticity.
E = 200 GPa for steel. Find the ultimate strength