Beruflich Dokumente
Kultur Dokumente
Updated for:
AppDirector 2.14
North America
Radware Inc.
575 Corporate Dr. Suite 205
Mahwah, NJ 07430
Tel 888 234 5763
International
Radware Ltd.
22 Raoul Wallenberg St.
Tel Aviv 69710, Israel
Tel 972 3 766 8666
www.radware.com
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 2 -
Introduction
This document discusses SNMP traps generated by AppDirector.
Part of the traps will use the same OID and specific trap ID for different events. The
difference between each event can be seen only on the message text, transferred
on the value of object 1.3.6.1.4.1.89.2.3.1.0 as text.
The trap severity is passed on the value of the object 1.3.6.1.4.1.89.2.3.2.0
(rndErrorSeverity) as a number as listed:
1 = Info
2 = Warning
3 = Error
Standard Traps
When sending SNMPv1 standard traps, the Enterprise ID is set to a different OID for
each product. The options for AppDirector are:
1.3.6.1.4.1.89.1.1.62.20 for AppDirector
1.3.6.1.4.1.89.1.1.62.21 for AppDirector-Global
Name .coldStart
Generic Trap
(SNMPv1) .0
Trap OID (SNMP
v2/3) .1.3.6.1.6.3.1.1.5.1
A coldStart trap signifies that the sending protocol entity is reinitializing
itself so that the agent's configuration or the protocol entity implementation
Description can be altered.
Trap Text Cold Start
Name .warmStart
Generic Trap
(SNMPv1) .1
Trap OID (SNMP
v2/3) .1.3.6.1.6.3.1.1.5.2
A warmStart trap signifies that the sending protocol entity is reinitializing
itself so that neither the agent configuration nor the protocol entity
Description implementation can be altered.
Trap Text Warm Start
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 3 -
Name .linkDown
Generic Trap
(SNMPv1) .2
Trap OID (SNMP
v2/3) .1.3.6.1.6.3.1.1.5.3
A linkDown trap signifies that the sending protocol entity recognizes a
failure in one of the communication links represented in the agent's
configuration.
A Trap-PDU of type linkDown contains, as the first element of its variable-
bindings, the name and value of the ifIndex instance for the affected
Description interface.
Trap Text VLAN <id> Down
SFP module was removed in port <Port Id>. Auto Negotiation was enabled
on the port
Name .linkUp
Generic Trap
(SNMPv1) .3
Trap OID (SNMP
v2/3) .1.3.6.1.6.3.1.1.5.4
A linkUp trap signifies that the sending protocol entity recognizes that one
of the communication links represented in the agent's configuration has
come up.
A Trap-PDU of type linkUp contains, as the first element of its variable-
bindings, the name and value of the ifIndex instance for the affected
Description interface.
Trap Text VLAN <id> Up
SFP module was detected in port <port id>. Auto Negotiation on the port is
enabled
SFP module was detected in port <port id>. SFP has precedence over the
copper port. Auto Negotiation on the port is enabled
Name .authenticationFailure
Generic Trap
(SNMPv1) .4
Trap OID (SNMP
v2/3) .1.3.6.1.6.3.1.1.5.5
An authenticationFailure trap signifies that the sending protocol entity is the
Description addressee of a protocol message that is not properly authenticated.
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 4 -
Login failed user <user> via [web | terminal | telnet | ssh | ftp | soap |
Trap Text unknown]: radius problems
Login via ssh failed!
secure SNMP: password authentication failure
AppDirector Traps
The list of AppDirector specific traps uses the following format:
Note: The Enterprise ID is shown in string representation, while the Specific trap number
is in numerical format.
In SNMPv1 traps:
Enterprise = Enterprise ID
Generic Trap Type = 6 (Enterprise specific)
Specific Trap Code = Specific trap number
In SNMPv2 traps:
Trap OID = <Enterprise ID>.<Specific trap number>
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 5 -
Farm <Farm Name> Radius <Server IP> Port <check port>: Unauthorized
user.
Farm <Farm Name> Radius <Server IP> Port <check port>: Unfamiliar
reply code.
Farm <Farm Name> Radius <Server IP> Port <check port>: Unavailable.
Farm <Farm Name> Radius <Server IP> Port <check port>: Configuration
error.
Farm <Farm Name> Server <Server IP> Web Page Unavailable on Port
<check port>
Farm <Farm Name> Server <Server IP> Content Check Failure.
Farm <Farm Name> Server <Server IP> No Page on Port <check port>,
Code <response code>
Enterprise ID .iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServer
Dispatcher. = .1.3.6.1.4.1.89.35.1
Name .rsWSDConnectionLimitReached = rnd.rndApplications.rsServerDispatcher.1
This warning is generated when the users connection limit of an application
Description or a physical server is reached.
Trap severity Warning
Trap Text Connection limit reached for server <IP> farm <Name>
Connection limit reached for physical server <server name>
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDi
Enterprise ID spatcher.rsNWSD = .1.3.6.1.4.1.89.35.1.40
.rsWSD.rsWSDDynamicNATOutOfPorts =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.7
Description This warning is sent when the allocation for Client NAT ports is exhausted.
Trap severity Warning
Trap Text No more free dynamic NAT ports
.rsWSD.rsWSDNHRDown =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.9
This warning trap is sent when an NHR does not respond to connectivity
Description checks within the defined timeout.
Trap severity Warning
Trap Text NHR <NHR IP> is down
Invalid route has located NHR <NHR IP> on management port
.rsWSDRequestTablesFull =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.11
Description The Request Table is full. Increase table size in Tuning
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 16 -
.rsWSDDynamicSIDTablesFull =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.12
Description The Dynamic Session ID Table is full. Increase table size in Tuning
Trap severity Warning
Trap Text Dynamic SID table full, see Device Tuning in AppDirector manual
.rsWSDClientNATPortsThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.15
The configured Threshold Warning for Client NAT Ports was reached for one
Description of the configured client NAT Addresses.
Trap severity Warning
Trap Text Client NAT Port Number Threshold Reached, NAT address <address>
. rsWSDOutboundNATPortsThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.16
The configured Threshold Warning for Outbound NAT Ports was reached for
Description one of the configured Outbound NAT Addresses
Trap severity Warning
Trap Text Outbound NAT Port Number Threshold Reached, NAT address <address>
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 17 -
.rsWSDDSIDTableEntriesThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.17
Description The configured Threshold Warning for the Session ID Table was reached.
Trap severity Warning
Trap Text Dynamic Session Id entries number threshold reached
.rsWSDRequestTableEntriesThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.18
Description The configured Threshold Warning for the Request Table was reached.
Trap severity Warning
Trap Text Request Table entries number threshold reached
.rsWSDClientTableThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.19
Description The configured Threshold Warning for the Client Table was reached.
Trap severity Warning
Trap Text Client table threshold level was reached
.rsWSDAppServerConnectionThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.20
The configured Threshold Warning for Application Server Connection was
Description reached for one of the Application Servers
Trap severity Warning
Trap Text Connection limit threshold reached for server <IP address> farm <Name >
.rsWSDPhyServerConnectionThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.21
The configured Threshold Warning for Physical Server Connection was
Description reached for one of the Physical Servers
Trap severity Warning
Trap Text Connection limit threshold reached for physical server <server name>
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 18 -
.rsWSDFarmCapacityThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.22
The configured Threshold Warning for Farm Capacity was reached for one of
Description the farms
Trap severity Warning
Trap Text Capacity Threshold Reached, farm <farm name>
rdwrVrrpAutomatedConfigurationVIPNotAssociated =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.25
Description This trap is sent when new L4 policy is not entered to the associated IP table
Trap severity Warning
Could not automatically determine a VRID for VIP <IP address>; this VIP was
Trap Text excluded from the Automated VRRP Configuration updates
VIP <IP address> already associated to VRID
rsWSDAuxiliaryTableThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.32
Description This informational trap is sent when L3 client table threshold is reached
Trap severity Warning
Trap Text L3 Client table threshold level was reached
L3 client table is full, please increase its percentage of the client table
rsWSDRemoteWSDAvailable =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.33
Description This info is generated after remote AppDirector server became available
Trap severity Info
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 19 -
Trap Text [Remote | Local] [AppDirector | AppDirectorXL] server <IP> now available
rsADFailedL7ModificationOfServerSidToken =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.36
This warning trap is sent when using L7 Modification containing the
$Server_SID_Cookie token (usually utilizing the Insert Cookie feature), and
no static SID is configured for the server that belongs to a treated session.
Description The Modification is not performed and the packet is discarded.
Trap severity Warning
L7 Modification using $Server_SID_Cookie was aborted because there was
Trap Text no static SID entry in the static SID table
rdwr30SecCpuUtilizationAvarageExceededThreshold =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.37
This trap is sent when the 30 seconds CPU utilization average has exceeded
Description the defined threshold
Trap severity Warning
30 seconds average of Device CPU Utilization has exceeded a threshold of
Trap Text <threshold>
rdwr30SecCpuUtilizationAvarageBelowThreshold=
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.38
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 20 -
This trap is sent when the 30 seconds CPU utilization average has returned
Description below the defined threshold
Trap severity Info
30 seconds average of Device CPU Utilization has returned to a value below
Trap Text threshold <threshold>
rdwrTrafficThroughputLimitReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.40
Description This trap is sent when the traffic throughput limit is reached
Trap severity Info
Trap Text Maximum licensed throughput reached
.rsWSDDXPChannelActive =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.41
Description This warning trap is sent when DXP channel changes state to Active.
Trap severity Warning
Trap Text Management-Engine ID <CPU ID> status is Active
Accel -Engine ID <CPU ID> status is Active
.rsWSDDXPFailedDXPConfigUpdate =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.43
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 21 -
Description This warning trap is sent when DXP channel fails on config update notify.
Trap severity Warning
Trap Text Accel-Engine ID <CPU ID> Failed to update last configuration change
.rsWSDDXPSystemActive =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.44
Description This warning trap is sent when DXP system changes state to Active.
Trap severity Warning
Accel-Engine System ID <CPU ID> status is Backup connected with
Trap Text <Number> applications
.rsWSDProxyTempCECLimitStop =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.49
Temporary limitation of maximum number of connections due to memory
Description limitation has stopped.
Trap severity Info
Temporary limiting of maximum number of connections due to memory
Trap Text pressure has stopped.
.rsWSDProxyCacheLimitShortSpace =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.50
Description Temporary limiting caching due to critical cache space shortage.
Trap severity Warning
Trap Text Critical cache capacity usage, Temporary avoiding caching of new objects
.rsWSDProxyCacheReached80Percent =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.51
Description Cache space has reached 80%.
Trap severity Info
Trap Text Cache capacity usage is above 80%
.rsWSDProxyCacheBelow80Percent =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.52
Description Cache space is below 80%.
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 22 -
.rsWSDProxyCPUCrossed80Percent =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.54
Description CPU utilization has reached 80%, while before that it was below 80%.
Trap severity Warning
Trap Text CPU utilization has reached 80
.rsWSDProxyCPUFell80Percent =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.55
Description utilization has dropped below 80%, while before that it was above 80%.
Trap severity Info
Trap Text CPU utilization has dropped below 80
.rsWSDProxyOCSPServerError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.62
Failed to connect to OCSP server to verify certificate validity. Certificates will
Description be rejected until connection is reestablished.
Trap severity Error
Client certificate OCSP validation Could not connect to OCSP Responder
Trap Text [<OCSP-hostname>].
.rsWSDProxyOCSPResponseVerificationError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.63
Description Failed to verify OCSP response. Certificate will be rejected.
Trap severity Error
Trap Text Client certificate OCSP validation, Response signature verification mismatch.
.rsWSDProxyOCSPQueryingError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.64
Failed to query <OCSP-hostname> OCSP server for certificate validity.
Description Certificate will be rejected.
Trap severity Error
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 23 -
.rsWSDProxyCertificateRevokedRevocation =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.65
Description Certificate was revoked.
Trap severity Info
Client certificate OCSP validation Response [Served from OCSP cache | "" ]:
Trap Text certificate revoked.
.rsWSDProxyCompDisableDueMemoryLimit =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.69
Description Compression disabled due memory limit.
Trap severity Warning
Trap Text Temporary disabling compression due to memory shortage
.rsWSDProxyCompEnableAfterMemoryLimit =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.70
Description Compression enabled after memory limit.
Trap severity Warning
Trap Text Re-enabling compression due to memory shortage relief
.rsWSDProxyCompLicenseOverFlow =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.71
Description Compression License over flow.
Trap severity Warning
Trap Text Compression license overflow
.rsWSDProxyTslOcspCertificateRevoked =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.74
Description TSL OCSP Certificate revoced.
Trap severity Warning
Client certificate OCSP validation Response [Served from OCSP cache | ""]:
Trap Text certificate revoked.
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 24 -
.rsWSDProxyTslOcspCertificateUnknown =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.75
Description TSL OCSP Certificate unkonwn.
Trap severity Warning
Client certificate OCSP validation, certificate: <Certificate Name>, response:
Trap Text certificate status unknown
.rsWSDProxyTslSignValidationFailure =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.77
Description TSL sign validation failure.
Trap severity Warning
TSL update error: <String>. TSL file chain <Chain Name>, root certificate
Trap Text <Certificate Name>.
.rsWSDProxyTslNewSeqLessThanExisting =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.78
Description TSL new sequence less than existing.
Trap severity Warning
TSL update error: New TSL file <File Name> validity period (\"NextUpdate\")
Trap Text cannot be extracted from file. TSL file chain <Chain Name>.
.rdwrThroughputLicenseThresholdReache =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.80
Description This trap is sent when the traffic throughput threshold is reached
Trap severity Warning
Trap Text Licensed throughput threshold reached
.rsADSSLThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.81
Description This trap is sent when the ssl traffic throughput threshold is reached
Trap severity Warning
Trap Text SSL CPS limit threshold of <Percent> percents is reached
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 25 -
.rsADCompressionThresholdReached =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.82
Description This trap is sent when the traffic compression rate threshold is reached
Trap severity Warning
Trap Text Compression rate limit threshold of <Percent> percents is reached
.rsWSDProxyTslInvalidOcspSigningAlg =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.84
This trap is sent when the OCSP response is signed using non-authorized
Description signing algorithm
Trap severity Error
TSL update error: TSL file signing certificate OCSP validation failed. TSL file
Trap Text chain<Chain Name>, File recieved from <URI> URI.
.rsWSDProxyTslFetcherFetchingError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.85
Description This trap is sent when a error occurs during TSL file fetching
Trap severity Error
Fetching error: unable to fetch TSL, file Chain [<File Name>] chain <Chain
Trap Text Name>.
.rsWSDProxyTslFetcherSignatureError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.86
Description This trap is sent when the TSL signature fails to verify
Trap severity Error
TSL update error: Error validating TSL XML file: <File Name>. TSL file chain
<File Name>, root certificate <Certificate Name>, File recieved from <URI>
Trap Text URI.
.rsWSDProxyTslFetcherOcspError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.87
Description This trap is sent when a TSL signature OCSP request fails
Trap severity Error
Trap Text TSL update error: TSL file signing certificate OCSP validation failed. TSL file
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 26 -
.rsWSDProxyTslFetcherXmlParsingError =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.88
Description This trap is sent when AppDirector fails to parse an TSL XML file
Trap severity Error
TSL update error: TSL XML malformed file, TSL file chain <Chain Name>, from
Trap Text the <URI> location.
.rsWSDProxyTslFetcherIdenticalSequenceNumber =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.89
Description This trap is sent when a new fetched TSL file is identical to the existing one
Trap severity Info
TSL update info: No need to update configuration due to identical sequence
numbers (<Seq Number>) and TSL Id's (<TSL Id>) for new and existing TSL
Trap Text files. File chain <Chain Name>
.rsWSDProxyTslTslFetchingDone =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.90
Description This trap is sent when a new TSL file is fetched successfuly
Trap severity Info
Fetching info: Newly received "\"next root\" will be updated in TSL file chain
Trap Text [<Chain Name>].
.rsWSDProxySSLCpsLicenseOverFlow =
Name rnd.rndApplications.rsServerDispatcher.rsNWSD.91
Description SSL Cps License overflow
Trap severity Warning
Trap Text CPS license overflow
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 27 -
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDi
Enterprise ID spatcher.rsBWM = .1.3.6.1.4.1.89.35.1.60
Name .rsBWMPacketBlocked = rnd.rndApplications.rsServerDispatcher.rsBWM.1
Description This informational trap is sent when packets are blocked.
Trap severity Info
Packet(s) blocked by policy <policy name> <number> packet(s): src <IP>,
Trap Text dest <IP>
Additional <number> packet(s) blocked by policy <policy name>
Not enough discrete IP's: <IP> was not added to network <name>
Traffic overload terminated: Processing all packets (DoS Shield)
Traffic Overload! Currently processing <num>% percent of traffic (DoS
Shield)
.rsBWMFilterCreationFailed =
Name rnd.rndApplications.rsServerDispatcher.rsBWM.3
Description An error occurred while the user configured a new filter (NOT IN USE)
Trap severity Warning
Trap Text BWM: Filter creation error.
Note: The BWM traps are only relevant when a BWM license is present
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDisp
Enterprise ID atcher.rsCCK = .1.3.6.1.4.1.89.35.1.79
Name .rsCCKElemIsUp = rnd.rndApplications.rsServerDispatcher.rsCCK.1
This informational trap is sent when the Health Monitoring module set the status
Description of an element to Active.
Trap severity Info
Trap Text Health Monitoring: check <Check Name> is up
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 28 -
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDisp
Enterprise ID atcher.rsSESSION = .1.3.6.1.4.1.89.35.1.88
Name .rsACCFlowTableFull = rnd.rndApplications.rsServerDispatcher.rsSESSION.1
Description Flow table is full!!!
Trap severity Warning
Trap Text Flow table is full!!!
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDis
Enterprise ID patcher.rsSESSION = .1.3.6.1.4.1.89.35.1.104
Name .rsSESSIONTablesFull = rnd.rndApplications.rsServerDispatcher.rsSESSION.1
Description Session table is full
Trap severity Error
AppDirector 2.14 SNMP Traps
Date: December 31, 2010
Page - 29 -
.rsSESSIONSynTriggerUpdate =
Name rnd.rndApplications.rsServerDispatcher.rsSESSION.2
Description
Trap severity Error
Trap Text Syn Attack warning - Traps limit reached. Some traps were not sent
Syn-Ack Reflection Attack <name> for source IP <IP>
.iso.org.dod.internet.private.enterprises.rnd.rndApplications.rsServerDi
Enterprise ID spatcher.rsStatistics = .1.3.6.1.4.1.89.35.1.73
.rsStatisticsReportingProblems =
Name rnd.rndApplications.rsServerDispatcher.rsStatistics.1
Description This trap is sent to inform the user about problems in statistics reporting.
Trap severity Error
Trap Text Unable to establish TCP connection
statistics_max_ODTP_packet_size_update: Invalid MTU
statistics_max_ODTP_packet_size_update: Unable to find destination
interface for <IP>
Entry binding failed while creating statistics for TCP session
Entry binding failed while creating statistics for HTTP session