Beruflich Dokumente
Kultur Dokumente
Content
1. General Information…………………………………………………………………………………1
1.1 Welcome……………………………………………………………………………………………1
1.2 Safety precautions………………………………………………………………………………1
1.3 Cleaning and maintenance…………………………………………………………………..1
2. Getting Start……………………………………………………………………………………………2
2.1 Unpacking………………………………………………………………………………………….2
2.2 Technical parameters…………………………………………………………………………..2
2.3 Appearance…………………………………………………………………………………………2
2.3.1 LED indicator……………………………………………………………………………….2
2.4 Interface and Installation
2.4.1 Interface description…………………………………………………………………….2
2.4.2 Installation…………………………………………………………………………………..3
2.5 About R-UIM Card………………………………………………………………………………..3
2.5.1 R-UIM card…………………………………………………………………………………..3
2.5.2 Usage of R-UIM Card…………………………………………………………………….3
3 Basic Operations………………………………………………………………………………………..4
3.1 Access Internet……………………………………………………………………………………4
3.1.1 Settings……………………………………………………………………………………….4
3.1.2 Dial……………………………………………………………………………………………..4
3.2 Voice call…………………………………………………………………………………………….5
3.2.1 Dial a call…………………………………………………………………………………….5
3.2.2 Receive a call……………………………………………………………………………….6
3.2.3 During a call…………………………………………………………………………………6
3.2.3.1 Earphone Volume………………………………………………………………6
3.2.3.2 DTMF tone………………………………………………………………………..6
3.2.4 Call history………………………………………………………………………………….6
3.3 Short Message Service………………………………………………………………………….7
3.3.1 Send SMS…………………………………………………………………………………….7
3.3.2 Receive SMS………………………………………………………………………………..8
3.3.3 Message box………………………………………………………………………………..8
3.4 Phone book………………………………………………………………………………………….8
4 Troubleshooting………………………………………………………………………………………….9
1 General Information
1.1 Welcome
Thank you for choosing the U100 CDMA2000 1x USB NIC(Network Interface Card). To guarantee
your card always in its best condition, please read this manual carefully.
- Some electronic devices are susceptible to electromagnetic interference sent by NIC if inadequately
shielded, Try to use the terminal at least 20 cm away from TV sets, radio and other automated office
equipment so as to avoid electromagnetic interference.
- Operating of NIC may interfere with medical devices like hearing aides and pacemakers. Consult a
physician or the manufacturer of the medical device before using the NIC.
- Be aware of the usage limitation when using NIC at places such as oil warehouses or chemical
factories, where there are explosive gases or explosive products being processed.
- Do not touch the antenna while calling.
- Please put the NIC on the safe place. The NIC may cause injury if used as a toy by children.
- Do not put other things on the NIC to avoid overlaying radiator.
- Please use original accessories or accessories that are authorized by LINKTOP. Using any
unauthorized accessories may affect your NIC’s performance, hurt your terminal or even cause
danger to your body and violate related national regulations about telecom terminals.
- Do not expose your NIC to direct sunlight or store it in hot areas. High temperatures can shorten the
life of electronic devices.
- Prevent liquid from leaking into your NIC.
- Do not attempt to dismantle the NIC by yourself. Non-expert handling of the devices may damage
them.
- The NIC is not water-resistant, so do not use it in high humidity places such as the bathroom.
- If you want to clean your NIC, please use clean fabric that is a bit wet or anti-static. Take off your NIC
from PC before you clean it.
- Do not use chemical cleaning solvents or strong detergents to clean your NIC, such as alcohol, dilution
agent and benzene.
° °
- Use the NIC within a temperature range of -10 C~55 C and a humidity range of 25%~85%.
- Do not use your terminal during thunderstorm.
- Do not take out your UIM card if there is no necessary. The damaged or lost of UIM card may cause
difficulty in maintenance of the NIC.
2 Getting Start
2.1 Unpacking
Parts Quantity
Main Unit 1
Earphone & Microphone Cable 1
CD 1
2.3 Appearance
Figure 1
2.4.2 Installation
1. Insert audio cable into audio socket
2. If connection requires a R-UIM, insert R-UIM into card socket. Read the direction logo before pushing
the card.
3. Insert NIC into PC USB interface.
4. Wait till the power indicator turns on, run the installation -- Setup.exe to install drivers and client
application
Run the client application software Modem.exe after the NIC’s power led turns on.
Figure 3
3.1.1 Settings
The default username is ‘card’, default password is ‘card’ and default dialing number is ‘#777’.
Change these figures only under instruction from your ISP. Do not forget to click button ‘Save’ to save
your new settings if you have changed something.
Figure 4
3.1.2 Dial
The ‘Status Report’ window logs all operating information. If your NIC cannot access Internet, these logs
will help to diagnose. (Figure 5)
When the NIC access Internet successfully, the client software will start reporting Time Duration, Speed,
Send Bytes and Received Bytes. (Figure 6)
Figure 5 Figure 6
Figure 7
Dialing service supports smart dial service. Smart dial is a more easy and more comfortable way to
retrieve a phone number from Phonebook. When the digits that you dialed are more than 3 digits, the
‘Smart Dial’ will list out all stored phone numbers which match the dialed digits, with the name of the
number. Then you can select a number by double-click on the name. (Figure 8)
Click button ‘Call’ to dial after you have entered a phone number.
Or click button ‘ReCall’ to dial the last call that you have made.
Figure 8
Click ‘Answer’ to receive the call, or click ‘Hangup’ to reject the call.
The caller ID with phone number and caller name will be shown.
The NIC supports 4-level volume and mute. Move the cursor to increase or decrease the volume. Then
click the red cross to close the page.
Figure 9
You can send DTMF tone to network during a call by click the buttons ‘1’~’9’, ‘*’ and ‘#’.
In the call history page, you can read and operate on the Dialed, Received and Missed call records.
Right click on the record, which you want to operate on, to open the submenu. (Figure 10)
Figure 10
Figure 11
Enter the phone number in the ‘Number’ edit box and press Enter (on your PC keypad) to add it into the
number list. Enter your text in the ‘Message’ edit box, it supports maximum 160 ASCII characters.
Figure 12
Click button ‘Send’ to start sending. Or click ‘Save’ to save the text in Outbox without sending.
When you receive an SMS, a new message icon will show in the icon line. And it will switch to
‘Inbox’ page automatically. (Figure 13)
Double click on the Unread SMS to read it. Or you can right click on the SMS to open it by submenu.
(Figure 14)
Figure 13 Figure 14
Message box includes Inbox, Outbox, Sentbox and Template. Every box supports a submenu to operate
on them, right click to open the submenu.
Template box stores 10 template messages. You can edit or append them to your message.
The phone book supports three groups, ‘Family’, ’Friend’ and ‘Office’. And it supports a right-click opened
submenu to operate on the phone numbers. (Figure 15)
Figure 15
Note: Multiple selection for multiple sending SMS. Click on the checkboxes of the phone numbers that
you need to select them. Then right click to open the submenu and click on ‘Send Message’. It will switch
to SMS page and add all numbers in the list.
4 Troubleshooting
Fault Solution
Driver Installation fails a. Make sure your target disk partition has at
lease 50MB free space
Power Led always off a. Make sure the NIC is inserted to PC properly
Client application cannot communicate with NIC a. Insert the NIC to PC, wait until the power led
turns on, then run the application
Accessing Internet fails a. Make sure your R-UIM has applied Internet
service