Beruflich Dokumente
Kultur Dokumente
BIPI-QHS-QF-008-00
Failure to check Air Cylinder supply Ensure that the Cylinder Pressure Divers, Foreman, PIC, Safety
1. Inspection and Preparation Work has supply of 50 bar minimum Officer
environment, diving equipment, materials, diving safety margin. Terminate the dive
team when cylinder reaches a pressure
of 30 bar
No Proper Coordination about the Diving objectives Conduct dive briefing prior to
activity
All diving team are aware of their
duties and responsibilities
Contact with Pathogenic Contaminated Water Wear and ensure diving suit in
good condition. Check divers of
any open wound
Diving under the influence of alcohol or drugs, or Avoid use of substances that are
with a hangover known or suspected to reduce the
ability to respond appropriately to
contingencies
Document Code:
BIPI-QHS-QF-008-00
Exposure to cold water during descent, and wind Avoid staying out of the wind, and
chill after ascent stay dry
Wear suitable protective clothing
3. Leveling of lake bed by air lifting Poor Visibility Provide a Divers Attendant for
proper monitoring of the divers
location and position
Entanglement of Lifeline and Air Lifting Hose Divers Attendant should maintain
lifeline and Air Lifting Hose away
from the body of the diver so as
not to make the lifeline and Air
Lifting Hose intertwine to the body
of the diver
4. Underwater installation of Beam Stopper Poor Visibility Provide a Divers Attendant for
proper monitoring of the divers
location and position
Unstable Footing
5. Under Water Welding of Guide Rail
Decompression Sickness
Appropriate Welding Equipment,
Electric Shock
properly insulated, and controlled
current
6. Post-dive Safety Check
Name Designation Signature Date
Prepared by: Carlos A. Fabillar Safety Officer
Approved by: Engr. Joselito Q. Arrienda Project Manager